[coreboot] proposed patch, notsigned off, comments welcome.

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Mon May 12 17:24:09 CEST 2008

On 12.05.2008 17:04, ron minnich wrote:
> On Mon, May 12, 2008 at 6:59 AM, Tom Sylla <tsylla at gmail.com> wrote:
>> This tool is a bit useful already. Can you run it on the alix1c's
>> tinybios (or whatever works best on the alix)? Do all ports of your
>> USB card work on alix with that BIOS? At a minumum, you need to check
>> and make sure that INTs A-D are *really* GPIOs 0, 7, 12, and 13. (and
>> as Peter said, you need to verify how they are hooked up to the slot)
> verified. One bit of verification is that eth0 on schematic matches up
> with eth0 in the $PIR table.
> i'd like to run under tinybios and will try this once I trust the
> tool. or someone can run it for me -- my FLASH on the LPC died.

In theory, the vendor BIOS can be loaded from the dongle.
http://www.pcengines.ch/file/alixbio3.zip has the most recent alix.1c BIOS.


More information about the coreboot mailing list