[coreboot] [PATCH] CN700/VT8237R stage2

[Corey Osgood]

On Tue, Nov 4, 2008 at 9:58 AM, Carl-Daniel Hailfinger <
c-d.hailfinger.devel.2006 at gmx.net> wrote:

> On 01.11.2008 22:28, Carl-Daniel Hailfinger wrote:
> > On 01.11.2008 20:11, Carl-Daniel Hailfinger wrote:
> >
> >> On 01.11.2008 18:56, Corey Osgood wrote:
> >>
> >>
> >>> System reset seems to occur between 2 and 3, both of those logs
> attached,
> >>> along with arch/x86/via/stage1.o With HALT_AFTER=3, the post code keeps
> >>> changing, as expected with the system rebooting, with HALT_AFTER=2 it
> was
> >>> 0xc2.
> >>>
> >>>
> >>>
> >> Great results, thanks a lot!
> >> One bug spotted and fixed. Can you retest with the same method and the
> >> updated patch attached to this mail? I hope it will die much later,
> >> perhaps at HALT_AFTER=13 or so.
> >>
> >>
> >
> > Thanks for the information that HALT_AFTER=5 is the last working setting.
> >
>
> OK, I reread every line of the code and reimplemented the problematic
> stuff from scratch.
>
> Can you try the new patch with HALT_AFTER=5 and 6? I'm pretty confident
> that if 6 works, all later numbers should also not reboot.
> By the way, the new code should be even better than the (working) v2 code.


I'll test it out this evening, thanks!

-Corey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081104/841f7803/attachment.html>