[coreboot] and/or busybox issue with alix2c3 serial console
leroi.lists at gmail.com
Wed Nov 5 10:20:58 CET 2008
On Wed, Nov 5, 2008 at 3:24 AM, Jordan Crouse <jordan.crouse at amd.com> wrote:
> It just occured to me, I use a busybox based image for my Geode... :)
> I gzipped up the ext2 filesystem and put it here:
> This uses busybox 1.9.2 and kernel 2.6.27. There is a menu.lst in /boot,
> but the root points to the wrong place. Use
> kernel /boot/bzImage root=/dev/hda1 console=tty0 console=ttyS0,115200
> I just booted it with a fresh version of v3 and all was well. Good
Tried your image but no luck. Same behaviour. No serial console.
All it gave to serial console while booting is in attachment.
Does it have some ip address and telnet/ssh server? So I could at
least ping it and see if it booted at all.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
More information about the coreboot