[coreboot] [patch] and/or busybox issue with alix2c3 serial console
leroi.lists at gmail.com
Wed Nov 5 22:35:34 CET 2008
On Wed, Nov 5, 2008 at 8:09 PM, Marc Jones <Marc.Jones at amd.com> wrote:
> I see the problem. It is interesting that in some situations that it works.
> Marc Jones
> Senior Firmware Engineer
> (970) 226-9684 Office
> mailto:Marc.Jones at amd.com
> LPC serial IRQs were being left enabled when there is no LPC serial device.
> Signed-off-by: Marc Jones <marc.jones at amd.com>
> Index: mainboard/pcengines/alix2c3/dts
> --- mainboard/pcengines/alix2c3/dts (revision 980)
> +++ mainboard/pcengines/alix2c3/dts (working copy)
> @@ -34,9 +34,9 @@
> /* Interrupt enables for LPC bus.
> * Each bit is an IRQ 0-15. */
> - lpc_serirq_enable = "0x0000105A";
> + lpc_serirq_enable = "0x00001002";
> /* LPC IRQ polarity. Each bit is an IRQ 0-15. */
> - lpc_serirq_polarity = "0x0000EFA5";
> + lpc_serirq_polarity = "0x0000EFFD";
> /* 0:continuous 1:quiet */
> lpc_serirq_mode = "1";
> /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none.
tried this with my mods but didn't work
will try a clean build now..
More information about the coreboot