[coreboot] r899 - in coreboot-v3/arch/x86: . i586
svn at coreboot.org
svn at coreboot.org
Tue Oct 7 01:06:33 CEST 2008
Author: hailfinger
Date: 2008-10-07 01:06:32 +0200 (Tue, 07 Oct 2008)
New Revision: 899
Added:
coreboot-v3/arch/x86/i586/
coreboot-v3/arch/x86/i586/stage0.S
Removed:
coreboot-v3/arch/x86/intel/
coreboot-v3/arch/x86/stage0_i586.S
Modified:
coreboot-v3/arch/x86/Makefile
Log:
Move the generic intel x86 init code in arch/x86/stage0_i586.S to
arch/x86/i586/stage0.S to make it consistent with the other variants of
that code.
Clean up two superfluous rules from arch/x86/Makefile which were needed
before. That makefile change also fixes a latent bug which may have been
exposed by later additions to the tree.
Compile tested on all arches.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Peter Stuge <peter at stuge.se>
Modified: coreboot-v3/arch/x86/Makefile
===================================================================
--- coreboot-v3/arch/x86/Makefile 2008-10-06 17:17:40 UTC (rev 898)
+++ coreboot-v3/arch/x86/Makefile 2008-10-06 23:06:32 UTC (rev 899)
@@ -112,7 +112,7 @@
endif
ifeq ($(CONFIG_CPU_I586),y)
- STAGE0_CAR_OBJ = stage0_i586.o
+ STAGE0_CAR_OBJ = i586/stage0.o
else
ifeq ($(CONFIG_CPU_AMD_GEODELX),y)
STAGE0_CAR_OBJ = geodelx/stage0.o
@@ -243,15 +243,7 @@
$(Q)$(CC) $(INITCFLAGS) -c $< -o $@
# Building asm stub.
-$(obj)/arch/x86/stage0%.o: $(src)/arch/x86/stage0%.S
- $(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n"
- $(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
- -o $(obj)/arch/x86/stage0_asm.s -DBOOTBLK=0x1f00 \
- -DRESRVED=0xf0 -DDATE=\"`date +%Y/%m/%d`\"
- $(Q)printf " AS $(subst $(shell pwd)/,,$(@))\n"
- $(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
-
-$(obj)/arch/x86/geodelx/stage0.o: $(src)/arch/x86/geodelx/stage0.S
+$(obj)/arch/x86/%/stage0.o: $(src)/arch/x86/%/stage0.S
$(Q)mkdir -p $(dir $@)
$(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
@@ -260,18 +252,6 @@
$(Q)printf " AS $(subst $(shell pwd)/,,$(@))\n"
$(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
-
-# NOTE HACK. Stefan will fix this :-)
-$(obj)/arch/x86/amd/stage0.o: $(src)/arch/x86/amd/stage0.S
- $(Q)mkdir -p $(dir $@)
- $(Q)printf " CC $(subst $(shell pwd)/,,$(@))\n"
- $(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
- -I $(src)/include/arch/x86/amd/k8 \
- -o $(obj)/arch/x86/stage0_asm.s -DBOOTBLK=0x1f00 \
- -DRESRVED=0xf0 -DDATE=\"`date +%Y/%m/%d`\"
- $(Q)printf " AS $(subst $(shell pwd)/,,$(@))\n"
- $(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
-
$(obj)/coreboot.initram $(obj)/coreboot.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_SRC)
$(Q)printf " CC $(subst $(shell pwd)/,,$(@)) (XIP)\n"
$(Q)$(CC) $(INITCFLAGS) -fPIE -c -combine $(COMBINEFLAGS) $(INITRAM_SRC) -o $(obj)/coreboot.initram_partiallylinked.o
Copied: coreboot-v3/arch/x86/i586/stage0.S (from rev 898, coreboot-v3/arch/x86/stage0_i586.S)
===================================================================
--- coreboot-v3/arch/x86/i586/stage0.S (rev 0)
+++ coreboot-v3/arch/x86/i586/stage0.S 2008-10-06 23:06:32 UTC (rev 899)
@@ -0,0 +1,498 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2000,2007 Ronald G. Minnich <rminnich at gmail.com>
+## Copyright (C) 2005 Eswar Nallusamy, LANL
+## Copyright (C) 2005 Tyan
+## (Written by Yinghai Lu <yhlu at tyan.com> for Tyan)
+## Copyright (C) 2007 coresystems GmbH
+## (Written by Stefan Reinauer <stepan at coresystems.de> for coresystems GmbH)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# init code - switch cpu to pmode and enable cache as ram.
+
+#include <macros.h>
+
+#define ROM_CODE_SEG 0x08
+#define ROM_DATA_SEG 0x10
+
+#define CACHE_RAM_CODE_SEG 0x18
+#define CACHE_RAM_DATA_SEG 0x20
+ .code16
+ .globl _stage0
+_stage0:
+ cli
+
+ /* save the BIST result */
+ movl %eax, %ebp;
+
+ /* thanks to kmliu at sis.tw.com for this TLB fix */
+ /* IMMEDIATELY invalidate the translation lookaside buffer before
+ * executing any further code. Even though paging is disabled we
+ * could still get false address translations due to the TLB if we
+ * didn't invalidate it.
+ */
+
+ xorl %eax, %eax
+ movl %eax, %cr3 /* Invalidate TLB */
+
+ /* switch to protected mode */
+
+ /* NOTE: With GNU assembler version 2.15.94.0.2.2 (i386-redhat-linux)
+ * using BFD version 2.15.94.0.2.2 20041220 this works fine without all
+ * the ld hackery and other things. So leave it as is with this comment.
+ */
+
+ data32 lgdt %cs:gdtptr
+
+ movl %cr0, %eax
+ andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
+ orl $0x60000001, %eax /* CD, NW, PE = 1 */
+ movl %eax, %cr0
+
+ /* Restore BIST result */
+ movl %ebp, %eax
+
+
+ // port80_post (0x23) /* post 0x01 */
+ /* Now we are in protected mode. Jump to a 32 bit code segment. */
+ data32 ljmp $ROM_CODE_SEG, $protected_stage0
+ /* I am leaving this weird jump in here in the event that future gas bugs force it to be used. */
+ #.byte 0x66
+ .code32
+ #ljmp $ROM_CODE_SEG, $protected_stage0
+
+ #.code16
+ .align 4
+ .globl gdt16
+gdt16 = . - _stage0
+gdt16x:
+ .word gdt16xend - gdt16x -1 /* compute the table limit */
+ .long gdt16x
+ .word 0
+
+ /* selgdt 0x08, flat code segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x9b, 0xcf, 0x00
+
+ /* selgdt 0x10,flat data segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x93, 0xcf, 0x00
+gdt16xend:
+
+ /* From now on we are 32bit */
+
+ .code32
+
+/* We have two gdts where we could have one. That is ok.
+ *
+ * Let's not worry about this -- optimizing gdt is pointless since we're
+ * only in it for a little bit.
+ *
+ * BTW note the trick below: The GDT points to ITSELF, and the first good
+ * descriptor is at offset 8. So you word-align the table, and then because
+ * you chose 8, you get a nice 64-bit aligned GDT entry, which is good as
+ * this is the size of the entry.
+ * Just in case you ever wonder why people do this.
+ */
+ .align 4
+ .globl gdtptr
+ .globl gdt_limit
+gdt_limit = gdt_end - gdt - 1 /* compute the table limit */
+
+gdt:
+gdtptr:
+ .word gdt_end - gdt -1 /* compute the table limit */
+ .long gdt /* we know the offset */
+ .word 0
+
+ /* selgdt 0x08, flat code segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x9b, 0xcf, 0x00
+
+ /* selgdt 0x10,flat data segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x93, 0xcf, 0x00
+
+ /* selgdt 0x18, flat code segment for CAR */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x9b, 0xcf, 0x00
+
+ /* selgdt 0x20,flat data segment for CAR */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x93, 0xcf, 0x00
+gdt_end:
+
+/*
+ * When we come here we are in protected mode. We expand
+ * the stack and copies the data segment from ROM to the
+ * memory.
+ *
+ * After that, we call the chipset bootstrap routine that
+ * does what is left of the chipset initialization.
+ *
+ * NOTE: Aligned to 4 so that we are sure that the prefetch
+ * cache will be reloaded.
+ */
+
+ .align 4
+ .globl protected_stage0
+protected_stage0:
+ //This code was used by v2. TODO
+ lgdt %cs:gdtptr
+ ljmp $ROM_CODE_SEG, $__protected_stage0
+
+.globl __protected_stage0
+__protected_stage0:
+ /* Save the BIST value */
+ movl %eax, %ebp
+
+ port80_post (0x01) /* post 0x01 */
+
+ movw $ROM_DATA_SEG, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ movw %ax, %fs
+ movw %ax, %gs
+
+ /* Restore the BIST value to %eax */
+ movl %ebp, %eax
+
+.align 4
+
+
+
+/* We will use 4Kbytes only for cache as ram. This is
+ * enough to fit in our stack.
+ *
+ * disable HyperThreading is done by eswar
+ * the other is very similar to the AMD CAR, except remove amd specific msr
+ */
+
+#define CacheSize CONFIG_CARSIZE
+
+#define CacheBase CONFIG_CARBASE
+
+#define ASSEMBLY
+#include "mtrr.h"
+
+ /* Save the BIST result */
+ movl %eax, %ebp
+
+CacheAsRam:
+ /* Check whether the processor has HT capability */
+ movl $01, %eax
+ cpuid
+ btl $28, %edx
+ jnc NotHtProcessor
+ bswapl %ebx
+ cmpb $01, %bh
+ jbe NotHtProcessor
+
+ /* It is a HT processor; Send SIPI to the other logical processor
+ * within this processor so that the CAR related common system
+ * registers are programmed accordingly
+ */
+
+ /* Use some register that is common to both logical processors
+ * as semaphore. Refer Appendix B, Vol.3
+ */
+
+ xorl %eax, %eax
+ xorl %edx, %edx
+ movl $0x250, %ecx
+ wrmsr
+
+ /* Figure out the logical AP's APIC ID; the following logic will work
+ * only for processors with 2 threads.
+ *
+ * Refer to Vol 3. Table 7-1 for details about this logic
+ */
+ movl $0xFEE00020, %esi
+ movl (%esi), %ebx
+ andl $0xFF000000, %ebx
+ bswapl %ebx
+ btl $0, %ebx
+ jnc LogicalAP0
+ andb $0xFE, %bl
+ jmp SendSIPI
+LogicalAP0:
+ orb $0x01, %bl
+SendSIPI:
+ bswapl %ebx /* ebx - logical AP's APIC ID */
+
+ /* Fill up the IPI command registers in the Local APIC mapped to
+ * default address and issue SIPI to the other logical processor
+ * within this processor die.
+ */
+
+RetrySIPI:
+ movl %ebx, %eax
+ movl $0xFEE00310, %esi
+ movl %eax, (%esi)
+
+ /* SIPI vector - F900:0000 */
+ movl $0x000006F9, %eax
+ movl $0xFEE00300, %esi
+ movl %eax, (%esi)
+
+ movl $0x30, %ecx
+SIPIDelay:
+ pause
+ decl %ecx
+ jnz SIPIDelay
+
+ movl (%esi), %eax
+ andl $0x00001000, %eax
+ jnz RetrySIPI
+
+ /* Wait for the Logical AP to complete initialization */
+LogicalAPSIPINotdone:
+ movl $0x250, %ecx
+ rdmsr
+ orl %eax, %eax
+ jz LogicalAPSIPINotdone
+
+
+
+NotHtProcessor:
+ /* Set the default memory type and enable fixed and variable MTRRs */
+ movl $MTRRdefType_MSR, %ecx
+ xorl %edx, %edx
+ /* Enable Variable and Fixed MTRRs */
+ movl $0x00000c00, %eax
+ wrmsr
+
+ /*Clear all MTRRs */
+ xorl %edx, %edx
+ movl $fixed_mtrr_msr, %esi
+clear_fixed_var_mtrr:
+ lodsl (%esi), %eax
+ testl %eax, %eax
+ jz clear_fixed_var_mtrr_out
+
+ movl %eax, %ecx
+ xorl %eax, %eax
+ wrmsr
+
+ jmp clear_fixed_var_mtrr
+clear_fixed_var_mtrr_out:
+
+/* 0x06 is the WB IO type for a given 4k segment.
+ * segs is the number of 4k segments in the area of the particular
+ * register we want to use for CAR.
+ * reg is the register where the IO type should be stored.
+ */
+.macro extractmask segs, reg
+.if \segs <= 0
+ /* The xorl here is superfluous because at the point of first execution
+ * of this macro, %eax and %edx are cleared. Later invocations of this
+ * macro will have a monotonically increasing segs parameter.
+ */
+ xorl \reg, \reg
+.elseif \segs == 1
+ movl $0x06000000, \reg
+.elseif \segs == 2
+ movl $0x06060000, \reg
+.elseif \segs == 3
+ movl $0x06060600, \reg
+.elseif \segs >= 4
+ movl $0x06060606, \reg
+.endif
+.endm
+
+/* size is the cache size in bytes we want to use for CAR.
+ * windowoffset is the 32k-aligned window into CAR size
+ */
+.macro simplemask carsize, windowoffset
+/* DO NOT CHANGE THE FORMATTING of the two lines below! Whitespace is
+ * interpreted as an argument delimiter by some versions of GNU as. */
+ extractmask (((\carsize-\windowoffset)/0x1000)-4), %eax
+ extractmask (((\carsize-\windowoffset)/0x1000)), %edx
+.endm
+
+#if CacheSize > 0x10000
+#error Invalid CAR size, must be at most 64k.
+#endif
+#if CacheSize < 0x1000
+#error Invalid CAR size, must be at least 4k. This is a processor limitation.
+#endif
+#if (CacheSize & (0x1000 - 1))
+#error Invalid CAR size, is not a multiple of 4k. This is a processor limitation.
+#endif
+
+#if CacheSize > 0x8000
+ /* enable caching for 32K-64K using fixed mtrr */
+ movl $0x268, %ecx /* fix4k_c0000*/
+ simplemask CacheSize, 0x8000
+ wrmsr
+#endif
+
+ /* enable caching for 0-32K using fixed mtrr */
+ movl $0x269, %ecx /* fix4k_c8000*/
+ simplemask CacheSize, 0
+ wrmsr
+
+#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE)
+ /* enable write base caching so we can do execute in place
+ * on the flash rom.
+ */
+ movl $0x202, %ecx
+ xorl %edx, %edx
+ movl $(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax
+ wrmsr
+
+ movl $0x203, %ecx
+ movl $0x0000000f, %edx
+ movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax
+ wrmsr
+#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */
+
+ /* enable cache */
+ movl %cr0, %eax
+ andl $0x9fffffff,%eax
+ movl %eax, %cr0
+
+ /* Read the range with lodsl*/
+ movl $CacheBase, %esi
+ cld
+ movl $(CacheSize>>2), %ecx
+ rep lodsl
+
+ /* Clear the range */
+ movl $CacheBase, %edi
+ movl $(CacheSize>>2), %ecx
+ xorl %eax, %eax
+ rep stosl
+
+
+ /* TODO: make this a config variable */
+#if CONFIG_CARTEST
+ /* check the cache as ram */
+ movl $CacheBase, %esi
+ movl $(CacheSize>>2), %ecx
+.xin1:
+ movl %esi, %eax
+ movl %eax, (%esi)
+ decl %ecx
+ je .xout1
+ add $4, %esi
+ jmp .xin1
+.xout1:
+
+ movl $CacheBase, %esi
+// movl $(CacheSize>>2), %ecx
+ movl $4, %ecx
+.xin1x:
+ movl %esi, %eax
+
+ movl $0x4000, %edx
+ movb %ah, %al
+.testx1:
+ outb %al, $0x80
+ decl %edx
+ jnz .testx1
+
+ movl (%esi), %eax
+ cmpb 0xff, %al
+ je .xin2 /* dont show */
+
+ movl $0x4000, %edx
+.testx2:
+ outb %al, $0x80
+ decl %edx
+ jnz .testx2
+
+.xin2: decl %ecx
+ je .xout1x
+ add $4, %esi
+ jmp .xin1x
+.xout1x:
+
+#endif
+
+ movl $(CacheBase+CacheSize-4), %eax
+ movl %eax, %esp
+
+ /* Load a different set of data segments */
+ movw $CACHE_RAM_DATA_SEG, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+
+lout:
+ /* Store zero for the pointer to the global variables. */
+ movl $0, %eax
+ pushl %eax
+
+ /* Store zero for the unused init_detected parameter. */
+ pushl %eax
+
+ /* Restore the BIST result */
+ movl %ebp, %eax
+ /* We need to set ebp ? No need */
+ movl %esp, %ebp
+ pushl %eax /* bist */
+ call stage1_main
+ /* We will not go back */
+fixed_mtrr_msr:
+ .long 0x250, 0x258, 0x259
+ .long 0x268, 0x269, 0x26A
+ .long 0x26B, 0x26C, 0x26D
+ .long 0x26E, 0x26F
+var_mtrr_msr:
+ .long 0x200, 0x201, 0x202, 0x203
+ .long 0x204, 0x205, 0x206, 0x207
+ .long 0x208, 0x209, 0x20A, 0x20B
+ .long 0x20C, 0x20D, 0x20E, 0x20F
+ .long 0x000 /* NULL, end of table */
+
+# Reset vector.
+
+/*
+ RVECTOR: size of reset vector, default is 0x10
+ RESRVED: size of vpd code, default is 0xf0
+ BOOTBLK: size of bootblock code, default is 0x1f00 (8k-256b)
+*/
+
+SEGMENT_SIZE = 0x10000
+RVECTOR = 0x00010
+# Due to YET ANOTHER BUG in GNU bintools, you can NOT have a code16 here.
+# I think we should leave it this way forever, as the bugs come and
+# go -- and come again.
+# .code16
+# .section ".rom.text"
+.section ".reset", "ax"
+ .globl _resetjump
+_resetjump:
+ /* GNU bintools bugs again. This jumps to stage0 - 2. Sigh. */
+# jmp _stage0
+ .byte 0xe9
+ .int _stage0 - ( . + 2 )
+ /* Note: The above jump is hand coded to work around bugs in binutils.
+ * 5 byte are used for a 3 byte instruction. This works because x86
+ * is little endian and allows us to use supported 32bit relocations
+ * instead of the weird 16 bit relocations that binutils does not
+ * handle consistenly between versions because they are used so rarely.
+ */
+.byte 0
+
+# Date? ID string? We might want to put something else in here.
+.ascii DATE
+
+# Checksum.
+#.word 0
Deleted: coreboot-v3/arch/x86/stage0_i586.S
===================================================================
--- coreboot-v3/arch/x86/stage0_i586.S 2008-10-06 17:17:40 UTC (rev 898)
+++ coreboot-v3/arch/x86/stage0_i586.S 2008-10-06 23:06:32 UTC (rev 899)
@@ -1,498 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2000,2007 Ronald G. Minnich <rminnich at gmail.com>
-## Copyright (C) 2005 Eswar Nallusamy, LANL
-## Copyright (C) 2005 Tyan
-## (Written by Yinghai Lu <yhlu at tyan.com> for Tyan)
-## Copyright (C) 2007 coresystems GmbH
-## (Written by Stefan Reinauer <stepan at coresystems.de> for coresystems GmbH)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-# init code - switch cpu to pmode and enable cache as ram.
-
-#include <macros.h>
-
-#define ROM_CODE_SEG 0x08
-#define ROM_DATA_SEG 0x10
-
-#define CACHE_RAM_CODE_SEG 0x18
-#define CACHE_RAM_DATA_SEG 0x20
- .code16
- .globl _stage0
-_stage0:
- cli
-
- /* save the BIST result */
- movl %eax, %ebp;
-
- /* thanks to kmliu at sis.tw.com for this TLB fix */
- /* IMMEDIATELY invalidate the translation lookaside buffer before
- * executing any further code. Even though paging is disabled we
- * could still get false address translations due to the TLB if we
- * didn't invalidate it.
- */
-
- xorl %eax, %eax
- movl %eax, %cr3 /* Invalidate TLB */
-
- /* switch to protected mode */
-
- /* NOTE: With GNU assembler version 2.15.94.0.2.2 (i386-redhat-linux)
- * using BFD version 2.15.94.0.2.2 20041220 this works fine without all
- * the ld hackery and other things. So leave it as is with this comment.
- */
-
- data32 lgdt %cs:gdtptr
-
- movl %cr0, %eax
- andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
- orl $0x60000001, %eax /* CD, NW, PE = 1 */
- movl %eax, %cr0
-
- /* Restore BIST result */
- movl %ebp, %eax
-
-
- // port80_post (0x23) /* post 0x01 */
- /* Now we are in protected mode. Jump to a 32 bit code segment. */
- data32 ljmp $ROM_CODE_SEG, $protected_stage0
- /* I am leaving this weird jump in here in the event that future gas bugs force it to be used. */
- #.byte 0x66
- .code32
- #ljmp $ROM_CODE_SEG, $protected_stage0
-
- #.code16
- .align 4
- .globl gdt16
-gdt16 = . - _stage0
-gdt16x:
- .word gdt16xend - gdt16x -1 /* compute the table limit */
- .long gdt16x
- .word 0
-
- /* selgdt 0x08, flat code segment */
- .word 0xffff, 0x0000
- .byte 0x00, 0x9b, 0xcf, 0x00
-
- /* selgdt 0x10,flat data segment */
- .word 0xffff, 0x0000
- .byte 0x00, 0x93, 0xcf, 0x00
-gdt16xend:
-
- /* From now on we are 32bit */
-
- .code32
-
-/* We have two gdts where we could have one. That is ok.
- *
- * Let's not worry about this -- optimizing gdt is pointless since we're
- * only in it for a little bit.
- *
- * BTW note the trick below: The GDT points to ITSELF, and the first good
- * descriptor is at offset 8. So you word-align the table, and then because
- * you chose 8, you get a nice 64-bit aligned GDT entry, which is good as
- * this is the size of the entry.
- * Just in case you ever wonder why people do this.
- */
- .align 4
- .globl gdtptr
- .globl gdt_limit
-gdt_limit = gdt_end - gdt - 1 /* compute the table limit */
-
-gdt:
-gdtptr:
- .word gdt_end - gdt -1 /* compute the table limit */
- .long gdt /* we know the offset */
- .word 0
-
- /* selgdt 0x08, flat code segment */
- .word 0xffff, 0x0000
- .byte 0x00, 0x9b, 0xcf, 0x00
-
- /* selgdt 0x10,flat data segment */
- .word 0xffff, 0x0000
- .byte 0x00, 0x93, 0xcf, 0x00
-
- /* selgdt 0x18, flat code segment for CAR */
- .word 0xffff, 0x0000
- .byte 0x00, 0x9b, 0xcf, 0x00
-
- /* selgdt 0x20,flat data segment for CAR */
- .word 0xffff, 0x0000
- .byte 0x00, 0x93, 0xcf, 0x00
-gdt_end:
-
-/*
- * When we come here we are in protected mode. We expand
- * the stack and copies the data segment from ROM to the
- * memory.
- *
- * After that, we call the chipset bootstrap routine that
- * does what is left of the chipset initialization.
- *
- * NOTE: Aligned to 4 so that we are sure that the prefetch
- * cache will be reloaded.
- */
-
- .align 4
- .globl protected_stage0
-protected_stage0:
- //This code was used by v2. TODO
- lgdt %cs:gdtptr
- ljmp $ROM_CODE_SEG, $__protected_stage0
-
-.globl __protected_stage0
-__protected_stage0:
- /* Save the BIST value */
- movl %eax, %ebp
-
- port80_post (0x01) /* post 0x01 */
-
- movw $ROM_DATA_SEG, %ax
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %ss
- movw %ax, %fs
- movw %ax, %gs
-
- /* Restore the BIST value to %eax */
- movl %ebp, %eax
-
-.align 4
-
-
-
-/* We will use 4Kbytes only for cache as ram. This is
- * enough to fit in our stack.
- *
- * disable HyperThreading is done by eswar
- * the other is very similar to the AMD CAR, except remove amd specific msr
- */
-
-#define CacheSize CONFIG_CARSIZE
-
-#define CacheBase CONFIG_CARBASE
-
-#define ASSEMBLY
-#include "mtrr.h"
-
- /* Save the BIST result */
- movl %eax, %ebp
-
-CacheAsRam:
- /* Check whether the processor has HT capability */
- movl $01, %eax
- cpuid
- btl $28, %edx
- jnc NotHtProcessor
- bswapl %ebx
- cmpb $01, %bh
- jbe NotHtProcessor
-
- /* It is a HT processor; Send SIPI to the other logical processor
- * within this processor so that the CAR related common system
- * registers are programmed accordingly
- */
-
- /* Use some register that is common to both logical processors
- * as semaphore. Refer Appendix B, Vol.3
- */
-
- xorl %eax, %eax
- xorl %edx, %edx
- movl $0x250, %ecx
- wrmsr
-
- /* Figure out the logical AP's APIC ID; the following logic will work
- * only for processors with 2 threads.
- *
- * Refer to Vol 3. Table 7-1 for details about this logic
- */
- movl $0xFEE00020, %esi
- movl (%esi), %ebx
- andl $0xFF000000, %ebx
- bswapl %ebx
- btl $0, %ebx
- jnc LogicalAP0
- andb $0xFE, %bl
- jmp SendSIPI
-LogicalAP0:
- orb $0x01, %bl
-SendSIPI:
- bswapl %ebx /* ebx - logical AP's APIC ID */
-
- /* Fill up the IPI command registers in the Local APIC mapped to
- * default address and issue SIPI to the other logical processor
- * within this processor die.
- */
-
-RetrySIPI:
- movl %ebx, %eax
- movl $0xFEE00310, %esi
- movl %eax, (%esi)
-
- /* SIPI vector - F900:0000 */
- movl $0x000006F9, %eax
- movl $0xFEE00300, %esi
- movl %eax, (%esi)
-
- movl $0x30, %ecx
-SIPIDelay:
- pause
- decl %ecx
- jnz SIPIDelay
-
- movl (%esi), %eax
- andl $0x00001000, %eax
- jnz RetrySIPI
-
- /* Wait for the Logical AP to complete initialization */
-LogicalAPSIPINotdone:
- movl $0x250, %ecx
- rdmsr
- orl %eax, %eax
- jz LogicalAPSIPINotdone
-
-
-
-NotHtProcessor:
- /* Set the default memory type and enable fixed and variable MTRRs */
- movl $MTRRdefType_MSR, %ecx
- xorl %edx, %edx
- /* Enable Variable and Fixed MTRRs */
- movl $0x00000c00, %eax
- wrmsr
-
- /*Clear all MTRRs */
- xorl %edx, %edx
- movl $fixed_mtrr_msr, %esi
-clear_fixed_var_mtrr:
- lodsl (%esi), %eax
- testl %eax, %eax
- jz clear_fixed_var_mtrr_out
-
- movl %eax, %ecx
- xorl %eax, %eax
- wrmsr
-
- jmp clear_fixed_var_mtrr
-clear_fixed_var_mtrr_out:
-
-/* 0x06 is the WB IO type for a given 4k segment.
- * segs is the number of 4k segments in the area of the particular
- * register we want to use for CAR.
- * reg is the register where the IO type should be stored.
- */
-.macro extractmask segs, reg
-.if \segs <= 0
- /* The xorl here is superfluous because at the point of first execution
- * of this macro, %eax and %edx are cleared. Later invocations of this
- * macro will have a monotonically increasing segs parameter.
- */
- xorl \reg, \reg
-.elseif \segs == 1
- movl $0x06000000, \reg
-.elseif \segs == 2
- movl $0x06060000, \reg
-.elseif \segs == 3
- movl $0x06060600, \reg
-.elseif \segs >= 4
- movl $0x06060606, \reg
-.endif
-.endm
-
-/* size is the cache size in bytes we want to use for CAR.
- * windowoffset is the 32k-aligned window into CAR size
- */
-.macro simplemask carsize, windowoffset
-/* DO NOT CHANGE THE FORMATTING of the two lines below! Whitespace is
- * interpreted as an argument delimiter by some versions of GNU as. */
- extractmask (((\carsize-\windowoffset)/0x1000)-4), %eax
- extractmask (((\carsize-\windowoffset)/0x1000)), %edx
-.endm
-
-#if CacheSize > 0x10000
-#error Invalid CAR size, must be at most 64k.
-#endif
-#if CacheSize < 0x1000
-#error Invalid CAR size, must be at least 4k. This is a processor limitation.
-#endif
-#if (CacheSize & (0x1000 - 1))
-#error Invalid CAR size, is not a multiple of 4k. This is a processor limitation.
-#endif
-
-#if CacheSize > 0x8000
- /* enable caching for 32K-64K using fixed mtrr */
- movl $0x268, %ecx /* fix4k_c0000*/
- simplemask CacheSize, 0x8000
- wrmsr
-#endif
-
- /* enable caching for 0-32K using fixed mtrr */
- movl $0x269, %ecx /* fix4k_c8000*/
- simplemask CacheSize, 0
- wrmsr
-
-#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE)
- /* enable write base caching so we can do execute in place
- * on the flash rom.
- */
- movl $0x202, %ecx
- xorl %edx, %edx
- movl $(XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax
- wrmsr
-
- movl $0x203, %ecx
- movl $0x0000000f, %edx
- movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax
- wrmsr
-#endif /* XIP_ROM_SIZE && XIP_ROM_BASE */
-
- /* enable cache */
- movl %cr0, %eax
- andl $0x9fffffff,%eax
- movl %eax, %cr0
-
- /* Read the range with lodsl*/
- movl $CacheBase, %esi
- cld
- movl $(CacheSize>>2), %ecx
- rep lodsl
-
- /* Clear the range */
- movl $CacheBase, %edi
- movl $(CacheSize>>2), %ecx
- xorl %eax, %eax
- rep stosl
-
-
- /* TODO: make this a config variable */
-#if CONFIG_CARTEST
- /* check the cache as ram */
- movl $CacheBase, %esi
- movl $(CacheSize>>2), %ecx
-.xin1:
- movl %esi, %eax
- movl %eax, (%esi)
- decl %ecx
- je .xout1
- add $4, %esi
- jmp .xin1
-.xout1:
-
- movl $CacheBase, %esi
-// movl $(CacheSize>>2), %ecx
- movl $4, %ecx
-.xin1x:
- movl %esi, %eax
-
- movl $0x4000, %edx
- movb %ah, %al
-.testx1:
- outb %al, $0x80
- decl %edx
- jnz .testx1
-
- movl (%esi), %eax
- cmpb 0xff, %al
- je .xin2 /* dont show */
-
- movl $0x4000, %edx
-.testx2:
- outb %al, $0x80
- decl %edx
- jnz .testx2
-
-.xin2: decl %ecx
- je .xout1x
- add $4, %esi
- jmp .xin1x
-.xout1x:
-
-#endif
-
- movl $(CacheBase+CacheSize-4), %eax
- movl %eax, %esp
-
- /* Load a different set of data segments */
- movw $CACHE_RAM_DATA_SEG, %ax
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %ss
-
-lout:
- /* Store zero for the pointer to the global variables. */
- movl $0, %eax
- pushl %eax
-
- /* Store zero for the unused init_detected parameter. */
- pushl %eax
-
- /* Restore the BIST result */
- movl %ebp, %eax
- /* We need to set ebp ? No need */
- movl %esp, %ebp
- pushl %eax /* bist */
- call stage1_main
- /* We will not go back */
-fixed_mtrr_msr:
- .long 0x250, 0x258, 0x259
- .long 0x268, 0x269, 0x26A
- .long 0x26B, 0x26C, 0x26D
- .long 0x26E, 0x26F
-var_mtrr_msr:
- .long 0x200, 0x201, 0x202, 0x203
- .long 0x204, 0x205, 0x206, 0x207
- .long 0x208, 0x209, 0x20A, 0x20B
- .long 0x20C, 0x20D, 0x20E, 0x20F
- .long 0x000 /* NULL, end of table */
-
-# Reset vector.
-
-/*
- RVECTOR: size of reset vector, default is 0x10
- RESRVED: size of vpd code, default is 0xf0
- BOOTBLK: size of bootblock code, default is 0x1f00 (8k-256b)
-*/
-
-SEGMENT_SIZE = 0x10000
-RVECTOR = 0x00010
-# Due to YET ANOTHER BUG in GNU bintools, you can NOT have a code16 here.
-# I think we should leave it this way forever, as the bugs come and
-# go -- and come again.
-# .code16
-# .section ".rom.text"
-.section ".reset", "ax"
- .globl _resetjump
-_resetjump:
- /* GNU bintools bugs again. This jumps to stage0 - 2. Sigh. */
-# jmp _stage0
- .byte 0xe9
- .int _stage0 - ( . + 2 )
- /* Note: The above jump is hand coded to work around bugs in binutils.
- * 5 byte are used for a 3 byte instruction. This works because x86
- * is little endian and allows us to use supported 32bit relocations
- * instead of the weird 16 bit relocations that binutils does not
- * handle consistenly between versions because they are used so rarely.
- */
-.byte 0
-
-# Date? ID string? We might want to put something else in here.
-.ascii DATE
-
-# Checksum.
-#.word 0
More information about the coreboot
mailing list