[coreboot] alix.2c3 stops at mainboard_pre_payload: done

ron minnich rminnich at gmail.com
Thu Oct 9 16:33:23 CEST 2008

On Thu, Oct 9, 2008 at 1:25 AM, Roman Yeryomin <leroi.lists at gmail.com> wrote:

> LAR: Attempting to open 'normal/payload/segment0'.
> LAR: Start 0xfff80000 len 0x80000
> LAR: seen member normal/option_table at 0xfff80000, size 1200
> LAR: seen member normal/initram/segment0 at 0xfff80500, size 5976
> LAR: seen member normal/stage2/segment0 at 0xfff81cb0, size 1
> LAR: seen member normal/stage2/segment1 at 0xfff81d10, size 18500
> LAR: seen member normal/stage2/segment2 at 0xfff865b0, size 403
> LAR: seen member normal/payload at 0xfff867a0, size 17963
> LAR: seen member blob/vsa at 0xfff8ae10, size 30374
> LAR: seen member zerofill at 0xfff92500, size 428671
> LAR: seen member bootblock at 0xffffafc0, size 20480
> LAR: File not found!
> LAR: load_file: No such file 'normal/payload/segment0'
> LAR: load_file_segments: Failed for normal/payload
> FATAL: No usable payload found.

your build is misconfigured somehow.

You are loading an ELF payload and ELF is not built in as part of your build.

2 suggestions: get an image from someone else that is "known good",
and burn and test it. That will verify hardware. Second, send us your
v3 config file. Something is wrong with your build.


More information about the coreboot mailing list