[coreboot] alix.2c3 stops at mainboard_pre_payload: done

ron minnich rminnich at gmail.com
Thu Oct 9 21:18:27 CEST 2008


On Thu, Oct 9, 2008 at 12:11 PM, Roman Yeryomin <leroi.lists at gmail.com> wrote:


> ./build/util/lar/lar -l bios.bin
>  normal/option_table (1200 bytes @0x50);loadaddress 0x0 entry 0x0
>  normal/initram/segment0 (5976 bytes @0x550);loadaddress 0x0 entry 0x0x1015
>  normal/stage2/segment0 (194760 bytes, zeroes compressed to 1 bytes
> @0x1d00);loadaddress 0x0xd014 entry 0x0x2000
>  normal/stage2/segment1 (34752 bytes @0x1d60);loadaddress 0x0x2000
> entry 0x0x2000
>  normal/stage2/segment2 (6228 bytes @0xa570);loadaddress 0x0xb7c0
> entry 0x0x2000
>  normal/payload/segment0 (3514056 bytes, zeroes compressed to 1 bytes
> @0xbe20);loadaddress 0x0x1096a8 entry 0x0x10007c
>  normal/payload/segment1 (38568 bytes @0xbe80);loadaddress 0x0x100000
> entry 0x0x10007c
>  normal/payload/segment2 (72 bytes @0x15580);loadaddress 0x0x463570
> entry 0x0x10007c
>  blob/vsa (57504 bytes @0x15610);loadaddress 0x0 entry 0x0
>  bootblock (20480 bytes @0x7b000)
> Total size = 165534B 161KB (0x2869e)
>
> comparing to your image I don't have zerofill, does this matter?
>
> one more issue I've noticed: kernel boots fine and seems to work ok
> but I don't have serial console anymore.. :( do you have it working on
> your alix? what could be the problem?
>
>

zerofill is needed for speed but not correctness.

so you are saying a make in coreboot-v3 doesn't correctly set up the payload?

ron




More information about the coreboot mailing list