[coreboot] superiotool: add register definitions for W83627HF
Uwe Hermann
uwe at hermann-uwe.de
Sun Oct 19 23:06:19 CEST 2008
On Fri, Oct 17, 2008 at 06:26:52PM +0300, Andriy Gapon wrote:
> Add register definitions for W83627HF based on publicly available
> specification and local testing.
> Also tweak a little bit algorithm for (internal) device id calculation:
> chips from W83627HF/F/HG/G family have id of 0x52 and a multitude of
> revisions (0x1x, 0x3A, 0x41, maybe more), chips from W83627HF/GF family
> have the same device id but revisions 0xFx.
>
> Signed-off-by: Andriy Gapon <avg at icyb.net.ua>
Looks good, thanks! Committed in r3670.
In addition, I've added your name to the list of contributors in the
README, and I removed...
> Index: winbond.c
> ===================================================================
> --- winbond.c (revision 3667)
> +++ winbond.c (working copy)
> @@ -39,7 +39,46 @@
> /* ID and rev[3..0] */
> {0x527, "W83977CTF", { /* TODO: Not yet in sensors-detect */
> {EOT}}},
[...]
> + {0xa, "ACPI",
> + /* Note: Datasheet says 0xe2 can't be read/written. */
... this line. It seem to be copy-paste from some other Super I/O, the
datasheet for this one doesn't seem to say that 0xe2 cannot be read/written
anywhere (or at least I didn't find that place).
> + {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
> + 0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT},
> + {0x00,0x00,0x00,0x00,MISC,MISC,MISC,0x00,0x00,0x00,
> + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,RSVD,RSVD,EOT}},
Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
More information about the coreboot
mailing list