[coreboot] v3 HT

[Myles Watson]

Here's a list of the #defines that I think we should look at.  I would like
to detect as many as possible, and add the rest to the dts or Kconfig.

./libstage1.c:#if HT_CHAIN_UNITID_BASE != 0
./domain.c:#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
./coherent_ht.c:#ifndef TRY_HIGH_FIRST
./coherent_ht.c:#ifndef K8_HT_CHECK_PENDING_LINK
./coherent_ht.c:#ifndef ENABLE_APIC_EXT_ID
./coherent_ht.c:#ifdef CONFIG_K8_HT_FREQ_1G_SUPPORT
./coherent_ht.c:#if CONFIG_CROSS_BAR_47_56
./coherent_ht.c:#if (CONFIG_MAX_PHYSICAL_CPUS > 4) ||
(CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
./coherent_ht.c:#if CONFIG_USE_PRINTK_IN_CAR
./coherent_ht.c:#if CONFIG_LOGICAL_CPUS==1
./pci.c:#if SB_HT_CHAIN_ON_BUS0 > 0
./pci.c:#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
./pci.c:#ifdef CONFIG_MULTIPLE_VGA_INIT
./incoherent_ht.c:        #if (CONFIG_K8_SCAN_PCI_BUS == 1)
./incoherent_ht.c:#if CONFIG_K8_ALLOCATE_IO_RANGE == 1
./raminit.c:#if defined(CONFIG_LB_MEM_TOPK) & ((CONFIG_LB_MEM_TOPK -1) != 0)
./raminit.c:#ifdef QRANK_DIMM_SUPPORT
./raminit.c:#if CPU_SOCKET_TYPE == SOCKET_L1
./raminit.c:#if CPU_SOCKET_TYPE == SOCKET_AM2
./raminit.c:#ifdef DRAM_MIN_CYCLE_TIME
./raminit.c:#if DIMM_SUPPORT==0x0104   /* DDR2 and REG */
./raminit.c:#if MEM_TRAIN_SEQ ==  0
./dqs.c:    #if CONFIG_AP_CODE_IN_CAR == 0

This one would be nice to simplify to the point where it only occurs in one
place.
./domain.c:#ifdef CONFIG_PCI_64BIT_PREF_MEM

Thanks,
Myles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081028/dc56f683/attachment.html>