[coreboot] v3 HT

[Carl-Daniel Hailfinger]

On 28.10.2008 18:05, Myles Watson wrote:
> On Tue, Oct 28, 2008 at 10:36 AM, Marc Jones <Marc.Jones at amd.com> wrote:
>
>   
>> ron minnich wrote:
>>
>>     
>>> On Tue, Oct 28, 2008 at 8:03 AM, Myles Watson <mylesgw at gmail.com> wrote:
>>>
>>>       
>>>> Here's a list of the #defines that I think we should look at.  I would
>>>> like
>>>> to detect as many as possible, and add the rest to the dts or Kconfig.
>>>>
>>>>         
>>> ...
>>>       
>>> ./raminit.c:#if CPU_SOCKET_TYPE == SOCKET_L1
>>>       
>>>> ./raminit.c:#if CPU_SOCKET_TYPE == SOCKET_AM2
>>>>
>>>>         
>>> yes, these are trivial to detect at runtime.
>>>
>>>  ./raminit.c:#if DIMM_SUPPORT==0x0104   /* DDR2 and REG */
>>>       
>>> This ought to be determined somehow but not sure how.
>>>
>>>       
>> These two are related. The socket type defines the package and by extension
>> what type of dimms are supported. It is better to define the socket for the
>> platform than trying to detect it since it can't change.
>>     
>
>
> So it should be in the dts, right?  I think the more things we put in one
> place the easier later ports will be.
>   

Yes. The cpu block in the dts is still empty and could use some more info.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/