[coreboot] port superiotool to FreeBSD

[Carl-Daniel Hailfinger]

On 28.10.2008 16:56, Idwer Vollering wrote:
> 2008/10/28, Andriy Gapon <avg at icyb.net.ua>:
>   
>> allow superiotool to compile and work on FreeBSD
>> using the same approach as earlier flashrom port
>>
>> Signed-off-by: Andriy Gapon <avg at icyb.net.ua>
>>
>> ---
>>
>> This is tested on FreeBSD 7, dump for W83977EF/EG that I sent previously
>> was obtained using this patch.
>>
>> It seems that this approach can also be extended to all coreboot (and
>> utils) code that uses inX/outX (it is quite unfortunate that Linux and
>> BSD use different order of parameters for outX).
>>
>>
>> --
>>
>> Andriy Gapon
>>
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> http://www.coreboot.org/mailman/listinfo/coreboot
>>
>>
>>     
> Great ! However, you overlooked outb at lines 471 and 475 in ite.c, see my
> patch.
>
> Idwer
>
>   

With a signoff, you can take my
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>


Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/