[coreboot] r973 - coreboot-v3/mainboard/via/epia-cn
svn at coreboot.org
svn at coreboot.org
Fri Oct 31 19:57:37 CET 2008
Author: rminnich
Date: 2008-10-31 19:57:37 +0100 (Fri, 31 Oct 2008)
New Revision: 973
Added:
coreboot-v3/mainboard/via/epia-cn/cmos.layout
coreboot-v3/mainboard/via/epia-cn/dts
coreboot-v3/mainboard/via/epia-cn/initram.c
coreboot-v3/mainboard/via/epia-cn/mainboard.h
coreboot-v3/mainboard/via/epia-cn/stage1.c
Log:
new files
Signed-off-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Added: coreboot-v3/mainboard/via/epia-cn/cmos.layout
===================================================================
--- coreboot-v3/mainboard/via/epia-cn/cmos.layout (rev 0)
+++ coreboot-v3/mainboard/via/epia-cn/cmos.layout 2008-10-31 18:57:37 UTC (rev 973)
@@ -0,0 +1,131 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2007-2008 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+# TODO verify that these are correct for this part on the VIA
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+# -----------------------------------------------------------------
+# Status Register A
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+409 1 e 1 power_on_after_fail
+#410 6 r 0 unused
+
+# coreboot config options: bootloader
+416 512 s 0 boot_devices
+#928 80 r 0 unused
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 983 984
+
+
Added: coreboot-v3/mainboard/via/epia-cn/dts
===================================================================
--- coreboot-v3/mainboard/via/epia-cn/dts (rev 0)
+++ coreboot-v3/mainboard/via/epia-cn/dts 2008-10-31 18:57:37 UTC (rev 973)
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Corey Osgood <corey.osgood at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+-[0000:00]-+-00.0 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
+ +-00.1 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
+ +-00.2 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
+ +-00.3 VIA Technologies, Inc. PT890 Host Bridge
+ +-00.4 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
+ +-00.7 VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
+ +-01.0-[0000:01]----00.0 VIA Technologies, Inc. UniChrome Pro IGP
+ +-08.0 RaLink RT2561/RT61 802.11g PCI
+ +-0a.0 VIA Technologies, Inc. IEEE 1394 Host Controller
+ +-0f.0 VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
+ +-0f.1 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
+ +-10.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
+ +-10.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
+ +-10.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
+ +-10.3 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
+ +-10.4 VIA Technologies, Inc. USB 2.0
+ +-11.0 VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
+ +-11.5 VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller
+ \-12.0 VIA Technologies, Inc. VT6102 [Rhine-II]
+*/
+
+/{
+ mainboard_vendor = "VIA";
+ mainboard_name = "EPIA-CN";
+ mainboard_pci_subsystem_vendor = "0xdead"; /* TODO */
+ mainboard_pci_subsystem_device = "0xbeef"; /* TODO */
+ cpus { };
+ apic at 0 {
+ };
+ domain at 0 {
+ pci at 0,0 {};
+ pci at 0,1 {};
+ pci at 0,2 {};
+ pci at 0,3 {};
+ pci at 0,4 {};
+ pci at 0,7 {};
+ pci at 1,0 {};
+ pci at f,0 {};
+ pci at 10,0 {
+ /config/("southbridge/via/vt8237/sata.dts");
+ };
+ pci at 10,1 {
+ /config/("southbridge/via/vt8237/ide.dts");
+ };
+ pci at 11,0 {
+ /config/("southbridge/via/vt8237/lpc.dts");
+ };
+ ioport at 4e {
+/*
+ /config/("superio/via/vt1221/dts");
+ com1enable = "1";
+*/
+ };
+ };
+};
Added: coreboot-v3/mainboard/via/epia-cn/initram.c
===================================================================
--- coreboot-v3/mainboard/via/epia-cn/initram.c (rev 0)
+++ coreboot-v3/mainboard/via/epia-cn/initram.c 2008-10-31 18:57:37 UTC (rev 973)
@@ -0,0 +1,213 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Corey Osgood <corey.osgood at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define _MAINOBJECT
+
+#include <types.h>
+#include <lib.h>
+#include <console.h>
+#include <io.h>
+#include <spd.h>
+#include <via_c7.h>
+#include <arch/x86/pci_ops.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <superio/via/vt1211/vt1211.h>
+#include <southbridge/via/vt8237/vt8237.h>
+#include <northbridge/via/cn700/cn700.h>
+
+#define SMBUS_IO_BASE 0x0400
+
+u8 spd_read_byte(u16 dev, u8 addr)
+{
+ return smbus_read_byte(dev, addr, SMBUS_IO_BASE);
+}
+
+void find_smbus_devices(u8 min, u8 max)
+{
+ u8 dev;
+ u8 result;
+ for(dev = min; dev < max; dev++)
+ {
+ result = spd_read_byte(dev, SPD_MEMORY_TYPE);
+ switch(result)
+ {
+ case SPD_MEMORY_TYPE_SDRAM: printk(BIOS_DEBUG,
+ "Possible SDRAM spd at address 0x%2x\n", dev);
+ break;
+ case SPD_MEMORY_TYPE_SDRAM_DDR: printk(BIOS_DEBUG,
+ "Possible DDR SDRAM spd at address 0x%2x\n", dev);
+ break;
+ case SPD_MEMORY_TYPE_SDRAM_DDR2: printk(BIOS_DEBUG,
+ "Possible DDR2 SDRAM spd at address 0x%2x\n", dev);
+ break;
+ };
+ }
+}
+
+
+void dump_smbus_registers(void)
+{
+ int device;
+ for(device = 1; device < (int)0x80; device++) {
+ int j;
+ //if(spd_read_byte(device, 0) < 0 )
+ // continue;
+ printk(BIOS_DEBUG, "smbus: %02x", device);
+ for(j = 0; j < 256; j++) {
+ int status;
+ u8 byte;
+ status = spd_read_byte(device, j);
+ if (status < 0) {
+ break;
+ }
+ if ((j & 0xf) == 0) {
+ printk(BIOS_DEBUG, "\n%02x: ",j);
+ }
+ byte = status & 0xff;
+ printk(BIOS_DEBUG, "%02x ", byte);
+ }
+ printk(BIOS_DEBUG, "\n");
+ }
+}
+
+static void enable_mainboard_devices(void)
+{
+ u32 dev;
+
+ pci_conf1_find_device(0x1106, 0x3227, &dev);
+ /* Disable GP3 */
+ pci_conf1_write_config8(dev, 0x98, 0x00);
+
+ pci_conf1_write_config8(dev, 0x50, 0x88);//disable mc97, sata
+ pci_conf1_write_config8(dev, 0x51, 0x1f);
+ pci_conf1_write_config8(dev, 0x58, 0x60);
+ pci_conf1_write_config8(dev, 0x59, 0x80);
+ pci_conf1_write_config8(dev, 0x5b, 0x08);
+
+ pci_conf1_find_device(0x1106, 0x0571, &dev);
+
+ /* Make it respond to IO space */
+ pci_conf1_write_config8(dev, 0x04, 0x07);
+
+ /* Compatibility mode addresses */
+ //pci_conf1_write_config32(dev, 0x10, 0);
+ //pci_conf1_write_config32(dev, 0x14, 0);
+ //pci_conf1_write_config32(dev, 0x18, 0);
+ //pci_conf1_write_config32(dev, 0x1b, 0);
+
+ /* Native mode base address */
+ //pci_conf1_write_config32(dev, 0x20, BUS_MASTER_ADDR | 1);
+
+ pci_conf1_write_config8(dev, 0x40, 0x4b);//was 0x3
+ pci_conf1_write_config8(dev, 0x41, 0xf2);
+ pci_conf1_write_config8(dev, 0x42, 0x09);
+ /* I'll be damned if I know what these do */
+ pci_conf1_write_config8(dev, 0x3c, 0xff);//was 0x0e
+ pci_conf1_write_config8(dev, 0x3d, 0x00);//was 0x00
+}
+
+static void enable_shadow_ram(void)
+{
+ u8 shadowreg;
+
+ printk(BIOS_DEBUG, "Enabling shadow ram\n");
+ /* Enable shadow ram as normal dram */
+ /* 0xc0000-0xcffff */
+ pci_conf1_write_config8(PCI_BDF(0, 0, 3), 0x80, 0xff);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x61, 0xff);
+ /* 0xd0000-0xdffff */
+ pci_conf1_write_config8(PCI_BDF(0, 0, 3), 0x81, 0xff);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x62, 0xff);
+ /* 0xe0000-0xeffff */
+ pci_conf1_write_config8(PCI_BDF(0, 0, 3), 0x82, 0xff);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x64, 0xff);
+
+ /* 0xf0000-0xfffff */
+ shadowreg = pci_conf1_read_config8(PCI_BDF(0, 0, 3), 0x83);
+ shadowreg |= 0x30;
+ pci_conf1_write_config8(PCI_BDF(0, 0, 3), 0x83, shadowreg);
+
+ /* Do it again for the vlink controller */
+ shadowreg = pci_conf1_read_config8(PCI_BDF(0, 0, 7), 0x63);
+ shadowreg |= 0x30;
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x63, shadowreg);
+}
+
+static void enable_vlink(void)
+{
+ printk(BIOS_DEBUG, "Enabling Via V-Link\n");
+
+ /* Enable V-Link statically in 8x mode, using Jetway default values */
+//40: 14 19 88 80 82 44 00 04 13 b9 88 80 82 44 00 01
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x42, 0x88);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x45, 0x44);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x46, 0x00);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x47, 0x04);
+ //pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x48, 0x13);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x4b, 0x80);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x4c, 0x82);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x4d, 0x44);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x4e, 0x00);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x4f, 0x01);
+//b0: 05 01 00 83 35 66 66 64 45 98 77 11 00 00 00 00
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb4, 0x35);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb5, 0x66);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb6, 0x66);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb7, 0x64);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb8, 0x45);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xb9, 0x98);
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0xba, 0x77);
+
+ /* This has to be done last, I think */
+ pci_conf1_write_config8(PCI_BDF(0, 0, 7), 0x48, 0x13);
+}
+
+int main(void)
+{
+ struct board_info ctrl[] = {
+ {
+ .d0f2 = PCI_BDF(0, 0, 2),
+ .d0f3 = PCI_BDF(0, 0, 3),
+ .d0f4 = PCI_BDF(0, 0, 4),
+ .d0f7 = PCI_BDF(0, 0, 7),
+ .d1f0 = PCI_BDF(0, 1, 0),
+ .spd_channel0 = {0x50},
+ },
+ };
+
+ printk(BIOS_DEBUG, "In initram.c main()\n");
+
+ enable_vlink();
+ enable_mainboard_devices();
+ enable_shadow_ram();
+
+ c7_cpu_setup(PCI_BDF(0, 0, 2));
+
+ enable_smbus(SMBUS_IO_BASE);
+ //find_smbus_devices(0x00, 0xff);
+ sdram_set_registers(ctrl);
+ sdram_set_spd_registers(ctrl);
+ ddr2_sdram_enable(ctrl);
+
+ //ram_check(0, 640*1024);
+ //ram_check((8 * 1024 * 1024), (16 * 1024 * 1024));
+
+ return 0;
+}
Added: coreboot-v3/mainboard/via/epia-cn/mainboard.h
===================================================================
--- coreboot-v3/mainboard/via/epia-cn/mainboard.h (rev 0)
+++ coreboot-v3/mainboard/via/epia-cn/mainboard.h 2008-10-31 18:57:37 UTC (rev 973)
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Corey Osgood <corey.osgood at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
Added: coreboot-v3/mainboard/via/epia-cn/stage1.c
===================================================================
--- coreboot-v3/mainboard/via/epia-cn/stage1.c (rev 0)
+++ coreboot-v3/mainboard/via/epia-cn/stage1.c 2008-10-31 18:57:37 UTC (rev 973)
@@ -0,0 +1,58 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Ronald G. Minnich <rminnich at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <lib.h>
+#include <console.h>
+#include <io.h>
+#include <arch/x86/pci_ops.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <superio/fintek/f71805f/f71805f.h>
+#include <northbridge/via/cn700/cn700.h>
+
+/* Someday, we're all going multicore. */
+void stop_ap(void)
+{
+}
+
+void hardware_stage1(void)
+{
+ void vt1211_enable_serial(u8 dev, u8 serial, u16 iobase);
+ u32 dev;
+
+ post_code(POST_START_OF_MAIN);
+ vt1211_enable_serial(0x2e, 2, 0x3f8);
+
+ /* Enable multifunction for northbridge. */
+ pci_conf1_write_config8(0x00, 0x4f, 0x01);
+
+ printk(BIOS_SPEW, "In hardware_stage1()\n");
+ /* Disabled GP3, to keep the system from rebooting automatically */
+ //pci_conf1_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VT8237R_LPC, &dev);
+ dev = PCI_BDF(0, 17, 0);
+ pci_conf1_write_config8(dev, 0x98, 0x00);
+}
+
+void mainboard_pre_payload(void)
+{
+ //banner(BIOS_DEBUG, "mainboard_pre_payload: done");
+}
More information about the coreboot
mailing list