[coreboot] Problems porting H8dmr_fam10 to H8qme-2+

Myles Watson mylesgw at gmail.com
Thu Dec 17 18:02:03 CET 2009

On Thu, Dec 17, 2009 at 7:03 AM, Knut Kujat <knuku at gap.upv.es> wrote:

> Hi,
> I did some small changes in Config.lb and Options.lb and then I compiled
> the H8dmr_fam10 board to flash it in a H8qme-2+ board. And of course the
> booting fails :(:
> (split)40K table at =dfff0000
> 0: mmio_basek=00380000, basek=00400000, limitk=00000000
> 1: mmio_basek=00380000, basek=00480000, limitk=00000000
> PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 ?
> VGA: PCI: 00:18.0 (aka node 0) link 2 has VGA device
> and here it stucks and doesn't continues.
I'm not sure what the problem is, but your IO resources aren't getting set
properly.  Could you apply this patch and send the output?

I'm wondering if there's an error in the constraint code, a memory
corruption problem, or an invalid resource declared.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/8e717f89/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: constraint_debug.diff
Type: text/x-patch
Size: 815 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/8e717f89/attachment.diff>

More information about the coreboot mailing list