[coreboot] Problems porting H8dmr_fam10 to H8qme-2+
Knut Kujat
knuku at gap.upv.es
Thu Dec 17 18:27:48 CET 2009
Myles Watson escribió:
>
>
> On Thu, Dec 17, 2009 at 7:03 AM, Knut Kujat <knuku at gap.upv.es
> <mailto:knuku at gap.upv.es>> wrote:
>
> Hi,
>
> I did some small changes in Config.lb and Options.lb and then I
> compiled
> the H8dmr_fam10 board to flash it in a H8qme-2+ board. And of
> course the
> booting fails :(:
>
> (split)40K table at =dfff0000
> 0: mmio_basek=00380000, basek=00400000, limitk=00000000
> 1: mmio_basek=00380000, basek=00480000, limitk=00000000
> PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 ?
> VGA: PCI: 00:18.0 (aka node 0) link 2 has VGA device
>
> and here it stucks and doesn't continues.
>
> I'm not sure what the problem is, but your IO resources aren't getting
> set properly. Could you apply this patch and send the output?
Yes, of course. Please find the new coreboot.log attached.
>
> I'm wondering if there's an error in the constraint code, a memory
> corruption problem, or an invalid resource declared.
>
> Thanks,
> Myles
>
As you can see I added some more printks and it got stuck in
"set_io_addr_reg" for the first node??
Another thing very strange is that at "stage: loading
fallback/coreboot_ram @ 0x200000 (1048576 bytes), entry @ 0x200000" it
halts for about 2 minutes, a long time to load 1048576 bytes isn't it?
Thanks for all your help!
Knut Kujat.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Coreboot.log
Type: text/x-log
Size: 110632 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/ee9d8cda/attachment.log>
More information about the coreboot
mailing list