[coreboot] flashrom: Can't mmap memory

ron minnich rminnich at gmail.com
Sun Feb 8 21:34:18 CET 2009

On Sun, Feb 8, 2009 at 10:03 AM, Peter Stuge <peter at stuge.se> wrote:
> ron minnich wrote:
>> I doubt the flash chips themselves know or care.
> They do. Look at how any LPC/FWH chip does block erase. Which block
> to erase depends on the address relative start of chip that is used
> in the block erase command.

relative to the start of the chip yes. But the chip itself could be
physically addressed at, e.g., 0x8000000, and all the programming
would be fine.

The only issue I've had with physical chip address was on the sc520,
where the put a bunch of registers in the middle of the flash address



More information about the coreboot mailing list