[coreboot] ASUS M2N-SLI Deluxe
spooky85 at gmail.com
Fri Jan 2 19:51:04 CET 2009
a little summary from my side:
i've tried the patch from uwe  but there are some issues with the
baud rate and also the same problem as fred  had but with a
the baud problem could be solved with a small workaround: just change
to 57600 in minicom but leave 115200 in the bios source.
uwe wrote then a second patch (see attachment, works with the lastest
svn rev. (remove the old patch before apply the new one)) which fixed
the baud problem and other stuff but not the "poweroff" problem.
my first boot log was:
coreboot-220.127.116.11Fallback Fr 2. Jan 17:10:59 CET 2009 starting...
*sysinfo range: [000cf000,000cf730)
Enabling routing table for node 00 done.
Enabling UP settings
started ap apicid: 01
begin msr fid, vid 3107121207110202
Current fid_cur: 0x2, fid_max: 0x11
Requested fid_new: 0x11
FidVid table step fidvid: 0xe
200MHZ step fidvid: 0x10
100MHZ step fidvid: 0x11
end msr fid, vid 3107120707110211
pos=0x8a, unfiltered freq_cap=0x8075
pos=0x8a, filtered freq_cap=0x75
pos=0x52, unfiltered freq_cap=0x807f
pos=0x52, filtered freq_cap=0x7f
dev1 old_freq=0x0, freq=0x6, needs_reset=0x1
dev2 old_freq=0x0, freq=0x6, needs_reset=0x1
dev1 input ln_width1=0x4, ln_width2=0x4
dev1 input width=0x1
dev1 output ln_width1=0x4, ln_width2=0x4
dev1 input|output width=0x11
old dev1 input|output width=0x11
dev2 input|output width=0x11
old dev2 input|output width=0x11
after ht_optimize_link for link pair 0, reset_needed=0x1
after optimize_link_read_pointers_chain, reset_needed=0x1
uwe told me to remove all useless hardware during these tests but no difference.
i hope that somebody find a solution to get a working bios for this board.
thats all for now.. i'll keep you up2date if something happens.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 9520 bytes
Desc: not available
More information about the coreboot