[coreboot] r1094 - in coreboot-v3: device include/device mainboard/amd/serengeti northbridge/amd/k8
svn at coreboot.org
svn at coreboot.org
Mon Jan 5 17:00:32 CET 2009
Author: myles
Date: 2009-01-05 17:00:32 +0100 (Mon, 05 Jan 2009)
New Revision: 1094
Modified:
coreboot-v3/device/hypertransport.c
coreboot-v3/include/device/hypertransport.h
coreboot-v3/mainboard/amd/serengeti/stage1.c
coreboot-v3/northbridge/amd/k8/domain.c
coreboot-v3/northbridge/amd/k8/pci
coreboot-v3/northbridge/amd/k8/pci.c
Log:
This patch fixes up k8 for the new resource allocator. It splits
northbridge functions and makes devices children of the northbridge.
northbridge/amd/k8/domain.c:
Add the functions from k8/pci.c that belong to the domain. Add
support for physical link numbers in resource indices. Combine find_iopair
and find_mempair to find_regpair.
northbridge/amd/k8/pci.c:
Remove functions that went to the domain.
device/hypertransport.c:
Add support for HT connections from devices that aren't the bus
controller.
device/hypertransport.h:
Change the prototype of hypertransport_scan_chain.
northbridge/amd/k8/pci:
Take out bridge flag.
mainboard/amd/serengeti/stage1.c
Change first register usage.
Signed-off-by: Myles Watson <mylesgw at gmail.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Modified: coreboot-v3/device/hypertransport.c
===================================================================
--- coreboot-v3/device/hypertransport.c 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/device/hypertransport.c 2009-01-05 16:00:32 UTC (rev 1094)
@@ -287,15 +287,15 @@
return pos;
}
-static void ht_collapse_early_enumeration(struct bus *bus,
+static void ht_collapse_early_enumeration(struct bus *bus, struct device* htdev,
unsigned int offset_unitid)
{
unsigned int devfn, ctrl;
struct ht_link prev;
/* Initialize the hypertransport enumeration state. */
- prev.dev = bus->dev;
- prev.pos = bus->cap;
+ prev.dev = htdev;
+ prev.pos = htdev->link[0].cap;
prev.ctrl_off = PCI_HT_CAP_HOST_CTRL;
prev.config_off = PCI_HT_CAP_HOST_WIDTH;
prev.freq_off = PCI_HT_CAP_HOST_FREQ;
@@ -384,7 +384,8 @@
}
}
-unsigned int hypertransport_scan_chain(struct bus *bus, unsigned int min_devfn,
+unsigned int hypertransport_scan_chain(struct device* htdev, struct bus *bus,
+ unsigned int min_devfn,
unsigned int max_devfn,
unsigned int max,
unsigned int *ht_unitid_base,
@@ -411,15 +412,15 @@
#endif
/* Restore the hypertransport chain to its unitialized state. */
- ht_collapse_early_enumeration(bus, offset_unitid);
+ ht_collapse_early_enumeration(bus, htdev, offset_unitid);
/* See which static device nodes I have. */
old_devices = bus->children;
- bus->children = 0;
+ bus->children = NULL;
/* Initialize the hypertransport enumeration state. */
- prev.dev = bus->dev;
- prev.pos = bus->cap;
+ prev.dev = htdev;
+ prev.pos = htdev->link[0].cap;
prev.ctrl_off = PCI_HT_CAP_HOST_CTRL;
prev.config_off = PCI_HT_CAP_HOST_WIDTH;
prev.freq_off = PCI_HT_CAP_HOST_FREQ;
@@ -525,7 +526,7 @@
next_unitid += count;
/* Setup the hypertransport link. */
- bus->reset_needed |= ht_setup_link(&prev, dev, pos);
+ htdev->link[0].reset_needed |= ht_setup_link(&prev, dev, pos);
printk(BIOS_DEBUG, "%s [%04x/%04x] %s next_unitid: %04x\n",
dev_path(dev),
@@ -537,7 +538,7 @@
&& (next_unitid <= (max_devfn >> 3)));
end_of_chain:
#if OPT_HT_LINK == 1
- if (bus->reset_needed) {
+ if (htdev->link[0].reset_needed) {
printk(BIOS_INFO, "HyperT reset needed\n");
} else {
printk(BIOS_DEBUG, "HyperT reset not needed\n");
@@ -621,8 +622,9 @@
{
unsigned int ht_unitid_base[4];
unsigned int offset_unitid = 1;
- return hypertransport_scan_chain(bus, min_devfn, max_devfn, max,
- ht_unitid_base, offset_unitid);
+ return hypertransport_scan_chain(bus->dev, bus, min_devfn,
+ max_devfn, max, ht_unitid_base,
+ offset_unitid);
}
unsigned int ht_scan_bridge(struct device *dev, unsigned int max)
Modified: coreboot-v3/include/device/hypertransport.h
===================================================================
--- coreboot-v3/include/device/hypertransport.h 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/include/device/hypertransport.h 2009-01-05 16:00:32 UTC (rev 1094)
@@ -21,8 +21,10 @@
#include <device/device.h>
#include <device/hypertransport_def.h>
-unsigned int hypertransport_scan_chain(struct bus *bus,
- unsigned min_devfn, unsigned max_devfn, unsigned int max, unsigned *ht_unit_base, unsigned offset_unitid);
+unsigned int hypertransport_scan_chain(struct device* parent, struct bus *bus,
+ unsigned min_devfn, unsigned max_devfn,
+ unsigned int max, unsigned *ht_unit_base,
+ unsigned offset_unitid);
unsigned int ht_scan_bridge(struct device *dev, unsigned int max);
extern const struct device_operations default_ht_ops_bus;
Modified: coreboot-v3/mainboard/amd/serengeti/stage1.c
===================================================================
--- coreboot-v3/mainboard/amd/serengeti/stage1.c 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/mainboard/amd/serengeti/stage1.c 2009-01-05 16:00:32 UTC (rev 1094)
@@ -210,10 +210,10 @@
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
- PCM(0, 0x18, 1, 0xC4, 0xFE000FC8, 0x01fff000),
+ PCM(0, 0x18, 1, 0xC4, 0xFE000FC8, 0x00000000),
PCM(0, 0x18, 1, 0xCC, 0xFE000FC8, 0x00000000),
PCM(0, 0x18, 1, 0xD4, 0xFE000FC8, 0x00000000),
- PCM(0, 0x18, 1, 0xDC, 0xFE000FC8, 0x00000000),
+ PCM(0, 0x18, 1, 0xDC, 0xFE000FC8, 0x01fff000),
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
@@ -240,10 +240,10 @@
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
- PCM(0, 0x18, 1, 0xC0, 0xFE000FCC, 0x00000003),
+ PCM(0, 0x18, 1, 0xC0, 0xFE000FCC, 0x00000000),
PCM(0, 0x18, 1, 0xC8, 0xFE000FCC, 0x00000000),
PCM(0, 0x18, 1, 0xD0, 0xFE000FCC, 0x00000000),
- PCM(0, 0x18, 1, 0xD8, 0xFE000FCC, 0x00000000),
+ PCM(0, 0x18, 1, 0xD8, 0xFE000FCC, 0x00000003),
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
Modified: coreboot-v3/northbridge/amd/k8/domain.c
===================================================================
--- coreboot-v3/northbridge/amd/k8/domain.c 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/northbridge/amd/k8/domain.c 2009-01-05 16:00:32 UTC (rev 1094)
@@ -7,6 +7,7 @@
* Copyright (C) 2005 Ollie Lo
* Copyright (C) 2005-2007 Stefan Reinauer <stepan at openbios.org>
* Copyright (C) 2008 Ronald G. Minnich <rminnich at gmail.com>
+ * Copyright (C) 2008-2009 Myles Watson <mylesgw at gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -46,27 +47,18 @@
#include <lib.h>
#include <lapic.h>
+#define K8_RESOURCE_INDEX(node, func, link, reg) (((node) << 16) | ((func<<8) | (reg) | (link)))
+#define K8_RESOURCE_NODE(index) (((index) & 0x70000)>>16)
+#define K8_RESOURCE_REG(index) ((index) & 0xfc)
+#define K8_RESOURCE_LINK(index) ((index) & 0x3)
+#define K8_RESOURCE_FUNC(index) (((index) & 0x700)>>8)
+
#define FX_DEVS 8
extern struct device * __f0_dev[FX_DEVS];
u32 f1_read_config32(unsigned int reg);
void f1_write_config32(unsigned int reg, u32 value);
unsigned int amdk8_nodeid(struct device * dev);
-static void k8_ram_resource(struct device * dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
-{
- struct resource *resource;
-
- if (!sizek) {
- return;
- }
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-}
-
static void tolm_test(void *gp, struct device *dev, struct resource *new)
{
struct resource **best_p = gp;
@@ -91,68 +83,306 @@
return tolm;
}
-static void k8_pci_domain_read_resources(struct device * dev)
+/**
+ * reg_useable
+ * @param reg register to check
+ * @param goal_dev device to own the resource
+ * @param goal_nodeid node number
+ * @param goal_link link number
+ * @return 0 if not useable, 1 if useable, or 2 if the pair is free
+ */
+static int reg_useable(unsigned reg, struct device *dev, unsigned goal_nodeid,
+ unsigned goal_link)
{
+ struct resource *res = NULL;
+ unsigned nodeid = 0, link = 0;
+ int result;
+
+ /* Look for the resource that matches this register. */
+ for(nodeid = 0; !res && (nodeid < FX_DEVS); nodeid++) {
+ for (link = 0; !res && (link < 3); link++) {
+ res = probe_resource(dev,K8_RESOURCE_INDEX(nodeid,1,link,reg));
+ }
+ }
+
+ if (res) {
+ /* If the resource is allocated to the link and node already. */
+ if (0 && (goal_link == K8_RESOURCE_LINK(res->index)) &&
+ (goal_nodeid == K8_RESOURCE_NODE(res->index)) &&
+ (res->flags <= 1)) {
+ printk(BIOS_DEBUG, "Re-allocated resource %lx!\n",
+ res->index);
+ result = 1;
+ }
+ /* Allocated, but not to this node. */
+ else
+ result = 0;
+ } else
+ /* If no allocated resource was found, it is free - return 2. */
+ result = 2;
+
+ return result;
+}
+
+static struct resource *amdk8_find_regpair(struct device *dev, unsigned nodeid,
+ unsigned minreg, unsigned maxreg,
+ unsigned link)
+{
struct resource *resource;
- unsigned reg;
+ unsigned free_reg, reg;
+ resource = NULL;
+ free_reg = 0;
+ for (reg = minreg; reg <= maxreg; reg += 0x8) {
+ int result;
+ result = reg_useable(reg, dev, nodeid, link);
+ if (result == 1) {
+ /* I have been allocated this one */
+ break;
+ } else if (result > 1) {
+ /* I have a free register pair */
+ free_reg = reg;
+ }
+ }
+ if (reg > maxreg) {
+ reg = free_reg;
+ }
+ if (reg > 0) {
+ resource = new_resource(dev, 0x100 + (reg | link));
+ }
+ return resource;
+}
- /* Find the already assigned resource pairs */
- printk(BIOS_DEBUG, "k8_pci_domain_read_resources\n");
- for(reg = 0x80; reg <= 0xd8; reg+= 0x08) {
+static struct resource *amdk8_find_iopair(struct device *dev, unsigned nodeid,
+ unsigned link)
+{
+ return amdk8_find_regpair(dev,nodeid,0xc0, 0xd8,link);
+}
+
+static struct resource *amdk8_find_mempair(struct device *dev, unsigned nodeid,
+ unsigned link)
+{
+ return amdk8_find_regpair(dev,nodeid,0x80, 0xb8,link);
+}
+
+static void amdk8_link_read_bases(struct device *dev, unsigned nodeid,
+ unsigned link)
+{
+ struct resource *resource;
+
+ /* Initialize the io space constraints on the current bus */
+ resource = amdk8_find_iopair(dev, nodeid, link);
+ if (resource) {
+ resource->base = 0;
+ resource->size = 0;
+ resource->align = log2c(HT_IO_HOST_ALIGN);
+ resource->gran = log2c(HT_IO_HOST_ALIGN);
+ resource->limit = 0xffffUL;
+ resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE;
+ }
+
+ /* Initialize the prefetchable memory constraints on the current bus */
+ resource = amdk8_find_mempair(dev, nodeid, link);
+ if (resource) {
+ resource->base = 0;
+ resource->size = 0;
+ resource->align = log2c(HT_MEM_HOST_ALIGN);
+ resource->gran = log2c(HT_MEM_HOST_ALIGN);
+ resource->limit = 0xffffffffffULL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+#ifdef CONFIG_PCI_64BIT_PREF_MEM
+ resource->flags |= IORESOURCE_BRIDGE;
+#endif
+ }
+
+ /* Initialize the memory constraints on the current bus */
+ resource = amdk8_find_mempair(dev, nodeid, link);
+ if (resource) {
+ resource->base = 0;
+ resource->size = 0;
+ resource->align = log2c(HT_MEM_HOST_ALIGN);
+ resource->gran = log2c(HT_MEM_HOST_ALIGN);
+ resource->limit = 0xffffffffULL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE;
+ }
+}
+
+static void k8_pci_domain_read_resources(struct device *dev)
+{
+ printk(BIOS_DEBUG, "%s\n", __func__);
+ unsigned link;
+
+ for (link = 0; link < dev->links; link++) {
+ if (dev->link[link].children) {
+ amdk8_link_read_bases(dev, 0, link);
+ }
+ }
+ printk(BIOS_DEBUG, "%s done\n", __func__);
+}
+
+static void amdk8_set_resource(struct device *dev, struct resource *resource)
+{
+ resource_t rbase, rend;
+ unsigned reg, link, nodeid, func;
+ char buf[50];
+
+ printk(BIOS_DEBUG, "%s: %s@%lx flags %lx\n", __func__, dev->dtsname,
+ resource->index, resource->flags);
+
+ /* Make certain the resource has actually been set. */
+ if (!(resource->flags & IORESOURCE_ASSIGNED)) {
+ return;
+ }
+
+ /* If I have already stored this resource don't worry about it. */
+ if (resource->flags & IORESOURCE_STORED) {
+ return;
+ }
+
+ /* Only handle PCI memory and IO resources. */
+ if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
+ return;
+
+ /* Get the base address. */
+ rbase = resource->base;
+
+ /* Get the limit (rounded up). */
+ rend = resource_end(resource);
+
+ /* Get the register, nodeid, and link */
+ nodeid = K8_RESOURCE_NODE(resource->index);
+ reg = K8_RESOURCE_REG(resource->index);
+ link = K8_RESOURCE_LINK(resource->index);
+ func = K8_RESOURCE_FUNC(resource->index);
+
+ if (func != 1) {
+ printk(BIOS_INFO, "%s: K8 function %d register!\n", __func__,
+ func);
+ return;
+ }
+
+ if (resource->flags & IORESOURCE_IO) {
u32 base, limit;
- base = f1_read_config32(reg);
- limit = f1_read_config32(reg + 0x04);
- /* Is this register allocated? */
- if ((base & 3) != 0) {
- unsigned nodeid, link;
- struct device * dev;
- nodeid = limit & 7;
- link = (limit >> 4) & 3;
- dev = __f0_dev[nodeid]; /* Initialized by f1_read_config32. */
- if (dev) {
- /* Reserve the resource */
- struct resource *resource;
- resource = new_resource(dev, 0x100 + (reg | link));
- if (resource) {
- resource->flags = 1;
- }
- }
+ base = f1_read_config32(reg);
+ limit = f1_read_config32(reg + 0x4);
+ base &= 0xfe000fcc;
+ base |= rbase & 0x01fff000;
+ base |= 3;
+ limit &= 0xfe000fc8;
+ limit |= rend & 0x01fff000;
+ limit |= (link & 3) << 4;
+ limit |= (nodeid & 7);
+
+ if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
+ printk(BIOS_SPEW,
+ "%s, enabling legacy VGA IO forwarding for %s link %x\n",
+ __func__, dev_path(dev), link);
+ base |= PCI_IO_BASE_VGA_EN;
}
+ if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) {
+ base |= PCI_IO_BASE_NO_ISA;
+ }
+
+ f1_write_config32(reg + 0x4, limit);
+ f1_write_config32(reg, base);
+ } else if (resource->flags & IORESOURCE_MEM) {
+ u32 base, limit;
+ base = f1_read_config32(reg);
+ limit = f1_read_config32(reg + 0x4);
+ base &= 0x000000f0;
+ base |= (rbase >> 8) & 0xffffff00;
+ base |= 3;
+ limit &= 0x00000048;
+ limit |= (rend >> 8) & 0xffffff00;
+ limit |= (link & 3) << 4;
+ limit |= (nodeid & 7);
+ f1_write_config32(reg + 0x4, limit);
+ f1_write_config32(reg, base);
}
-#ifndef CONFIG_PCI_64BIT_PREF_MEM
- /* Initialize the system-wide io space constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
- resource->base = 0x400;
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+ resource->flags |= IORESOURCE_STORED;
+ sprintf(buf, " <node %d link %d>", nodeid, link);
+ report_resource_stored(dev, resource, buf);
+}
- /* Initialize the system-wide memory resource constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-#else
- /* Initialize the system-wide io space constraints */
- resource = new_resource(dev, 0);
- resource->base = 0x400;
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO;
+#ifdef CONFIG_MULTIPLE_VGA_INIT
+extern struct device *vga_pri; // the primary vga device, defined in device.c
+#endif
- /* Initialize the system-wide prefetchable memory resource constraints */
- resource = new_resource(dev, 1);
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+static void amdk8_create_vga_resource(struct device *dev)
+{
+ struct resource *resource;
+ unsigned link;
- /* Initialize the system-wide memory resource constraints */
- resource = new_resource(dev, 2);
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM;
+ /* find out which link the VGA card is connected,
+ * we only deal with the 'first' vga card */
+ for (link = 0; link < dev->links; link++) {
+ if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
+#ifdef CONFIG_MULTIPLE_VGA_INIT
+ printk(BIOS_DEBUG,
+ "VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n",
+ vga_pri->bus->secondary,
+ dev->link[link].secondary,
+ dev->link[link].subordinate);
+ /* We need to make sure the vga_pri is under the link */
+ if ((vga_pri->bus->secondary >=
+ dev->link[link].secondary)
+ && (vga_pri->bus->secondary <=
+ dev->link[link].subordinate)
+ )
#endif
- printk(BIOS_DEBUG, "k8_pci_domain_read_resources done\n");
+ break;
+ }
+ }
+
+ /* no VGA card installed */
+ if (link == dev->links)
+ return;
+
+ printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n",
+ dev_path(dev), 0, link);
+
+ /* Allocate a resrouce for the legacy VGA buffer. */
+ resource = amdk8_find_mempair(dev, 0, link);
+ if (!resource) {
+ printk(BIOS_DEBUG,
+ "VGA: Can not find free mmio reg for legacy VGA buffer\n");
+ return;
+ }
+ resource->base = 0xa0000;
+ resource->size = 0x20000;
+
+ resource->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED;
}
+static void amdk8_set_resources(struct device *dev)
+{
+ unsigned link;
+ int i;
+
+ printk(BIOS_DEBUG, "%s\n", __func__);
+
+ printk(BIOS_DEBUG, "%s ops %p ops_pci_bus %p\n",
+ dev->dtsname, dev->ops, dev->ops->ops_pci_bus);
+ pci_check_pci_ops(dev->ops->ops_pci_bus);
+
+ amdk8_create_vga_resource(dev);
+
+ /* Set each resource we have found */
+ for (i = 0; i < dev->resources; i++) {
+ amdk8_set_resource(dev, &dev->resource[i]);
+ }
+
+ for (link = 0; link < dev->links; link++) {
+ struct bus *bus;
+ bus = &dev->link[link];
+ if (bus->children) {
+ phase4_set_resources(bus);
+ }
+ }
+}
+
static void k8_pci_domain_set_resources(struct device * dev)
{
- printk(BIOS_DEBUG, "k8_pci_domain_set_resources\n");
+ printk(BIOS_DEBUG, "%s\n", __func__);
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info get_hw_mem_hole_info(void);
void disable_hoist_memory(unsigned long hole_startk, int i);
@@ -170,69 +400,6 @@
unsigned reset_memhole = 1;
#endif
-#if 0
- /* Place the IO devices somewhere safe */
- io = find_resource(dev, 0);
- io->base = DEVICE_IO_START;
-#endif
-#ifdef CONFIG_PCI_64BIT_PREF_MEM
- /* Now reallocate the pci resources memory with the
- * highest addresses I can manage.
- */
- mem1 = find_resource(dev, 1);
- mem2 = find_resource(dev, 2);
-
-#if 1
- printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
-#endif
-
- /* See if both resources have roughly the same limits */
- if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) ||
- ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff)))
- {
- /* If so place the one with the most stringent alignment first
- */
- if (mem2->align > mem1->align) {
- struct resource *tmp;
- tmp = mem1;
- mem1 = mem2;
- mem2 = tmp;
- }
- /* Now place the memory as high up as it will go */
- mem2->base = resource_max(mem2);
- mem1->limit = mem2->base - 1;
- mem1->base = resource_max(mem1);
- }
- else {
- /* Place the resources as high up as they will go */
- mem2->base = resource_max(mem2);
- mem1->base = resource_max(mem1);
- }
-
-#if 1
- printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
-#endif
-
- last = &dev->resource[dev->resources];
- for(resource = &dev->resource[0]; resource < last; resource++)
- {
-#if 1
- resource->flags |= IORESOURCE_ASSIGNED;
- resource->flags &= ~IORESOURCE_STORED;
-#endif
- resource->flags |= IORESOURCE_STORED;
- report_resource_stored(dev, resource, "");
-
- }
-#endif
-
-
pci_tolm = find_pci_tolm(&dev->link[0]);
#warning "FIXME handle interleaved nodes"
@@ -240,11 +407,9 @@
/* Round mmio_basek to something the processor can support */
mmio_basek &= ~((1 << 6) -1);
-#if 1
#warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole"
/* Round the mmio hole to 64M */
mmio_basek &= ~((64*1024) - 1);
-#endif
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
/* If the hw mem hole is already set in raminit stage, here we will
@@ -307,7 +472,7 @@
/* see if we need a hole from 0xa0000 to 0xbffff */
if ((basek < ((8*64)+(8*16))) && (sizek > ((8*64)+(16*16)))) {
- k8_ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek);
+ ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek);
idx += 0x10;
basek = (8*64)+(16*16);
sizek = limitk - ((8*64)+(16*16));
@@ -323,7 +488,7 @@
unsigned pre_sizek;
pre_sizek = mmio_basek - basek;
if(pre_sizek>0) {
- k8_ram_resource(dev, (idx | i), basek, pre_sizek);
+ ram_resource(dev, (idx | i), basek, pre_sizek);
idx += 0x10;
sizek -= pre_sizek;
}
@@ -342,22 +507,223 @@
sizek -= (4*1024*1024 - mmio_basek);
}
}
- k8_ram_resource(dev, (idx | i), basek, sizek);
+ ram_resource(dev, (idx | i), basek, sizek);
idx += 0x10;
}
+
+ amdk8_set_resources(dev);
+
phase4_set_resources(&dev->link[0]);
}
+static unsigned int amdk8_scan_chain(struct device *domain,
+ struct device* k8dev,
+ unsigned link, unsigned sblink,
+ unsigned int max, unsigned offset_unitid)
+{
+
+ u32 link_type;
+ int i;
+ u32 busses, config_busses;
+ unsigned free_reg, config_reg;
+ unsigned ht_unitid_base[4]; // here assume only 4 HT device on chain
+ unsigned max_bus;
+ unsigned min_bus;
+ unsigned max_devfn;
+ unsigned nodeid = amdk8_nodeid(k8dev);
+ printk(BIOS_SPEW, "%s node %x link %x\n", __func__, nodeid, link);
+ k8dev->link[link].cap = 0x80 + (link * 0x20);
+ do {
+ link_type = pci_read_config32(k8dev, k8dev->link[link].cap + 0x18);
+ } while (link_type & ConnectionPending);
+ if (!(link_type & LinkConnected)) {
+ return max;
+ }
+ printk(BIOS_DEBUG, "amdk8_scan_chain: link %d is connected\n", link);
+ do {
+ link_type = pci_read_config32(k8dev, k8dev->link[link].cap + 0x18);
+ } while (!(link_type & InitComplete));
+ if (!(link_type & NonCoherent)) {
+ return max;
+ }
+ /* See if there is an available configuration space mapping
+ * register in function 1.
+ */
+ free_reg = 0;
+ for (config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
+ u32 config;
+ config = f1_read_config32(config_reg);
+ if (!free_reg && ((config & 3) == 0)) {
+ free_reg = config_reg;
+ continue;
+ }
+ if (((config & 3) == 3) &&
+ (((config >> 4) & 7) == nodeid) &&
+ (((config >> 8) & 3) == link)) {
+ break;
+ }
+ }
+ if (free_reg && (config_reg > 0xec)) {
+ config_reg = free_reg;
+ }
+ /* If we can't find an available configuration space mapping
+ * register skip this bus
+ */
+ if (config_reg > 0xec) {
+ return max;
+ }
+
+ /* Set up the primary, secondary and subordinate bus numbers.
+ * We have no idea how many busses are behind this bridge yet,
+ * so we set the subordinate bus number to 0xff for the moment.
+ */
+#if SB_HT_CHAIN_ON_BUS0 > 0
+ // first chain will on bus 0
+ if ((nodeid == 0) && (sblink == link)) { // actually max is 0 here
+ min_bus = max;
+ }
+ #if SB_HT_CHAIN_ON_BUS0 > 1
+ // second chain will be on 0x40, third 0x80, forth 0xc0
+ else {
+ min_bus = ((max >> 6) + 1) * 0x40;
+ }
+ max = min_bus;
+ #else
+ //other ...
+ else {
+ min_bus = ++max;
+ }
+ #endif
+#else
+ min_bus = ++max;
+#endif
+ max_bus = 0xff;
+
+ k8dev->link[link].secondary = min_bus;
+ k8dev->link[link].subordinate = max_bus;
+
+ /* Read the existing primary/secondary/subordinate bus
+ * number configuration.
+ */
+ busses = pci_read_config32(k8dev, k8dev->link[link].cap + 0x14);
+ config_busses = f1_read_config32(config_reg);
+
+ /* Configure the bus numbers for this bridge: the configuration
+ * transactions will not be propagates by the bridge if it is
+ * not correctly configured
+ */
+ busses &= 0xff000000;
+ busses |= (((unsigned int)(k8dev->bus->secondary) << 0) |
+ ((unsigned int)(k8dev->link[link].secondary) << 8) |
+ ((unsigned int)(k8dev->link[link].subordinate) << 16));
+ pci_write_config32(k8dev, k8dev->link[link].cap + 0x14, busses);
+
+ config_busses &= 0x000fc88;
+ config_busses |= (3 << 0) | /* rw enable, no device compare */
+ ((nodeid & 7) << 4) |
+ ((link & 3) << 8) |
+ ((k8dev->link[link].secondary) << 16) |
+ ((k8dev->link[link].subordinate) << 24);
+ f1_write_config32(config_reg, config_busses);
+
+ /* Now we can scan all of the subordinate busses i.e. the
+ * chain on the hypertranport link
+ */
+ for (i = 0; i < 4; i++) {
+ ht_unitid_base[i] = 0x20;
+ }
+
+ max_devfn = PCI_DEVFN(0x1f, 7);
+
+ max = hypertransport_scan_chain(k8dev, &domain->link[link], 0,
+ max_devfn, max, ht_unitid_base,
+ offset_unitid);
+
+ /* We know the number of busses behind this bridge. Set the
+ * subordinate bus number to it's real value
+ */
+ k8dev->link[link].subordinate = max;
+ busses = (busses & 0xff00ffff) |
+ ((unsigned int)(k8dev->link[link].subordinate) << 16);
+ pci_write_config32(k8dev, k8dev->link[link].cap + 0x14, busses);
+
+ config_busses = (config_busses & 0x00ffffff) |
+ (k8dev->link[link].subordinate << 24);
+ f1_write_config32(config_reg, config_busses);
+
+ {
+ // config config_reg, and ht_unitid_base to update hcdn_reg;
+ int index;
+ unsigned temp = 0;
+ index = (config_reg - 0xe0) >> 2;
+ for (i = 0; i < 4; i++) {
+ temp |= (ht_unitid_base[i] & 0xff) << (i * 8);
+ }
+
+ sysconf.hcdn_reg[index] = temp;
+
+ }
+
+ printk(BIOS_SPEW, "amdk8_scan_chain done\n");
+ return max;
+}
+
+static unsigned int amdk8_scan_chains(struct device *domain, struct device *k8dev,
+ unsigned int max)
+{
+ unsigned nodeid;
+ unsigned link;
+ unsigned sblink = 0;
+ unsigned offset_unitid = 0;
+ nodeid = amdk8_nodeid(k8dev);
+
+ printk(BIOS_DEBUG, "amdk8_scan_chains\n");
+
+ if (nodeid == 0) {
+ sblink = (pci_read_config32(k8dev, 0x64) >> 8) & 3;
+#if SB_HT_CHAIN_ON_BUS0 > 0
+#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+ offset_unitid = 1;
+#endif
+ // do southbridge ht chain first, in case s2885 put southbridge chain (8131/8111) on link2,
+ // but put 8151 on link0
+ max =
+ amdk8_scan_chain(domain, k8dev, sblink, sblink, max,
+ offset_unitid);
+#endif
+ }
+
+ for (link = 0; link < k8dev->links; link++) {
+#if SB_HT_CHAIN_ON_BUS0 > 0
+ if ((nodeid == 0) && (sblink == link))
+ continue; //already done
+#endif
+ offset_unitid = 0;
+#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if ((nodeid == 0) && (sblink == link))
+#endif
+ offset_unitid = 1;
+#endif
+
+ max = amdk8_scan_chain(domain, k8dev, link, sblink, max,
+ offset_unitid);
+ }
+
+ return max;
+}
+
static unsigned int k8_domain_scan_bus(struct device * dev, unsigned int max)
{
unsigned reg;
int i;
- printk(BIOS_DEBUG, "k8_domain_scan_bus\n");
+
+ printk(BIOS_DEBUG, "%s: %s \n", __func__, dev->dtsname);
+
/* Unmap all of the HT chains */
for(reg = 0xe0; reg <= 0xec; reg += 4) {
f1_write_config32(reg, 0);
}
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max);
/* Tune the hypertransport transaction for best performance.
* Including enabling relaxed ordering if it is safe.
@@ -379,9 +745,18 @@
pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc);
}
}
+
+ max = amdk8_scan_chains(dev, __f0_dev[0], max);
+
return max;
}
+static void k8_pci_domain_enable_resources(struct device *dev)
+{
+ printk(BIOS_DEBUG, "%s\n", __func__);
+ enable_childrens_resources(dev);
+}
+
struct device_operations k8domain_ops = {
.id = {.type = DEVICE_ID_APIC_CLUSTER,
{.pci_domain = {.vendor = PCI_VENDOR_ID_AMD,
@@ -390,7 +765,6 @@
.phase3_scan = k8_domain_scan_bus,
.phase4_read_resources = k8_pci_domain_read_resources,
.phase4_set_resources = k8_pci_domain_set_resources,
- .phase5_enable_resources = enable_childrens_resources,
- .ops_pci = &pci_dev_ops_pci,
+ .phase5_enable_resources = k8_pci_domain_enable_resources,
.ops_pci_bus = &pci_cf8_conf1,
};
Modified: coreboot-v3/northbridge/amd/k8/pci
===================================================================
--- coreboot-v3/northbridge/amd/k8/pci 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/northbridge/amd/k8/pci 2009-01-05 16:00:32 UTC (rev 1094)
@@ -20,5 +20,4 @@
{
device_operations = "k8_ops";
- bridge;
};
Modified: coreboot-v3/northbridge/amd/k8/pci.c
===================================================================
--- coreboot-v3/northbridge/amd/k8/pci.c 2008-12-31 20:02:03 UTC (rev 1093)
+++ coreboot-v3/northbridge/amd/k8/pci.c 2009-01-05 16:00:32 UTC (rev 1094)
@@ -46,538 +46,6 @@
#include <lib.h>
#include <lapic.h>
-u32 f1_read_config32(unsigned int reg);
-void f1_write_config32(unsigned int reg, u32 value);
-unsigned int amdk8_nodeid(struct device *dev);
-
-static unsigned int amdk8_scan_chain(struct device *dev, unsigned nodeid,
- unsigned link, unsigned sblink,
- unsigned int max, unsigned offset_unitid)
-{
-
- u32 link_type;
- int i;
- u32 busses, config_busses;
- unsigned free_reg, config_reg;
- unsigned ht_unitid_base[4]; // here assume only 4 HT device on chain
- unsigned max_bus;
- unsigned min_bus;
- unsigned max_devfn;
- printk(BIOS_SPEW, "amdk8_scan_chain link %x\n", link);
- dev->link[link].cap = 0x80 + (link * 0x20);
- do {
- link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
- } while (link_type & ConnectionPending);
- if (!(link_type & LinkConnected)) {
- return max;
- }
- printk(BIOS_DEBUG, "amdk8_scan_chain: link %d is connected\n", link);
- do {
- link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
- } while (!(link_type & InitComplete));
- if (!(link_type & NonCoherent)) {
- return max;
- }
- /* See if there is an available configuration space mapping
- * register in function 1.
- */
- free_reg = 0;
- for (config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
- u32 config;
- config = f1_read_config32(config_reg);
- if (!free_reg && ((config & 3) == 0)) {
- free_reg = config_reg;
- continue;
- }
- if (((config & 3) == 3) &&
- (((config >> 4) & 7) == nodeid) &&
- (((config >> 8) & 3) == link)) {
- break;
- }
- }
- if (free_reg && (config_reg > 0xec)) {
- config_reg = free_reg;
- }
- /* If we can't find an available configuration space mapping
- * register skip this bus
- */
- if (config_reg > 0xec) {
- return max;
- }
-
- /* Set up the primary, secondary and subordinate bus numbers.
- * We have no idea how many busses are behind this bridge yet,
- * so we set the subordinate bus number to 0xff for the moment.
- */
-#if SB_HT_CHAIN_ON_BUS0 > 0
- // first chain will on bus 0
- if ((nodeid == 0) && (sblink == link)) { // actually max is 0 here
- min_bus = max;
- }
- #if SB_HT_CHAIN_ON_BUS0 > 1
- // second chain will be on 0x40, third 0x80, forth 0xc0
- else {
- min_bus = ((max >> 6) + 1) * 0x40;
- }
- max = min_bus;
- #else
- //other ...
- else {
- min_bus = ++max;
- }
- #endif
-#else
- min_bus = ++max;
-#endif
- max_bus = 0xff;
-
- dev->link[link].secondary = min_bus;
- dev->link[link].subordinate = max_bus;
-
- /* Read the existing primary/secondary/subordinate bus
- * number configuration.
- */
- busses = pci_read_config32(dev, dev->link[link].cap + 0x14);
- config_busses = f1_read_config32(config_reg);
-
- /* Configure the bus numbers for this bridge: the configuration
- * transactions will not be propagates by the bridge if it is
- * not correctly configured
- */
- busses &= 0xff000000;
- busses |= (((unsigned int)(dev->bus->secondary) << 0) |
- ((unsigned int)(dev->link[link].secondary) << 8) |
- ((unsigned int)(dev->link[link].subordinate) << 16));
- pci_write_config32(dev, dev->link[link].cap + 0x14, busses);
-
- config_busses &= 0x000fc88;
- config_busses |= (3 << 0) | /* rw enable, no device compare */
- ((nodeid & 7) << 4) |
- ((link & 3) << 8) |
- ((dev->link[link].secondary) << 16) |
- ((dev->link[link].subordinate) << 24);
- f1_write_config32(config_reg, config_busses);
-
- /* Now we can scan all of the subordinate busses i.e. the
- * chain on the hypertranport link
- */
- for (i = 0; i < 4; i++) {
- ht_unitid_base[i] = 0x20;
- }
-
- if (min_bus == 0)
- max_devfn = (0x17 << 3) | 7;
- else
- max_devfn = (0x1f << 3) | 7;
-
- max =
- hypertransport_scan_chain(&dev->link[link], 0, max_devfn, max,
- ht_unitid_base, offset_unitid);
-
- /* We know the number of busses behind this bridge. Set the
- * subordinate bus number to it's real value
- */
- dev->link[link].subordinate = max;
- busses = (busses & 0xff00ffff) |
- ((unsigned int)(dev->link[link].subordinate) << 16);
- pci_write_config32(dev, dev->link[link].cap + 0x14, busses);
-
- config_busses = (config_busses & 0x00ffffff) |
- (dev->link[link].subordinate << 24);
- f1_write_config32(config_reg, config_busses);
-
- {
- // config config_reg, and ht_unitid_base to update hcdn_reg;
- int index;
- unsigned temp = 0;
- index = (config_reg - 0xe0) >> 2;
- for (i = 0; i < 4; i++) {
- temp |= (ht_unitid_base[i] & 0xff) << (i * 8);
- }
-
- sysconf.hcdn_reg[index] = temp;
-
- }
-
- printk(BIOS_SPEW, "amdk8_scan_chain done\n");
- return max;
-}
-
-static unsigned int amdk8_scan_chains(struct device *dev, unsigned int max)
-{
- unsigned nodeid;
- unsigned link;
- unsigned sblink = 0;
- unsigned offset_unitid = 0;
- nodeid = amdk8_nodeid(dev);
-
- printk(BIOS_DEBUG, "amdk8_scan_chains\n");
-
- if (nodeid == 0) {
- sblink = (pci_read_config32(dev, 0x64) >> 8) & 3;
-#if SB_HT_CHAIN_ON_BUS0 > 0
-#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
- offset_unitid = 1;
-#endif
- // do southbridge ht chain first, in case s2885 put southbridge chain (8131/8111) on link2,
- // but put 8151 on link0
- max =
- amdk8_scan_chain(dev, nodeid, sblink, sblink, max,
- offset_unitid);
-#endif
- }
-
- for (link = 0; link < dev->links; link++) {
-#if SB_HT_CHAIN_ON_BUS0 > 0
- if ((nodeid == 0) && (sblink == link))
- continue; //already done
-#endif
- offset_unitid = 0;
-#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
-#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
- if ((nodeid == 0) && (sblink == link))
-#endif
- offset_unitid = 1;
-#endif
-
- max = amdk8_scan_chain(dev, nodeid, link, sblink, max,
- offset_unitid);
- }
-
- return max;
-}
-
-/**
- * reg_useable
- * @param reg register to check
- * @param goal_dev device to own the resource
- * @param goal_nodeid node number
- * @param goal_link link number
- * @return 0 if not useable, 1 if useable, or 2 if the pair is free
- */
-static int reg_useable(unsigned reg,
- struct device *goal_dev, unsigned goal_nodeid,
- unsigned goal_link)
-{
- struct resource *res = NULL;
- struct device *dev = NULL;
- unsigned nodeid = 0, link = 0;
- int result;
-
- /* Look for the resource that matches this register. */
- while (!res
- && (dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, 0x1100, dev))) {
- for (link = 0; !res && (link < 3); link++) {
- res = probe_resource(dev, 0x100 + (reg | link));
- }
- nodeid++;
- }
-
- /* If no allocated resource was found, it is free - return 2 */
- result = 2;
- if (res) {
- result = 0;
- /* If the resource is allocated to the link and node already */
- if ((goal_link == (link - 1)) &&
- (goal_nodeid == (nodeid - 1)) && (res->flags <= 1)) {
- result = 1;
- }
- }
-
- return result;
-}
-
-static struct resource *amdk8_find_iopair(struct device *dev, unsigned nodeid,
- unsigned link)
-{
- struct resource *resource;
- unsigned free_reg, reg;
- resource = NULL;
- free_reg = 0;
- for (reg = 0xc0; reg <= 0xd8; reg += 0x8) {
- int result;
- result = reg_useable(reg, dev, nodeid, link);
- if (result == 1) {
- /* I have been allocated this one */
- break;
- } else if (result > 1) {
- /* I have a free register pair */
- free_reg = reg;
- }
- }
- if (reg > 0xd8) {
- reg = free_reg;
- }
- if (reg > 0) {
- resource = new_resource(dev, 0x100 + (reg | link));
- }
- return resource;
-}
-
-static struct resource *amdk8_find_mempair(struct device *dev, unsigned nodeid,
- unsigned link)
-{
- struct resource *resource;
- unsigned free_reg, reg;
- resource = NULL;
- free_reg = 0;
- for (reg = 0x80; reg <= 0xb8; reg += 0x8) {
- int result;
- result = reg_useable(reg, dev, nodeid, link);
- if (result == 1) {
- /* I have been allocated this one */
- break;
- } else if (result > 1) {
- /* I have a free register pair */
- free_reg = reg;
- }
- }
- if (reg > 0xb8) {
- reg = free_reg;
- }
- if (reg > 0) {
- resource = new_resource(dev, 0x100 + (reg | link));
- }
- return resource;
-}
-
-static void amdk8_link_read_bases(struct device *dev, unsigned nodeid,
- unsigned link)
-{
- struct resource *resource;
-
- /* Initialize the io space constraints on the current bus */
- resource = amdk8_find_iopair(dev, nodeid, link);
- if (resource) {
- resource->base = 0;
- resource->size = 0;
- resource->align = log2c(HT_IO_HOST_ALIGN);
- resource->gran = log2c(HT_IO_HOST_ALIGN);
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO;
- }
-
- /* Initialize the prefetchable memory constraints on the current bus */
- resource = amdk8_find_mempair(dev, nodeid, link);
- if (resource) {
- resource->base = 0;
- resource->size = 0;
- resource->align = log2c(HT_MEM_HOST_ALIGN);
- resource->gran = log2c(HT_MEM_HOST_ALIGN);
- resource->limit = 0xffffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- }
-
- /* Initialize the memory constraints on the current bus */
- resource = amdk8_find_mempair(dev, nodeid, link);
- if (resource) {
- resource->base = 0;
- resource->size = 0;
- resource->align = log2c(HT_MEM_HOST_ALIGN);
- resource->gran = log2c(HT_MEM_HOST_ALIGN);
- resource->limit = 0xffffffffffULL;
- resource->flags = IORESOURCE_MEM;
- }
-}
-
-static void amdk8_read_resources(struct device *dev)
-{
- printk(BIOS_DEBUG, "amdk8_read_resources\n");
- unsigned nodeid, link;
- nodeid = amdk8_nodeid(dev);
-
- for (link = 0; link < dev->links; link++) {
- if (dev->link[link].children) {
- printk(BIOS_DEBUG, "amdk8_read_resources link %d\n",
- link);
- amdk8_link_read_bases(dev, nodeid, link);
- }
- }
- printk(BIOS_DEBUG, "amdk8_read_resources done\n");
-}
-
-static void amdk8_set_resource(struct device *dev, struct resource *resource,
- unsigned nodeid)
-{
- resource_t rbase, rend;
- unsigned reg, link;
- char buf[50];
- printk(BIOS_DEBUG, "amdk8_set_resource\n");
- /* Make certain the resource has actually been set */
- if (!(resource->flags & IORESOURCE_ASSIGNED)) {
- return;
- }
-
- /* If I have already stored this resource don't worry about it */
- if (resource->flags & IORESOURCE_STORED) {
- return;
- }
-
- /* Only handle PCI memory and IO resources */
- if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
- return;
-
- /* Ensure I am actually looking at a resource of function 1 */
- if (resource->index < 0x100) {
- return;
- }
- /* Get the base address */
- rbase = resource->base;
-
- /* Get the limit (rounded up) */
- rend = resource_end(resource);
-
- /* Get the register and link */
- reg = resource->index & 0xfc;
- link = resource->index & 3;
-
- if (resource->flags & IORESOURCE_IO) {
- u32 base, limit;
- base = f1_read_config32(reg);
- limit = f1_read_config32(reg + 0x4);
- base &= 0xfe000fcc;
- base |= rbase & 0x01fff000;
- base |= 3;
- limit &= 0xfe000fc8;
- limit |= rend & 0x01fff000;
- limit |= (link & 3) << 4;
- limit |= (nodeid & 7);
-
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
- printk(BIOS_SPEW,
- "%s, enabling legacy VGA IO forwarding for %s link %x\n",
- __func__, dev_path(dev), link);
- base |= PCI_IO_BASE_VGA_EN;
- }
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) {
- base |= PCI_IO_BASE_NO_ISA;
- }
-
- f1_write_config32(reg + 0x4, limit);
- f1_write_config32(reg, base);
- } else if (resource->flags & IORESOURCE_MEM) {
- u32 base, limit;
- base = f1_read_config32(reg);
- limit = f1_read_config32(reg + 0x4);
- base &= 0x000000f0;
- base |= (rbase >> 8) & 0xffffff00;
- base |= 3;
- limit &= 0x00000048;
- limit |= (rend >> 8) & 0xffffff00;
- limit |= (link & 3) << 4;
- limit |= (nodeid & 7);
- f1_write_config32(reg + 0x4, limit);
- f1_write_config32(reg, base);
- }
- resource->flags |= IORESOURCE_STORED;
- sprintf(buf, " <node %d link %d>", nodeid, link);
- report_resource_stored(dev, resource, buf);
-}
-
-/**
- *
- * I tried to reuse the resource allocation code in amdk8_set_resource()
- * but it is too diffcult to deal with the resource allocation magic.
- */
-#ifdef CONFIG_MULTIPLE_VGA_INIT
-extern struct device *vga_pri; // the primary vga device, defined in device.c
-#endif
-
-static void amdk8_create_vga_resource(struct device *dev, unsigned nodeid)
-{
- struct resource *resource;
- unsigned link;
- u32 base, limit;
- unsigned reg;
-
- /* find out which link the VGA card is connected,
- * we only deal with the 'first' vga card */
- for (link = 0; link < dev->links; link++) {
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
-#ifdef CONFIG_MULTIPLE_VGA_INIT
- printk(BIOS_DEBUG,
- "VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n",
- vga_pri->bus->secondary,
- dev->link[link].secondary,
- dev->link[link].subordinate);
- /* We need to make sure the vga_pri is under the link */
- if ((vga_pri->bus->secondary >=
- dev->link[link].secondary)
- && (vga_pri->bus->secondary <=
- dev->link[link].subordinate)
- )
-#endif
- break;
- }
- }
-
- /* no VGA card installed */
- if (link == dev->links)
- return;
-
- printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n",
- dev_path(dev), nodeid, link);
-
- /* allocate a temp resrouce for legacy VGA buffer */
- resource = amdk8_find_mempair(dev, nodeid, link);
- if (!resource) {
- printk(BIOS_DEBUG,
- "VGA: Can not find free mmio reg for legacy VGA buffer\n");
- return;
- }
- resource->base = 0xa0000;
- resource->size = 0x20000;
-
- /* write the resource to the hardware */
- reg = resource->index & 0xfc;
- base = f1_read_config32(reg);
- limit = f1_read_config32(reg + 0x4);
- base &= 0x000000f0;
- base |= (resource->base >> 8) & 0xffffff00;
- base |= 3;
- limit &= 0x00000048;
- limit |= (resource_end(resource) >> 8) & 0xffffff00;
- limit |= (resource->index & 3) << 4;
- limit |= (nodeid & 7);
- f1_write_config32(reg + 0x4, limit);
- f1_write_config32(reg, base);
-
- /* release the temp resource */
- resource->flags = 0;
-}
-
-static void amdk8_set_resources(struct device *dev)
-{
- unsigned nodeid, link;
- int i;
-
- /* Find the nodeid */
- nodeid = amdk8_nodeid(dev);
-
- printk(BIOS_DEBUG, "amdk8_set_resources: nodeid %d\n", nodeid);
- amdk8_create_vga_resource(dev, nodeid);
-
- /* Set each resource we have found */
- for (i = 0; i < dev->resources; i++) {
- amdk8_set_resource(dev, &dev->resource[i], nodeid);
- }
-
- for (link = 0; link < dev->links; link++) {
- struct bus *bus;
- bus = &dev->link[link];
- if (bus->children) {
- phase4_set_resources(bus);
- }
- }
-}
-
-static void amdk8_enable_resources(struct device *dev)
-{
- printk(BIOS_DEBUG, "amdk8_enable_resources\n");
- pci_dev_enable_resources(dev);
- enable_childrens_resources(dev);
-}
-
static void mcf0_control_init(struct device *dev)
{
printk(BIOS_DEBUG, "NB: Function 0 Misc Control.. Nothing to do ...");
@@ -585,21 +53,15 @@
printk(BIOS_DEBUG, "done.\n");
}
-#ifdef CONFIG_PCI_64BIT_PREF_MEM
-#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)
-#endif
-
struct device_operations k8_ops = {
.id = {.type = DEVICE_ID_PCI,
{.pci = {.vendor = PCI_VENDOR_ID_AMD,
.device = 0x1100}}},
.constructor = default_device_constructor,
- .reset_bus = pci_bus_reset,
- .phase3_scan = amdk8_scan_chains,
- .phase4_read_resources = amdk8_read_resources,
- .phase4_set_resources = amdk8_set_resources,
- .phase5_enable_resources = amdk8_enable_resources,
+ .phase3_scan = NULL,
+ .phase4_read_resources = pci_dev_read_resources,
+ .phase4_set_resources = pci_set_resources,
+ .phase5_enable_resources = pci_dev_enable_resources,
.phase6_init = mcf0_control_init,
- .ops_pci = &pci_dev_ops_pci,
.ops_pci_bus = &pci_cf8_conf1,
};
More information about the coreboot
mailing list