[coreboot] C3/CN400 Support - coreboot_tables

Harrison, Jon (SELEX GALILEO, UK) jon.harrison at selexgalileo.com
Wed Jul 1 12:42:44 CEST 2009


Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.

Patch should work against r4381 (or later ?)

This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)

The coreboot_table issue seems to have been automagically resolved by
the latest core files.

It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.

Signed-off-by: Jon Harrison <bothlyn at blueyonder.co.uk>

-----Original Message-----
From: ron minnich [mailto:rminnich at gmail.com] 
Sent: 30 June 2009 16:44
To: Harrison, Jon (SELEX GALILEO, UK)
Subject: Re: [coreboot] C3/CN400 Support - coreboot_tables

                    *** WARNING ***

 This message has originated outside your organisation,
  either from an external partner or the Global Internet. 
      Keep this in mind if you answer this message.

is your port visible anywhere?



SELEX Sensors and Airborne Systems Limited
Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL
A company registered in England & Wales.  Company no. 02426132
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cn400-patch-v3.patch
Type: application/octet-stream
Size: 300774 bytes
Desc: cn400-patch-v3.patch
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090701/6226b810/attachment.obj>

More information about the coreboot mailing list