[coreboot] ACPI on m57sli v1.0

[Harald Gutmann]

On Thursday 02 July 2009 20:58:42 Andreas B. Mundt wrote:
> On Thursday 02 July 2009 20:22:50 Harald Gutmann wrote:
> > On Thursday 02 July 2009 17:56:30 Andreas B. Mundt wrote:
> > > Hi everybody,
> > >
> > > just noticed that my parallel port printer unfortunately only works
> > >
> > > with the prop. BIOS:
> > > >From dmesg:
> > >
> > > coreboot:
> > > [   54.388956] lp: driver loaded but no devices found
> > > [   54.409159] ppdev: user-space parallel port driver
> > >
> > > prop. BIOS:
> > > [  179.494713] lp0: using parport0 (interrupt-driven).
> > > [  179.516281] ppdev: user-space parallel port driver
> >
> > With the attached patch I get the following output on modprobe parport:
> > [   28.848297] lp0: using parport0 (polling).
> > [   28.858860] ppdev: user-space parallel port driver
> >
> > The patch also turns on the floppy device, but I've none here to verify
> > if it will work. It would be great if you can test if floppy works, so
> > that we could mark the last two "not-working" parts as OK in the wiki, if
> > it the floppy does its job
>
> Sry, I forgot to sign it off:
> Signed-off-by: Harald Gutmann <harald.gutmann at gmx.net>
>
> Patch tested succesfully with parallel-port printer.
>
> Acked-by: Andreas B. Mundt
Thanks, r4396.

>
> Thanks,
>
> 	Andi
Regards,
Harald

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090702/e92da727/attachment.sig>