[coreboot] build service results for r4394
info at coresystems.de
Thu Jul 2 21:19:41 CEST 2009
Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "myles" checked in revision 4394 to
the coreboot repository. This caused the following
Move the v3 resource allocator to v2.
1. Separate resource allocation into:
A. Read Resources
B. Avoid fixed resources (constrain limits)
C. Allocate resources
D. Set resources
Resources which have IORESOURCE_FIXED set in the flags constrain the placement
of other resources. All fixed resources will end up outside (above or below)
the allocated resources.
Domains usually start with base = 0 and limit = 2^address_bits - 1.
I've added an IOAPIC to all platforms so that the old limit of 0xfec00000 is
still there for resources. Some platforms may want to change that, but I didn't
want to break anyone's board.
Resources are allocated in a single block for memory and another for I/O.
Currently the resource allocator doesn't support holes.
Signed-off-by: Myles Watson <mylesgw at gmail.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Patrick Georgi <patrick.georgi at coresystems.de>
Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4394&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2
Compilation of via:epia-m700 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4394&device=epia-m700&vendor=via&num=2
If something broke during this checkin please be a pain
in myles's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
coreboot automatic build system
More information about the coreboot