[coreboot] flashrom -V from Gigabyte EX58-UD4P

Warren Turkal wt at penguintechs.org
Mon Jun 8 03:30:41 CEST 2009


I have good news. I took a huge chance and flashed my Gigabyte
EX58-UD4P[1] bios with flashrom. I used the Gigabyte bios, which seems
to be an LHA archive, strangely enough. I used the tip of the SVN.

wt at mediakitchen:~/projects/coreboot/coreboot-v3/util/flashrom$ svn info
Path: .
URL: svn://coreboot.org/flashrom/trunk
Repository Root: svn://coreboot.org/flashrom
Repository UUID: 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Revision: 580
Node Kind: directory
Schedule: normal
Last Changed Author: hailfinger
Last Changed Rev: 580
Last Changed Date: 2009-06-05 13:53:07 -0700 (Fri, 05 Jun 2009)


I had a successful flash, but flashrom didn't seem to be friends with my chips.

I attached the output of flashrom -V as flashrom_V.txt.

Here's the output of flashrom -wv ex58ud4p.f8:

root at mediakitchen:~/test#
../projects/coreboot/coreboot-v3/util/flashrom/flashrom -wv
ex58ud4p.f8
flashrom v0.9.0-r580
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write... OK.
Calibrating delay loop... OK.
Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000.
Flash image seems to be a legacy BIOS. Disabling checks.
Verifying flash... FAILED at 0x000ec000!  Expected=0xff, Read=0x45


A second time yielded the same FAILED. However, this worked.

root at mediakitchen:~/test#
../projects/coreboot/coreboot-v3/util/flashrom/flashrom -Ewv
ex58ud4p.f8
flashrom v0.9.0-r580
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write... OK.
Calibrating delay loop... OK.
Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000.
Erasing flash chip... SUCCESS.
Verifying flash... VERIFIED.


The difference is that I manually told it to erase the flash chip. The
system boots properly with the new Gigabyte bios.

BTW, this mobo has the Gigabyte Dual Bios technology. AFAICT, I only
flashed the primary bios, but it definitely works.

I also found some docs that may be useful in getting the Intel X58
chipset support at [2]. Please let me know if these are detailed
enough to do anything useful.

Thanks for working so hard to make a open source bios a reality.

[1]http://www.gigabyte.us/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2985&ProductName=GA-EX58-UD4P
[2]http://www.intel.com/products/desktop/chipsets/x58/x58-technicaldocuments.htm

Thanks,
wt
-------------- next part --------------
flashrom v0.9.0-r580
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write... 
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x9

Root Complex Register Block address = 0xfed1c000
GCS = 0x464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x0008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 0, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x0000ffff (FRAP)
BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00426004 (SSFS, SSFC)
0x94: 0x0006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES... 
program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching enabled, caching enabled, OK.
Calibrating delay loop... 760M loops per second, 100 myus = 202 us. OK.
Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x22, id2 0xe5
Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x25, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x22, id2 0xe5
Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x25, id2 0x74
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25F512B, 64 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25FS010, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT25FS040, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF041, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT26F004, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xea, id2 0x18, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A25L40P, 512 KB: RDID returned 0xbf 0x25 0x8e 0xbf
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xff
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xff
Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B10, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B20, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B40, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B80, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B16, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B32, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25B64, 8192 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F40, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F80, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Eon EN25F16, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x22, id2 0x58
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x22, id2 0x58
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x22, id2 0xe5
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x74
Probing for Macronix MX25L512, 64 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1005, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L2005, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L4005, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xff
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xff
Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0x22, id2 0xe5
Probing for Numonyx M25PE10, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE20, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE40, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV010, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV020, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV040, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm25LV512, 64 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x74
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF016B, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF032B, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF040B, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for SST SST25VF040.REMS, 512 KB: REMS returned bf 8e.
probe_spi_rems: id1 0xbf, id2 0x8e
Probing for SST SST25VF040B.REMS, 512 KB: REMS returned bf 8e.
probe_spi_rems: id1 0xbf, id2 0x8e
Probing for SST SST25VF080B, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Chip status register is 00
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x22, id2 0xe5
Probing for SST SST29EE010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xea, id2 0x18, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x25, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x22, id2 0xe5
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x25, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x74
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x25, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P10-A, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P20, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P40, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P40-old, 512 KB: RDID returned 0xbf 0x25 0x8e
Probing for ST M25P80, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P16, 2048 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P32, 4096 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P64, 8192 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M25P128, 16384 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x22, id2 0xe5
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x22, id2 0x58
Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x22, id2 0xe5
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x22, id2 0xe5
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x25, id2 0x74
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x25, id2 0x74
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x22, id2 0xe5
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x74
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x20, 256 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x40, 512 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W25x80, 1024 KB: RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x60, id2 0x3d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: 
===
  Probing disabled for Winbond W29EE011 because the probing sequence puts the
  AMIC A49LF040A in a funky state.
  Use 'flashrom -c W29EE011' if you have a board with this chip.
===
Probing for Winbond W39V040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x22, id2 0xe5, id1 parity violation
Probing for Winbond W39V040FA, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x22, id2 0xe5, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x25, id2 0x74, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0x25, id2 0x74
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x22, id2 0xe5
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000.
RDID returned 0xbf 0x25 0x8e
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Not unmapping zero size at (nil)
No operations were specified.


More information about the coreboot mailing list