[coreboot] How to convert a v2 board to CBFS?
mylesgw at gmail.com
Mon Jun 8 18:31:32 CEST 2009
On Mon, Jun 8, 2009 at 9:13 AM, Uwe Hermann <uwe at hermann-uwe.de> wrote:
> I tried converting the MSI MS-6178 (i810 chipset) to CBFS by looking
> at the recent CBFS patches which went in and blindly guessing what I
> have to do :) It _seemed_ to work (builds fine), but doesn't boot then.
I don't have the board, but I tried to see if there was anything
I built images with and without CBFS, and looked at the coreboot.map
and the hexdumps of the files. It looked fine to me.
> I see 0x0E on the POST card, no serial output at all.
I ran both images in qemu, and they both fail at the same point, but
after printing a banner:
coreboot-2.0.0-r4352M.0Fallback Mon Jun 8 10:27:52 MDT 2009 starting...
Device not found, Corey probably screwed up!
I wanted to see if the jumps were set up correctly. That makes me
wonder why you get no serial output. XIP settings? They seem right,
> Am I doing something wrong, or missing some code changes?
I don't see anything. Sorry I couldn't help more.
More information about the coreboot