[coreboot] Flashrom support for EPIA-N(L) - patch for review
libv at skynet.be
Fri Jun 19 15:35:51 CEST 2009
On Fri, Jun 19, 2009 at 12:06:51PM +0100, Harrison, Jon (SELEX GALILEO, UK) wrote:
> Received and understood, then the basic issue is that at this point my
> coreboot build is still broken and will not boot, so there are no
> tables. (I had not realised the tables were read from RAM rather than
> the ROM image)
> The upshot is that the flashrom ids are required to allow development
> from the original bios.... for the time being.
> Once the build is booting properly and flashrom can autodetect I will
> remove the ids. In the mean time I'm hoping that having this early
> flashrom support will help others to help in the effort for the
> If this is still all to immature for general release then fair enough,
> it can wait until things are working better.
No, this is reasonable, i will add an extra comment and commit.
Plus, i think that we need to track down some badly filled out boards,
pciid wise, so that we can change behaviour around the ids a bit. Make
it a bit tighter:
* require 2 main ids, always.
* don't allow -m when a valid subsystem id is there.
But that's a discussion for some other time, and anyway, it has a rather
More information about the coreboot