[coreboot] Intel Eagle Height evaluation board support
phueper at hueper.net
Wed Jun 24 15:53:56 CEST 2009
thats strange... yabel should print some output before it even touches
the copied ROM...
did you try a clean rebuild after changing the CONFIG values ?
On Wed, Jun 24, 2009 at 2:40 PM, Thomas JOURDAN<thomas.jourdan at gmail.com> wrote:
> Hi Pattrick
> With Yabel I have the following error :
> CBFS: Could not find file pci102b,2527.rom
> In cbfs, rom address for PCI: 03:00.0 = 00000000
> On card, rom address for PCI: 03:00.0 = fe800000
> copying VGA ROM Image from fe800000 to 0xc0000, 0x9000 bytes
> Unexpected Exception: 0 @ 10:0011bfa1 - Halting
> Code: 0 eflags: 00010046
> eax: 00000001 ebx: 00000061 ecx: 00000000 edx: 00000000
> edi: 00000003 esi: 00000000 ebp: 00155abc esp: 00155a98
> Setting CONFIG_YABEL_DEBUG_FLAGS to 0x9 (or 0x31FF) won't print more traces.
> 2009/6/24 Pattrick Hueper <phueper at hueper.net>:
>> On Tue, Jun 23, 2009 at 8:42 PM, Thomas JOURDAN<thomas.jourdan at gmail.com> wrote:
>>> * vga rom -> The evaluation board comes with a PCIe 1x Matrox G550
>>> graphics card. Coreboot fails to execute the vga rom (either x86emu,
>>> yabel or real mode). There is an exception 0x06 and everything will
>>> freeze. It could be the loadall instruction
>> i would be interested in a log with CONFIG_YABEL_DEBUG_FLAGS=0x9 to
>> see whats happening in yabel...
>> Regards, Patty
More information about the coreboot