[coreboot] Integrate the kernel into 49LF004...

Rick Ant rick_077 at yahoo.com
Mon Jun 29 05:14:51 CEST 2009

lspci" output (the 'lspci -tvnn' above doesn't show device names strangely).

00:00.0 Host bridge : Intel Corporation 82810 GMCH (Graphic Memory Controller Hub) (rev 03)
00:01.0 VGA Compatible controller : Intel Corporation 82810 (CGC) Chipset Graphics Controller (rev 03)
00:1e.0 PCI Bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
00:1f.0 ISA Bridge: Intel Corporation 82801AA ISA bridge (LPC) (rev 02)
00:1f.1 IDE Interface: Intel Corporation 82801AA IDE Controller  (rev 02)
00:1f.2 USB controller: Intel Corporation 82801AA USB Controller  (rev 02)
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller  (rev 02)
00:1f.5 Multimedia Audio Controller: Intel Corporation 82801AA AC'97 Audio Controller  (rev 02)
00:0a.0 Ethernet Controller: Realtek Semiconductor Co., Ltd. RTL-8319/8139C/8139C+ (rev 10)

--- On Fri, 6/26/09, Myles Watson <mylesgw at gmail.com> wrote:

From: Myles Watson <mylesgw at gmail.com>
Subject: Re: [coreboot] Integrate the kernel into 49LF004...
To: "Rick Ant" <rick_077 at yahoo.com>
Cc: "Cristi Magherusan" <Cristi.Magherusan at net.utcluj.ro>, coreboot at coreboot.org
Date: Friday, June 26, 2009, 5:52 AM

On Thu, Jun 25, 2009 at 9:23 PM, Rick Ant <rick_077 at yahoo.com> wrote:

Thanks for the info here's the info of my machine :
Step 1...
Board vendor : unknown
Processor    : Intel Pentium III
Northbridge  : Intel 82810
Southbridge  : Intel 82801 AA
BIOS Chip    : SST 49LF004

Network Chip : RTL 8100C
Memory Bank  : 1 Bank DDR SDRAM, I put on 128 Mbyte

Step 2 :
lspci -tvnn result:
-[00]-+-00.0 8086:7120
      +-01.0 8086:7121
      +-1e.0-[01]----0a.0 10ec:8139
      +-1f.0 8086:2410

      +-1f.1 8086:2411
      +-1f.2 8086:2412
      +-1f.3 8086:2413
      \-1f.5 8086:2415

Step 3 :
 Super I/O chip on this board : Winbond W83627 HG - AW
Step 4
 BIOS Device : SST 49LF004B 512 Kbytes EEPROM
So you can start with the code in src/mainboard/asus/mew-vm 

Change the super IO and the Config.lb to match your lspci.

Don't flash the board until you have a way to recover.

Where can I download BuildROM ?http://www.google.com/search?q=buildrom - first link



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090628/67bd1b9e/attachment.html>

More information about the coreboot mailing list