[coreboot] IRQ 9 on s2895 and s2892
mylesgw at gmail.com
Mon Mar 16 21:17:02 CET 2009
On Mon, Mar 16, 2009 at 1:23 PM, Rudolf Marek <r.marek at assembler.cz> wrote:
>> All of the other interrupts from 0x0-0xf are set as Edge triggered in
>> the mptable, so that seems likely.
> Fine. Second reason might be that the ExtInt pin is wrong for the APIC. I
> mean it is set wrongly. To which pin sets the original BIOS the ExtInt IRQ?
Do I need to decode the mptable to know that? Is there a utility to
do that? I've gotten as far as "ISA is bus 86", but I'm struggling to
find ExtINT in there. I don't see anything that matches what I
>>> Can you dump here the 0x4d0 and 0x4d1 so we can check how the
>>> is set.
>> Again I'm ignorant. How do I dump those values?
> You arent, its important to ask!
> #isadump -f 0x4d0
> you should see the two bytes decoding at 0x4d0 and 0x4d1.
> bit0 at 0x4d0 is IRQ0, bit7 is IRQ7
> 0 is level
> 1 is edge
04d0: 20 0c
IRQ 7, IRQ a, IRQ b are edge?
More information about the coreboot