[coreboot] #137: S2895 no function after coreboot 2 flash
coreboot
svn at coreboot.org
Wed May 20 00:59:35 CEST 2009
#137: S2895 no function after coreboot 2 flash
--------------------------+-------------------------------------------------
Reporter: anonymous | Type: defect
Status: new | Priority: major
Milestone: | Component: buildrom
Version: v2 | Keywords:
Dependencies: | Patchstatus: there is no patch
--------------------------+-------------------------------------------------
Comment(by anonymous):
So I have have tried it again. With LZMA compression enabled, i get a rom
file thats ~500k while without i get 1M rom file. Only the 1M rom file
works with the flashrom as the chip is a 49LF080A(SST) with 1M.
So far so good. The Bios has been flashed, but no screen. The graphic card
does not initialize itself.
I need t0 arrange a pc with serial console to see whats going on.
Thanks for your help.
Tweek
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/137#comment:6>
coreboot <http://www.coreboot.org/>
More information about the coreboot
mailing list