[coreboot] #137: S2895 no function after coreboot 2 flash
coreboot
svn at coreboot.org
Wed May 20 17:13:02 CEST 2009
#137: S2895 no function after coreboot 2 flash
--------------------------+-------------------------------------------------
Reporter: anonymous | Type: defect
Status: new | Priority: major
Milestone: | Component: buildrom
Version: v2 | Keywords:
Dependencies: | Patchstatus: there is no patch
--------------------------+-------------------------------------------------
Comment(by anonymous):
The original chip that is on the S2895 is a 1M chip. (SST 49LF080A)
If you are interested i can get you a list of what chip comes on which
TYAN mainboard. (might be useful for you guys.)
I have tested with what you suggested. That did do the trick.
So i used:
cat coreboot.rom coreboot.rom >1M.rom
And now i get output on my serial console but stops at a certain point.
Here is the rest of the output on my serial console. If you need the full
log from the console, let me know.
======================================
init keyboard
i8042 ctr old=0 new=20
ps2_recvbyte timeout
i8042 ctr old=0 new=20
i8042 ctr old=0 new=20
i8042 ctr old=61 new=60
keyboard initialized
init lpt
Found 1 lpt ports
init serial
Found 1 serial ports
init mouse
e820 map has 7 items:
0: 000000000009fc00 - 00000000000a0000 = 2
1: 00000000000f0000 - 0000000000100000 = 2
2: 0910000040004000 - 5254000047004100 = 824200525
3: 000013000f130000 - 100013500f120000 = 335544321
4: ff00000000140013 - 0013001100145012 = 0
5: 0000000020000b20 - 00047f0020000b20 = 127
6: 0000000100000000 - 0000000140000000 = 1
final bios_table_addr: 0x000fb09f (used 104%)
bios_table_end_addr overflow!
--
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/137#comment:9>
coreboot <http://www.coreboot.org/>
More information about the coreboot
mailing list