[coreboot] I figured out the static problem.. But..
c-d.hailfinger.devel.2006 at gmx.net
Wed May 20 19:48:25 CEST 2009
On 20.05.2009 19:27, Joshua McDowell wrote:
> I mis-understood, I apologize..
No need to apologize. You're responsive, so I won't complain ;-)
> bash-3.00# ./flashrom -V
> flashrom v0.9.0-r535
> Found candidate at: 00000500-00000c68
> Found coreboot table at 0x00000500.
> coreboot table found at 0x500.
> coreboot header(24) checksum: 30c4 table(1896) checksum: 3619 entries: 13
> Vendor ID: Intel, part ID: SE7520JR22D
> Found chipset "Intel ICH5/ICH5R", enabling flash write...
> BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
> Unknown vendor:board from coreboot table or -m option: Intel:SE7520JR22D
It would be very interesting to get the coreboot/LinuxBIOS code for that
> Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xff, id2 0xff,
> id1 parity violation, id1 is normal flash content, id2 is normal flash
The message above means we either have an incorrect probe sequence or
the probe never reaches the chip...
> No EEPROM/flash device found.
I think you already told us which chip this is. One of us will be able
to figure out the probe sequence from the data sheet and add it to flashrom.
More information about the coreboot