[coreboot] jarrell_rom_jumper.c ( I think I found it )
Joshua McDowell
JMcDowell at ISSISolutions.com
Thu May 21 19:11:15 CEST 2009
So I ran built and then ran the program on a running node. I got the following output.
Current jumper state: Low. -- 2 to 3
I then ran flashrom with no change.
Joshua McDowell
- Lead integrator
Sent from my Blackberry
-----Original Message-----
From: Myles Watson <mylesgw at gmail.com>
Date: Thu, 21 May 2009 10:45:45
To: ron minnich<rminnich at gmail.com>
Cc: Joshua McDowell<jmcdowell at issisolutions.com>; Carl-Daniel Hailfinger<c-d.hailfinger.devel.2006 at gmx.net>; <coreboot at coreboot.org>
Subject: Re: [coreboot] jarrell_rom_jumper.c ( I think I found it )
On Thu, May 21, 2009 at 9:44 AM, ron minnich <rminnich at gmail.com> wrote:
> I think this file is the key to writing the flash. This is how we used
> to do write enables before mainboard support went into flashrom.
So the next thing for Joshua to do is compile this file and run it
before running flashrom again, right?
Thanks,
Myles
--
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
More information about the coreboot
mailing list