[coreboot] [v2] r4925 makes my linux hang

[Bao, Zheng]

The onboard was not removed because all my work have based on 4924,
which has remove the onboard. If I need try the new code, I will remove
it.


Zheng

-----Original Message-----
From: coreboot-bounces at coreboot.org
[mailto:coreboot-bounces at coreboot.org] On Behalf Of Peter Stuge
Sent: Wednesday, November 11, 2009 11:33 AM
To: coreboot at coreboot.org
Subject: Re: [coreboot] [v2] r4925 makes my linux hang

Config.lb_mahogany_k8
> chip southbridge/amd/rs780
> 	device pci 0.0 on end # HT  	0x9600
> 	device pci 1.0 on  # Internal Graphics P2P bridge 0x9602
> 		chip drivers/pci/onboard
> 			device pci 5.0 on end	# Internal Graphics
0x9615
> 			register "rom_address" = "0xfff00000"
> 		end
> 	end

I think onboard was removed, and also rom_address because CBFS can be
used to find the ROM.

I'm not sure how to best "decouple" the graphics device from the 780.


//Peter

-- 
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot