[coreboot] [PATCH]some kconfig fixes
Patrick Georgi
patrick at georgi-clan.de
Thu Sep 24 08:58:52 CEST 2009
Hi,
attached patch fixes most Kconfig boards (as tested with kbuildall).
Specifically:
- CONFIG_SMP is always set (to 'n' if MAX_CPUS==1)
- HT_CHAIN_{END,}_UNIT_BASE is defined (probably at the wrong location,
but please move it later. src/Kconfig is a good generic place to put
stuff in that should be moved, imho)
- via/c3 is hooked up to the build
- mitac and soyo boards are hooked up to the build
- emulation/qemu-x86 is "normal form" now, so kbuildall picks it up
- three via boards were missing some definitions. FALLBACK_SIZE is a
dummy until the via-specific vgabios handling code is either cleaned
up or eliminated
- RAMBASE at 0x4000 for via boards is necessary due to the via-specific
vgabios handling code. see above.
- kbuildall supports building a single board now, eg.
util/kbuildall/kbuildall emulation/qemu-x86
This is useful to quickly test changes to a board with the same
default config that kbuildall usually uses.
Signed-off-by: Patrick Georgi <patrick.georgi at coresystems.de>
Regards,
Patrick
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20090924-1-kconfig
Type: text/x-patch
Size: 11401 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090924/f10d2bf0/attachment.diff>
More information about the coreboot
mailing list