[coreboot] [PATCH] drop all copies of vgabios.c
kevin at koconnor.net
Sat Apr 24 17:28:21 CEST 2010
On Fri, Apr 23, 2010 at 11:01:34PM +0200, Stefan Reinauer wrote:
> This patch cleans up the option rom code in coreboot significantly by
> dropping all extra copies of vgabios.c and instead changing the code to
> use oprom/x86.c with custom per-board int15 handlers.
> Corey, I can't test this on cn400/cn700 ... Can you? The code should go
> in as is, but it might require some extra fixing, as (like with
> vgabios.c before) the int15 handlers are all copies of the age-old
> epia-m code. (except vx800)
If I don't enable CONFIG_VGA_ROM_RUN I get:
build/coreboot_ram.o: In function `vga_init':
vga.c:(.text+0x178d): undefined reference to `mainboard_interrupt_handlers'
If I do enable that option it will compile. I tested it on a flash image
that did not contain a valid vga rom in cbfs - it did boot, but took
00.497: Stage: loading fallback/coreboot_ram @ 0x100000 (180224 bytes), entry @ 0x100000
01.619: coreboot-4.0-r5486M Sat Apr 24 11:13:13 EDT 2010 booting...
00.501: Stage: loading fallback/coreboot_ram @ 0x4000 (163840 bytes), entry @ 0x4000
00.547: coreboot-4.0-r5486M Sat Apr 24 10:45:34 EDT 2010 rebooting...
I'm not sure if the delay is because RAMBASE moved or because of
something related to the vga code.
It's been a while since I've used coreboot's vga init code - what's
the best way to test that - filo?
More information about the coreboot