[coreboot] linker problem after menuconfig

Stefan Reinauer stefan.reinauer at coresystems.de
Sun Aug 1 17:31:46 CEST 2010

 On 8/1/10 7:13 AM, austinro at msu.edu wrote:
> Hi.
> The wiki page for seabios recommends configuring coreboot with
> When building for the jetway j7f24 target, setting those two options
> in menuconfig results in the following error (after "make"):
>     CC         cpu/intel/microcode/microcode.o
>     AR         coreboot.a
>     CC         coreboot_ram.o
>     CC         coreboot_ram
> build/coreboot_ram.o: In function `vga_init':
> vga.c:(.text+0x1968): undefined reference to
> `mainboard_interrupt_handlers'
> collect2: ld returned 1 exit status
> make: *** [build/coreboot_ram] Error 1
> With both options enabled make finishes.  I don't know much about
> kconfig, so I haven't been able to figure out where the problem is.
> Here is my .config

You also need to disable CONFIG_PCI_ROM_RUN.

The behavior here was slightly changed over time, so we probably should
fix the documentation. We should also fix the code. Compilation errors
are not so nice.


More information about the coreboot mailing list