[coreboot] DL145 G1 with dual dualcore CPU using coreboot ?

Myles Watson mylesgw at gmail.com
Mon Aug 9 20:06:56 CEST 2010

On Mon, Aug 9, 2010 at 8:16 AM, Myles Watson <mylesgw at gmail.com> wrote:
> On Sat, Aug 7, 2010 at 9:57 AM, Oskar Enoksson <enok at lysator.liu.se> wrote:
>> Ok, I'm able to hotswap the BIOS chip, burn it and hot-remove it without
>> stopping the "development server" , then moving it to the target server
>> and power it up (although it takes some effort to avoid bending the pins)
> Great.
>> However I'm not getting any output whatsoever from the target server.
>> Nothing on the serial port, nothing on the VGA output.
> Have you tested the serial port under Linux?  I'm surprised that you
> don't see anything since the board is so similar.

I wouldn't even copy the directory until you see serial output.  If
you've tested the serial port under Linux, then I would build coreboot
images for boards with the same chipsets & SuperIO until you find one
that gives you some output.


More information about the coreboot mailing list