[coreboot] [PATCH] move PHY fine tune to devicetree.cb
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Mon Aug 23 00:24:27 CEST 2010
On 22.08.2010 23:41, Patrick Georgi wrote:
> Am 22.08.2010 23:38, schrieb Stefan Reinauer:
>
>> Shouldn't such values rather go into the mainboard specific code (ie an
>> array in mainboard,c) instead of the device tree?
>>
> Depends on what we define the purpose of the registers in the devicetree
> to be.
> Some of the things we currently stuff in registers might be better put
> into CMOS ("ide or sata" decisions, for example), so that's a more
> general question than just for these values.
>
If we don't store mainboard specific settings for generic (chipset,
superio) hardware in the device tree, what settings should be in the
device tree? None?
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
More information about the coreboot
mailing list