[coreboot] Alix.2D3 / Coreboot v4 support

[Aurélien]

On Tue, Aug 24, 2010 at 7:51 AM, Patrick Georgi <patrick at georgi-clan.de>wrote:
>
> > For reviews, I attached a patch which should be applied against the
> > current coreboot [r5738] trunk. Please tell me what you think.
> Please note that for legal reasons we require contributors to sign the
> Developer's Certificate of Origin. The procedure can be found at
> http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure
>
>
>
Ok, so here it is:

 * Adds support for PC Engines Alix.2D(1)3 board to Coreboot.
 * DRAM initialization done message is now printed in debug-mode only,
rather than everytime.
---
Signed-off-by: Aurélien Guillaume <aurelien at iwi.me>

The attached patch is different from the first one (enabled secondary COM
port, since it is wired on Alix.2D13, and does not seem to impact Alix.2D3)

Notes:
 - Between Alix.2D3 and Alix.2D13, internal COM, I2C headers, USB headers
and RTC battery were added. The board is the same. I think nothing should be
changed, except perhaps enabling/disabling COM2, but it seems too complex to
be justified for now.
 - Alix.2D2 seems to be the same board with one less LAN and one more
miniPCI slot, and should be quite easy to support (just change IRQ routing),
but I have no means to test it. Does anyone own this board/is willing to
test it ?
 - Based on PC Engine's changelog, this _may_ work on Alix.2C3. Again,
anyone willing to test ?

Best regards,
-- 
Aurélien Guillaume
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100824/d28df48b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: coreboot-alix2d3-support.patch
Type: application/octet-stream
Size: 12930 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100824/d28df48b/attachment.obj>