[coreboot] Fwd: Question on switching memory stick from dimm_mask 0x01 to dimm_mask 0x10
namedylan at gmail.com
Fri Dec 10 23:14:51 CET 2010
I just want to add the serial port log file. It may help me to explain
the problem more clear.
-------- Original Message --------
Subject: Question on switching memory stick from dimm_mask 0x01 to
Date: Fri, 10 Dec 2010 15:35:11 -0500
From: Fengwei Zhang <namedylan at gmail.com>
To: coreboot at coreboot.org
For some reason, I need to switch my memory stick from dimm_mask 0x01 to
dimm_mask 0x10 on board asus m2v_mx_se.
I am using a 2G kingston DDR2 memory on board m2v_mx-se. If I put the
memory stick on board with dimm_mask 0x01. It could successfully boot
But If I put the memory stick on board with dimm_mask 0x10. Booting
process would stop at pci_scan_bus() function after print out
post_code(0x24) on the serial port.
I also tried manufacture BIOS, it could successfully boot for both
dimm_mask 0x01 and 0x10.
Does anyone has this problem before? Is there anyway to fix this?
I would appreciate your precious comments!
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
More information about the coreboot