[coreboot] Trying to build MSI 6119 coreboot BIOS
alex.buell at munted.org.uk
Tue Jun 1 17:47:36 CEST 2010
On Tue, 2010-06-01 at 15:16 +0200, Stefan Reinauer wrote:
> On 6/1/10 2:54 PM, Alex Buell wrote:
> > I've just downloaded and built SeaBIOS ready to use with CoreBoot on my
> > old MSI 6119 motherboard. Unfortunately, CoreBoot is stopping with a
> > build error in src/lib/uart8250.c with an undeclared CONFIG_TTYS0_BASE
> > error on line 83. I have checked and serial console output is definitely
> > disabled in menuconfig.
> > Any ideas why? I'm using the latest svn checkout, many thanks!
> I think disabling serial console is not supported at this point.
OK, thanks for that one, I've now built CoreBoot and flashed it onto my
MSI 6119 motherboard. Using serial console I can see the following
core-boot-4.0-r5601 Tue Jun 1 14:41:35 BST 2010 starting...
SMBus controller enabled
I have the SeaBIOS built as a payload. The strange thing is that there
seems to be no video. I'll try swapping graphic cards out and see if I
can get video.
Can the serial console be used as a way to reload firmware if necessary?
One very high maintenance cat living here.
More information about the coreboot