[coreboot] [h8dme-fam10] acquiring coreboot skills from scratch somewhat daunting
Joe Korty
joe.korty at ccur.com
Thu Jun 10 23:26:21 CEST 2010
On Thu, Jun 10, 2010 at 05:21:44PM -0400, Arne Georg Gleditsch wrote:
> Joe Korty <joe.korty at ccur.com> writes:
> > I've looked more closely; I first see a warm reset (which is normal) followed
> > by an infinite series of soft resets (which are new). Here is the first part
> > of the log, containing the warm reset and two of thesoft resets.
> >
> > Still digesting this new development, myself.....
> >
> [..]
> > raminit_amdmct()
> > raminit_amdmct begin:
> > Node: 01 base: 00 limit: 7fffff BottomIO: e00000
>
> Looks like coreboot only finds memory on node 01. Not sure if that's
> supposed to work or not, but I'd be surprised if it did. I assume you
> have memory installed on node 00 as well?
Yes I do. When I stick K8's in and compile coreboot accordingly, it all
works.
> You mentioned spd earlier,
> and this seems like a likely symptom of coreboot failing to detect the
> spd roms on socket 0. You might want to enable CONFIG_DEBUG_RAM_SETUP
> to get some more data.
I will!
Thanks,
Joe
More information about the coreboot
mailing list