[coreboot] Supermicro H8QME-2+ mct_d fatal exit.

Knut Kujat knuku at gap.upv.es
Mon Mar 1 15:14:08 CET 2010


Knut Kujat escribió:
> Peter Stuge escribió:
>   
>> Knut Kujat wrote:
>>   
>>     
>>> I haven't tried swapping CPUs or RAM. But this errors appears on
>>> memory initialization, right? So its most likely a ram issue?
>>>     
>>>       
>> The memory controller is built-in to the CPU.
>>
>> Try swapping components around and see if the problem follows some
>> particular parts.
>>
>>
>> //Peter
>>
>>   
>>     
> Hello,
>
> switching memory from a working board to the failing board worked
> "partially" because now it boots and even starts seabios but seabios
> can't find the hard drive!! It's like there isn't one installed I
> already switched HD with the working board and no result, of course
> everything works fine with vendor bios.
>
> That's odd!
>
> thx,
> Knut Kujat.
>
>   

I "solved" it. There are 3 sata cables connected to the board only 1
actually has a hard drive connected to it. Seems like this cable has to
be connected to sata 1 and before all others. Is this right? Can someone
confirm that pleas?

Bye and THX,
Knut Kujat.




More information about the coreboot mailing list