[coreboot] [commit] r5218 - trunk/src/southbridge/amd/sb700
repository service
svn at coreboot.org
Tue Mar 16 02:38:55 CET 2010
Author: zbao
Date: Tue Mar 16 02:38:54 2010
New Revision: 5218
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5218
Log:
Features supported in SB700 code:
* SATA initialization.
* USB initialization.
* HDA initialization.
* LPC initialization.
* IDE initialization.
* SMBUS initialization.
Note:
1. I tried to add the description of every step to the code. For example,
if it is made based on rpr, section 2.4.5, I will pasted the words
from 2.4.5 to the c code. But the document I worked with might be
different with the most updated one. A new section has been added and
the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I
correct every comment if I met one. But I have to confess that I am so
reluctant to find out everyone. I believe it will be correct in the long
run.
2. I only test the SATA port 0-3. The ports 4, 5 are "PATA emulations".
I am confused about it.
3. This patch is not only about SB700. Actually it should be
SB7x0. But I dont think it is nice to change everything to
SB7x0. It is ugly, isn't it. As far as I know, they all use the
same code with revision checking. If you guys think it is
appropriate, please modify it to sb7x0.
Signed-off-by: Zheng Bao <zheng.bao at amd.com>
Acked-by: Marc Jones <marcj303 at gmail.com>
Added:
trunk/src/southbridge/amd/sb700/
trunk/src/southbridge/amd/sb700/Config.lb
trunk/src/southbridge/amd/sb700/Kconfig
trunk/src/southbridge/amd/sb700/Makefile.inc
trunk/src/southbridge/amd/sb700/chip.h
trunk/src/southbridge/amd/sb700/sb700.c
trunk/src/southbridge/amd/sb700/sb700.h
trunk/src/southbridge/amd/sb700/sb700_early_setup.c
trunk/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c
trunk/src/southbridge/amd/sb700/sb700_hda.c
trunk/src/southbridge/amd/sb700/sb700_ide.c
trunk/src/southbridge/amd/sb700/sb700_lpc.c
trunk/src/southbridge/amd/sb700/sb700_pci.c
trunk/src/southbridge/amd/sb700/sb700_reset.c
trunk/src/southbridge/amd/sb700/sb700_sata.c
trunk/src/southbridge/amd/sb700/sb700_sm.c
trunk/src/southbridge/amd/sb700/sb700_smbus.c
trunk/src/southbridge/amd/sb700/sb700_smbus.h
trunk/src/southbridge/amd/sb700/sb700_usb.c
Added: trunk/src/southbridge/amd/sb700/Config.lb
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/Config.lb Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,31 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+config chip.h
+driver sb700.o
+driver sb700_usb.o
+driver sb700_lpc.o
+driver sb700_sm.o
+driver sb700_ide.o
+driver sb700_sata.o
+driver sb700_hda.o
+driver sb700_pci.o
+object sb700_reset.o
Added: trunk/src/southbridge/amd/sb700/Kconfig
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/Kconfig Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,22 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config SOUTHBRIDGE_AMD_SB700
+ bool
+ select IOAPIC
Added: trunk/src/southbridge/amd/sb700/Makefile.inc
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/Makefile.inc Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,9 @@
+driver-y += sb700.o
+driver-y += sb700_usb.o
+driver-y += sb700_lpc.o
+driver-y += sb700_sm.o
+driver-y += sb700_ide.o
+driver-y += sb700_sata.o
+driver-y += sb700_hda.o
+driver-y += sb700_pci.o
+obj-y += sb700_reset.o
Added: trunk/src/southbridge/amd/sb700/chip.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/chip.h Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB700_CHIP_H
+#define SB700_CHIP_H
+
+struct southbridge_amd_sb700_config
+{
+ u32 ide0_enable : 1;
+ u32 sata0_enable : 1;
+ u32 boot_switch_sata_ide : 1;
+ u32 hda_viddid;
+};
+struct chip_operations;
+extern struct chip_operations southbridge_amd_sb700_ops;
+
+#endif /* SB700_CHIP_H */
Added: trunk/src/southbridge/amd/sb700/sb700.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,232 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb700.h"
+
+static device_t find_sm_dev(device_t dev, u32 devfn)
+{
+ device_t sm_dev;
+
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn);
+ if (!sm_dev)
+ return sm_dev;
+
+ if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) ||
+ ((sm_dev->device != PCI_DEVICE_ID_ATI_SB700_SM))) {
+ u32 id;
+ id = pci_read_config32(sm_dev, PCI_VENDOR_ID);
+ if ((id !=
+ (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB700_SM << 16))))
+ {
+ sm_dev = 0;
+ }
+ }
+
+ return sm_dev;
+}
+
+void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(sm_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(sm_dev, reg_pos, reg);
+ }
+}
+
+static void pmio_write_index(u16 port_base, u8 reg, u8 value)
+{
+ outb(reg, port_base);
+ outb(value, port_base + 1);
+}
+
+static u8 pmio_read_index(u16 port_base, u8 reg)
+{
+ outb(reg, port_base);
+ return inb(port_base + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM_INDEX, reg, value);
+}
+
+u8 pm_ioread(u8 reg)
+{
+ return pmio_read_index(PM_INDEX, reg);
+}
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM2_INDEX, reg, value);
+}
+
+u8 pm2_ioread(u8 reg)
+{
+ return pmio_read_index(PM2_INDEX, reg);
+}
+
+static void set_pmio_enable_bits(device_t sm_dev, u32 reg_pos,
+ u32 mask, u32 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pm_ioread(reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pm_iowrite(reg_pos, reg);
+ }
+}
+
+void sb700_enable(device_t dev)
+{
+ device_t sm_dev = 0;
+ device_t bus_dev = 0;
+ int index = -1;
+ u32 deviceid;
+ u32 vendorid;
+
+ /* struct southbridge_ati_sb700_config *conf; */
+ /* conf = dev->chip_info; */
+ int i;
+
+ u32 devfn;
+
+ printk_debug("sb700_enable()\n");
+
+/*
+* 0:11.0 SATA bit 8 of sm_dev 0xac : 1 - enable, default + 32 * 3
+* 0:12.0 OHCI0-USB1 bit 0 of sm_dev 0x68
+* 0:12.1 OHCI1-USB1 bit 1 of sm_dev 0x68
+* 0:12.2 EHCI-USB1 bit 2 of sm_dev 0x68
+* 0:13.0 OHCI0-USB2 bit 4 of sm_dev 0x68
+* 0:13.1 OHCI1-USB2 bit 5 of sm_dev 0x68
+* 0:13.2 EHCI-USB2 bit 6 of sm_dev 0x68
+* 0:14.5 OHCI0-USB3 bit 7 of sm_dev 0x68
+* 0:14.0 SMBUS 0
+* 0:14.1 IDE 1
+* 0:14.2 HDA bit 3 of pm_io 0x59 : 1 - enable, default + 32 * 4
+* 0:14.3 LPC bit 20 of sm_dev 0x64 : 0 - disable, default + 32 * 1
+* 0:14.4 PCI 4
+*/
+ if (dev->device == 0x0000) {
+ vendorid = pci_read_config32(dev, PCI_VENDOR_ID);
+ deviceid = (vendorid >> 16) & 0xffff;
+ vendorid &= 0xffff;
+ } else {
+ vendorid = dev->vendor;
+ deviceid = dev->device;
+ }
+ bus_dev = dev->bus->dev;
+ if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) &&
+ (bus_dev->device == PCI_DEVICE_ID_ATI_SB700_PCI)) {
+ devfn = (bus_dev->path.pci.devfn) & ~7;
+ sm_dev = find_sm_dev(bus_dev, devfn);
+ if (!sm_dev)
+ return;
+
+ /* something under 00:01.0 */
+ switch (dev->path.pci.devfn) {
+ case 5 << 3:
+ ;
+ }
+
+ return;
+ }
+
+ i = (dev->path.pci.devfn) & ~7;
+ i += (2 << 3);
+ for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) {
+ sm_dev = find_sm_dev(dev, devfn);
+ if (sm_dev)
+ break;
+ }
+ if (!sm_dev)
+ return;
+
+ switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) {
+ case (0x11 << 3) | 0:
+ index = 8;
+ set_sm_enable_bits(sm_dev, 0xac, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 3;
+ break;
+ case (0x12 << 3) | 0:
+ case (0x12 << 3) | 1:
+ case (0x12 << 3) | 2:
+ index = dev->path.pci.devfn & 3;
+ set_sm_enable_bits(sm_dev, 0x68, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 2;
+ break;
+ case (0x13 << 3) | 0:
+ case (0x13 << 3) | 1:
+ case (0x13 << 3) | 2:
+ index = (dev->path.pci.devfn & 3) + 4;
+ set_sm_enable_bits(sm_dev, 0x68, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 2;
+ break;
+ case (0x14 << 3) | 5:
+ index = 7;
+ set_sm_enable_bits(sm_dev, 0x68, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 2;
+ break;
+ case (0x14 << 3) | 0:
+ index = 0;
+ break;
+ case (0x14 << 3) | 1:
+ index = 1;
+ break;
+ case (0x14 << 3) | 2:
+ index = 3;
+ set_pmio_enable_bits(sm_dev, 0x59, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 4;
+ break;
+ case (0x14 << 3) | 3:
+ index = 20;
+ set_sm_enable_bits(sm_dev, 0x64, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 1;
+ break;
+ case (0x14 << 3) | 4:
+ index = 4;
+ break;
+ default:
+ printk_debug("unknown dev: %s deviceid=%4x\n", dev_path(dev),
+ deviceid);
+ }
+}
+
+struct chip_operations southbridge_amd_sb700_ops = {
+ CHIP_NAME("ATI SB700")
+ .enable_dev = sb700_enable,
+};
Added: trunk/src/southbridge/amd/sb700/sb700.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700.h Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB700_H
+#define SB700_H
+
+#include <device/pci_ids.h>
+#include "chip.h"
+
+/* Power management index/data registers */
+#define PM_INDEX 0xcd6
+#define PM_DATA 0xcd7
+#define PM2_INDEX 0xcd0
+#define PM2_DATA 0xcd1
+
+extern void pm_iowrite(u8 reg, u8 value);
+extern u8 pm_ioread(u8 reg);
+extern void pm2_iowrite(u8 reg, u8 value);
+extern u8 pm2_ioread(u8 reg);
+extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val);
+
+#define REV_SB700_A11 0x11
+#define REV_SB700_A12 0x12
+#define REV_SB700_A14 0x14
+#define REV_SB700_A15 0x15
+
+/* This shouldn't be called before set_sb700_revision() is called.
+ * Once set_sb700_revision() is called, we use get_sb700_revision(),
+ * the simpler one, to get the sb700 revision ID.
+ * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15.
+ * The differentiate is 0x28, isn't it? */
+#define get_sb700_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28)
+
+void sb700_enable(device_t dev);
+
+#endif /* SB700_H */
Added: trunk/src/southbridge/amd/sb700/sb700_early_setup.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_early_setup.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,610 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SB700_EARLY_SETUP_C_
+#define _SB700_EARLY_SETUP_C_
+
+#include <arch/cpu.h>
+#include "sb700.h"
+#include "sb700_smbus.c"
+
+#define SMBUS_IO_BASE 0x6000 /* Is it a temporary SMBus I/O base address? */
+ /*SIZE 0x40 */
+
+static void pmio_write(u8 reg, u8 value)
+{
+ outb(reg, PM_INDEX);
+ outb(value, PM_INDEX + 1);
+}
+
+static u8 pmio_read(u8 reg)
+{
+ outb(reg, PM_INDEX);
+ return inb(PM_INDEX + 1);
+}
+
+/* RPR 2.28 Get SB ASIC Revision.*/
+static u8 set_sb700_revision(void)
+{
+ device_t dev;
+ u8 rev_id, enable_14Mhz, byte;
+ u8 rev = 0;
+
+ /* if (rev != 0) return rev; */
+
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\r\n");
+ /* NOT REACHED */
+ }
+ rev_id = pci_read_config8(dev, 0x08);
+
+ if (rev_id == 0x39) {
+ enable_14Mhz = (pmio_read(0x53) >> 6) & 1;
+ if (enable_14Mhz == 0x0)
+ rev = 0x11; /* A11 */
+ else if (enable_14Mhz == 0x1) {
+ /* This happens, if does, only once. So later if we need to get
+ * the rivision ID, we don't have to make such a big function.
+ * We just get reg 0x8 in smbus dev. 0x39 is A11, 0x3A is A12. */
+ rev = 0x12;
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x40, byte);
+
+ pci_write_config8(dev, 0x08, 0x3A); /* Change 0x39 to 0x3A. */
+
+ byte &= ~(1 << 0);
+ pci_write_config8(dev, 0x40, byte);
+ }
+ } else if (rev_id == 0x3A) { /* A12 will be 0x3A after BIOS is initialized */
+ rev = 0x12;
+ } else if (rev_id == 0x3C) {
+ rev = 0x14;
+ } else if (rev_id == 0x3D) {
+ rev = 0x15;
+ } else
+ die("It is not SB700 or SB710\r\n");
+
+ return rev;
+}
+
+/***************************************
+* Legacy devices are mapped to LPC space.
+* Serial port 0
+* KBC Port
+* ACPI Micro-controller port
+* LPC ROM size
+* This function does not change port 0x80 decoding.
+* Console output through any port besides 0x3f8 is unsupported.
+* If you use FWH ROMs, you have to setup IDSEL.
+***************************************/
+static void sb700_lpc_init(void)
+{
+ u8 reg8;
+ u32 reg32;
+ device_t dev;
+
+ /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!! */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */
+ reg32 = pci_read_config32(dev, 0x4C);
+ reg32 |= 1 << 31;
+ pci_write_config32(dev, 0x4C, reg32);
+
+ /* Enable lpc controller */
+ reg32 = pci_read_config32(dev, 0x64);
+ reg32 |= 1 << 20;
+ pci_write_config32(dev, 0x64, reg32);
+
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */
+ /* Decode port 0x3f8-0x3ff (Serial 0) */
+#warning Serial port decode on LPC is hardcoded to 0x3f8
+ reg8 = pci_read_config8(dev, 0x44);
+ reg8 |= 1 << 6;
+ pci_write_config8(dev, 0x44, reg8);
+
+ /* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/
+ reg8 = pci_read_config8(dev, 0x47);
+ reg8 |= (1 << 5) | (1 << 6);
+ pci_write_config8(dev, 0x47, reg8);
+
+ /* SuperIO, LPC ROM */
+ reg8 = pci_read_config8(dev, 0x48);
+ /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */
+ reg8 |= (1 << 1) | (1 << 0);
+ /* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */
+ reg8 |= (1 << 3) | (1 << 4);
+ /* Decode port 0x70-0x73 (RTC) */
+ reg8 |= 1 << 6;
+ pci_write_config8(dev, 0x48, reg8);
+
+ /* hardware should enable LPC ROM by pin straps */
+ /* ROM access at 0xFFF80000/0xFFF00000 - 0xFFFFFFFF */
+ /* See detail in 43366_sb700_bdg_nda_1.01.pdf page 17. */
+ /* enable LPC ROM range mirroring start 0x000e(0000) */
+ pci_write_config16(dev, 0x68, 0x000e);
+ /* enable LPC ROM range mirroring end 0x000f(ffff) */
+ pci_write_config16(dev, 0x6a, 0x000f);
+ /* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB */
+ pci_write_config16(dev, 0x6c, 0xfff0);
+ /* enable LPC ROM range end at 0xffff(ffff) */
+ pci_write_config16(dev, 0x6e, 0xffff);
+}
+
+/* what is its usage? */
+static u32 get_sbdn(u32 bus)
+{
+ device_t dev;
+
+ /* Find the device. */
+ dev = pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus);
+ return (dev >> 15) & 0x1f;
+}
+
+static u8 dual_core(void)
+{
+ return (pci_read_config32(PCI_DEV(0, 0x18, 3), 0xE8) & (0x3<<12)) != 0;
+}
+
+/*
+ * RPR 2.4 C-state and VID/FID change for the K8 platform.
+ */
+static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn)
+{
+ u8 byte;
+ byte = pmio_read(0x9a);
+ byte &= ~0x34;
+ if (dual_core())
+ byte |= 0x34;
+ else
+ byte |= 0x04;
+ pmio_write(0x9a, byte);
+
+ byte = pmio_read(0x8f);
+ byte &= ~0x30;
+ byte |= 0x20;
+ pmio_write(0x8f, byte);
+
+ pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesnt often happen. */
+ pmio_write(0x8a, 0x90);
+
+ pmio_write(0x88, 0x10);
+
+ byte = pmio_read(0x7c);
+ byte |= 0x03;
+ pmio_write(0x7c, byte);
+
+ /*Must be 0 for K8 platform.*/
+ byte = pmio_read(0x68);
+ byte &= ~0x01;
+ pmio_write(0x68, byte);
+ /*Must be 0 for K8 platform.*/
+ byte = pmio_read(0x8d);
+ byte &= ~(1<<6);
+ pmio_write(0x8d, byte);
+
+ byte = pmio_read(0x61);
+ byte &= ~0x04;
+ pmio_write(0x61, byte);
+
+ byte = pmio_read(0x42);
+ byte &= ~0x04;
+ pmio_write(0x42, byte);
+
+ pmio_write(0x89, 0x10);
+}
+
+static void hard_reset(void)
+{
+ set_bios_reset();
+
+ /* full reset */
+ outb(0x0a, 0x0cf9);
+ outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+ set_bios_reset();
+ /* link reset */
+ outb(0x06, 0x0cf9);
+}
+
+static void sb700_pci_port80(void)
+{
+ u8 byte;
+ device_t dev;
+
+ /* P2P Bridge */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
+
+ /* Chip Control: Enable subtractive decoding */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* The same IO Base and IO Limit here is meaningful because we set the
+ * bridge to be subtractive. During early setup stage, we have to make
+ * sure that data can go through port 0x80.
+ */
+ /* IO Base: 0xf000 */
+ byte = pci_read_config8(dev, 0x1C);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1C, byte);
+
+ /* IO Limit: 0xf000 */
+ byte = pci_read_config8(dev, 0x1D);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1D, byte);
+
+ /* PCI Command: Enable IO response */
+ byte = pci_read_config8(dev, 0x04);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x04, byte);
+
+ /* LPC controller */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+
+ byte = pci_read_config8(dev, 0x4A);
+ byte &= ~(1 << 5); /* disable lpc port 80 */
+ pci_write_config8(dev, 0x4A, byte);
+}
+
+static void sb700_lpc_port80(void)
+{
+ u8 byte;
+ device_t dev;
+ u32 reg32;
+
+ /* Enable LPC controller */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+ reg32 = pci_read_config32(dev, 0x64);
+ reg32 |= 0x00100000; /* lpcEnable */
+ pci_write_config32(dev, 0x64, reg32);
+
+ /* Enable port 80 LPC decode in pci function 3 configuration space. */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439d), 0);
+ byte = pci_read_config8(dev, 0x4a);
+ byte |= 1 << 5; /* enable port 80 */
+ pci_write_config8(dev, 0x4a, byte);
+}
+
+/* sbDevicesPorInitTable */
+static void sb700_devices_por_init(void)
+{
+ device_t dev;
+ u8 byte;
+
+ printk_info("sb700_devices_por_init()\n");
+ /* SMBus Device, BDF:0-20-0 */
+ printk_info("sb700_devices_por_init(): SMBus Device, BDF:0-20-0\n");
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\r\n");
+ /* NOT REACHED */
+ }
+ printk_info("SMBus controller enabled, sb revision is A%x\r\n",
+ set_sb700_revision());
+
+ /* sbPorAtStartOfTblCfg */
+ /* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0.
+ * This is an I/O address. The I/O address must be on 16-byte boundry. */
+ pci_write_config32(dev, 0xf0, AB_INDX);
+
+ /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */
+ /* 4.3:Enables the SB700 to send transactions upstream over A-Link Express interface. */
+ axcfg_reg(0x04, 1 << 2, 1 << 2);
+ axindxc_reg(0x21, 0xff, 0);
+
+ /* 2.5:Enabling Non-Posted Memory Write for the K8 Platform */
+ axindxc_reg(0x10, 1 << 9, 1 << 9);
+ /* END of sbPorAtStartOfTblCfg */
+
+ /* sbDevicesPorInitTables */
+ /* set smbus iobase */
+ pci_write_config32(dev, 0x90, SMBUS_IO_BASE | 1);
+
+ /* enable smbus controller interface */
+ byte = pci_read_config8(dev, 0xd2);
+ byte |= (1 << 0);
+ pci_write_config8(dev, 0xd2, byte);
+
+ /* KB2RstEnable */
+ pci_write_config8(dev, 0x40, 0x44);
+
+ /* Enable ISA Address 0-960K decoding */
+ pci_write_config8(dev, 0x48, 0x0f);
+
+ /* Enable ISA Address 0xC0000-0xDFFFF decode */
+ pci_write_config8(dev, 0x49, 0xff);
+
+ /* Enable decode cycles to IO C50, C51, C52 GPM controls. */
+ byte = pci_read_config8(dev, 0x41);
+ byte &= 0x80;
+ byte |= 0x33;
+ pci_write_config8(dev, 0x41, byte);
+
+ /* Legacy DMA Prefetch Enhancement, CIM masked it. */
+ /* pci_write_config8(dev, 0x43, 0x1); */
+
+ /* Disabling Legacy USB Fast SMI# */
+ byte = pci_read_config8(dev, 0x62);
+ byte |= 0x24;
+ pci_write_config8(dev, 0x62, byte);
+
+ /* Features Enable */
+ pci_write_config32(dev, 0x64, 0x829E79BF); /* bit10: Enables the HPET interrupt. */
+
+ /* SerialIrq Control */
+ pci_write_config8(dev, 0x69, 0x90);
+
+ /* Test Mode, PCIB_SReset_En Mask is set. */
+ pci_write_config8(dev, 0x6c, 0x20);
+
+ /* IO Address Enable, CIM set 0x78 only and masked 0x79. */
+ /*pci_write_config8(dev, 0x79, 0x4F); */
+ pci_write_config8(dev, 0x78, 0xFF);
+
+ /* Set smbus iospace enable, I don't know why write 0x04 into reg5 that is reserved */
+ pci_write_config16(dev, 0x4, 0x0407);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* IDE Device, BDF:0-20-1 */
+ printk_info("sb700_devices_por_init(): IDE Device, BDF:0-20-1\n");
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0);
+ /* Disable prefetch */
+ byte = pci_read_config8(dev, 0x63);
+ byte |= 0x1;
+ pci_write_config8(dev, 0x63, byte);
+
+ /* LPC Device, BDF:0-20-3 */
+ printk_info("sb700_devices_por_init(): LPC Device, BDF:0-20-3\n");
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ /* DMA enable */
+ pci_write_config8(dev, 0x40, 0x04);
+
+ /* IO Port Decode Enable */
+ pci_write_config8(dev, 0x44, 0xFF);
+ pci_write_config8(dev, 0x45, 0xFF);
+ pci_write_config8(dev, 0x46, 0xC3);
+ pci_write_config8(dev, 0x47, 0xFF);
+
+ /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports.
+ * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f),
+ * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65).
+ * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/
+ byte = pci_read_config8(dev, 0x48);
+ byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */
+ byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */
+ byte |= 1 << 6; /* enable for RTC I/O range */
+ pci_write_config8(dev, 0x48, byte);
+ pci_write_config8(dev, 0x49, 0xFF);
+ /* Enable 0x480-0x4bf, 0x4700-0x470B */
+ byte = pci_read_config8(dev, 0x4A);
+ byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */
+ pci_write_config8(dev, 0x4A, byte);
+
+ /* Set LPC ROM size, it has been done in sb700_lpc_init().
+ * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB;
+ * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB
+ * pci_write_config16(dev, 0x68, 0x000e)
+ * pci_write_config16(dev, 0x6c, 0xfff0);*/
+
+ /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */
+ pci_write_config8(dev, 0x7C, 0x05);
+
+ /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM,
+ */
+ printk_info("sb700_devices_por_init(): P2P Bridge, BDF:0-20-4\n");
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
+
+ /* Arbiter enable. */
+ pci_write_config8(dev, 0x43, 0xff);
+
+ /* Set PCDMA request into hight priority list. */
+ /* pci_write_config8(dev, 0x49, 0x1) */ ;
+
+ pci_write_config8(dev, 0x40, 0x26);
+
+ pci_write_config8(dev, 0x0d, 0x40);
+ pci_write_config8(dev, 0x1b, 0x40);
+ /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */
+ pci_write_config8(dev, 0x50, 0x01);
+
+ /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */
+ printk_info("sb700_devices_por_init(): SATA Device, BDF:0-18-0\n");
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0);
+
+ /*PHY Global Control*/
+ pci_write_config16(dev, 0x86, 0x2C00);
+}
+
+/* sbPmioPorInitTable, Pre-initializing PMIO register space
+* The power management (PM) block is resident in the PCI/LPC/ISA bridge.
+* The PM regs are accessed via IO mapped regs 0xcd6 and 0xcd7.
+* The index address is first programmed into IO reg 0xcd6.
+* Read or write values are accessed through IO reg 0xcd7.
+*/
+static void sb700_pmio_por_init(void)
+{
+ u8 byte;
+
+ printk_info("sb700_pmio_por_init()\n");
+ /* K8KbRstEn, KB_RST# control for K8 system. */
+ byte = pmio_read(0x66);
+ byte |= 0x20;
+ pmio_write(0x66, byte);
+
+ /* RPR2.31 PM_TURN_OFF_MSG during ASF Shutdown. */
+ if (get_sb700_revision(pci_locate_device(PCI_ID(0x1002, 0x4385), 0)) <= 0x12) {
+ byte = pmio_read(0x65);
+ byte &= ~(1 << 7);
+ pmio_write(0x65, byte);
+
+ byte = pmio_read(0x75);
+ byte &= 0xc0;
+ byte |= 0x05;
+ pmio_write(0x75, byte);
+
+ byte = pmio_read(0x52);
+ byte &= 0xc0;
+ byte |= 0x08;
+ pmio_write(0x52, byte);
+ } else {
+ byte = pmio_read(0xD7);
+ byte |= 1 << 0;
+ pmio_write(0xD7, byte);
+
+ byte = pmio_read(0x65);
+ byte |= 1 << 7;
+ pmio_write(0x65, byte);
+
+ byte = pmio_read(0x75);
+ byte &= 0xc0;
+ byte |= 0x01;
+ pmio_write(0x75, byte);
+
+ byte = pmio_read(0x52);
+ byte &= 0xc0;
+ byte |= 0x02;
+ pmio_write(0x52, byte);
+
+ }
+
+ /* Watch Dog Timer Control
+ * Set watchdog time base to 0xfec000f0 to avoid SCSI card boot failure.
+ * But I don't find WDT is enabled in SMBUS 0x41 bit3 in CIM.
+ */
+ pmio_write(0x6c, 0xf0);
+ pmio_write(0x6d, 0x00);
+ pmio_write(0x6e, 0xc0);
+ pmio_write(0x6f, 0xfe);
+
+ /* rpr2.15: Enabling Spread Spectrum */
+ byte = pmio_read(0x42);
+ byte |= 1 << 7;
+ pmio_write(0x42, byte);
+ /* TODO: Check if it is necessary. IDE reset */
+ byte = pmio_read(0xB2);
+ byte |= 1 << 0;
+ pmio_write(0xB2, byte);
+}
+
+/*
+* Add any south bridge setting.
+*/
+static void sb700_pci_cfg(void)
+{
+ device_t dev;
+ u8 byte;
+
+ /* SMBus Device, BDF:0-20-0 */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);
+ /* Enable watchdog decode timer */
+ byte = pci_read_config8(dev, 0x41);
+ byte |= (1 << 3);
+ pci_write_config8(dev, 0x41, byte);
+
+ /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles)
+ * generated PCIRST#. */
+ byte = pmio_read(0x65);
+ byte |= (1 << 4);
+ pmio_write(0x65, byte);
+
+ /* IDE Device, BDF:0-20-1 */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439C), 0);
+ /* Enable IDE Explicit prefetch, 0x63[0] clear */
+ byte = pci_read_config8(dev, 0x63);
+ byte &= 0xfe;
+ pci_write_config8(dev, 0x63, byte);
+
+ /* LPC Device, BDF:0-20-3 */
+ /* The code below is ported from old chipset. It is not
+ * metioned in RPR. But I keep them. The registers and the
+ * comments are compatible. */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ /* Enabling LPC DMA function. */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+ /* Disabling LPC TimeOut. 0x48[7] clear. */
+ byte = pci_read_config8(dev, 0x48);
+ byte &= 0x7f;
+ pci_write_config8(dev, 0x48, byte);
+ /* Disabling LPC MSI Capability, 0x78[1] clear. */
+ byte = pci_read_config8(dev, 0x78);
+ byte &= 0xfd;
+ pci_write_config8(dev, 0x78, byte);
+
+ /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */
+ dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0);
+ /* rpr7.12 SATA MSI and D3 Power State Capability. */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x40, byte);
+ if (get_sb700_revision(pci_locate_device(PCI_ID(0x1002, 0x4385), 0)) <= 0x12)
+ pci_write_config8(dev, 0x34, 0x70); /* set 0x61 to 0x70 if S1 is not supported. */
+ else
+ pci_write_config8(dev, 0x34, 0x50); /* set 0x61 to 0x50 if S1 is not supported. */
+ byte &= ~(1 << 0);
+ pci_write_config8(dev, 0x40, byte);
+}
+
+/*
+*/
+static void sb700_por_init(void)
+{
+ /* sbDevicesPorInitTable + sbK8PorInitTable */
+ sb700_devices_por_init();
+
+ /* sbPmioPorInitTable + sbK8PmioPorInitTable */
+ sb700_pmio_por_init();
+}
+
+/*
+* It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration.
+*/
+static void sb700_before_pci_init(void)
+{
+ sb700_pci_cfg();
+}
+
+/*
+* This function should be called after enable_sb700_smbus().
+*/
+static void sb700_early_setup(void)
+{
+ printk_info("sb700_early_setup()\n");
+ sb700_por_init();
+}
+
+static int smbus_read_byte(u32 device, u32 address)
+{
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+#endif
Added: trunk/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_enable_usbdebug_direct.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB700_DEVN_BASE
+
+#define SB700_DEVN_BASE 0
+
+#endif
+
+#define EHCI_BAR_INDEX 0x10
+#define EHCI_BAR 0xFEF00000
+#define EHCI_DEBUG_OFFSET 0xE0
+
+static void sb700_enable_usbdebug_direct(u32 port)
+{
+ set_debug_port(port);
+ pci_write_config32(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5),
+ EHCI_BAR_INDEX, EHCI_BAR);
+ pci_write_config8(PCI_DEV(0, SB700_DEVN_BASE + 0x13, 5), 0x04, 0x2); /* mem space enabe */
+}
Added: trunk/src/southbridge/amd/sb700/sb700_hda.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_hda.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,232 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "sb700.h"
+
+#define HDA_ICII_REG 0x68
+#define HDA_ICII_BUSY (1 << 0)
+#define HDA_ICII_VALID (1 << 1)
+
+static int set_bits(u8 * port, u32 mask, u32 val)
+{
+ u32 dword;
+ int count;
+
+ /* Write (val & ~mask) to port */
+ val &= mask;
+ dword = read32(port);
+ dword &= ~mask;
+ dword |= val;
+ write32(port, dword);
+
+ /* Wait for readback of register to
+ * match what was just written to it
+ */
+ count = 50;
+ do {
+ /* Wait 1ms based on BKDG wait time */
+ mdelay(1);
+ dword = read32(port);
+ dword &= mask;
+ } while ((dword != val) && --count);
+
+ /* Timeout occured */
+ if (!count)
+ return -1;
+ return 0;
+}
+
+static u32 codec_detect(u8 * base)
+{
+ u32 dword;
+
+ /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 0) == -1)
+ goto no_codec;
+
+ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 1) == -1)
+ goto no_codec;
+
+ /* Delay for 1 ms since the BKDG does */
+ mdelay(1);
+
+ /* Read in Codec location (BAR + 0xe)[3..0]*/
+ dword = read32(base + 0xe);
+ dword &= 0x0F;
+ if (!dword)
+ goto no_codec;
+
+ return dword;
+
+no_codec:
+ /* Codec Not found */
+ /* Put HDA back in reset (BAR + 0x8) [0] */
+ set_bits(base + 0x08, 1, 0);
+ printk_debug("No codec!\n");
+ return 0;
+}
+
+/**
+ * Wait 50usec for for the codec to indicate it is ready
+ * no response would imply that the codec is non-operative
+ */
+static int wait_for_ready(u8 *base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+
+ while(timeout--) {
+ u32 dword=read32(base + HDA_ICII_REG);
+ if (!(dword & HDA_ICII_BUSY))
+ return 0;
+ udelay(1);
+ }
+
+ return -1;
+}
+
+/**
+ * Wait 50usec for for the codec to indicate that it accepted
+ * the previous command. No response would imply that the code
+ * is non-operative
+ */
+static int wait_for_valid(u8 *base)
+{
+ /* Use a 50 usec timeout - the Linux kernel uses the
+ * same duration */
+
+ int timeout = 50;
+ while(timeout--) {
+ u32 dword = read32(base + HDA_ICII_REG);
+ if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+ HDA_ICII_VALID)
+ return 0;
+ udelay(1);
+ }
+
+ return 1;
+}
+
+static void codec_init(u8 * base, int addr)
+{
+ u32 dword;
+
+ /* 1 */
+ if (wait_for_ready(base) == -1)
+ return;
+
+ dword = (addr << 28) | 0x000f0000;
+ write32(base + 0x60, dword);
+
+ if (wait_for_valid(base) == -1)
+ return;
+
+ dword = read32(base + 0x64);
+
+ /* 2 */
+ printk_debug("%x(th) codec viddid: %08x\n", addr, dword);
+}
+
+static void codecs_init(u8 * base, u32 codec_mask)
+{
+ int i;
+ for (i = 2; i >= 0; i--) {
+ if (codec_mask & (1 << i))
+ codec_init(base, i);
+ }
+}
+
+static void hda_init(struct device *dev)
+{
+ u8 byte;
+ u32 dword;
+ u8 *base;
+ struct resource *res;
+ u32 codec_mask;
+ device_t sm_dev;
+
+ /* Enable azalia - PM_io 0x59[3], no ac97 in sb700. */
+ byte = pm_ioread(0x59);
+ byte |= 1 << 3;
+ pm_iowrite(0x59, byte);
+
+ /* Find the SMBus */
+ /* FIXME: Need to find out why the call below crashes. */
+ /*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB700_SM, 0);*/
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ /* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */
+ pci_write_config32(sm_dev, 0xf8, 0x00);
+ pci_write_config8(sm_dev, 0xfc, 0xAA);
+ /* Set INTA - SMBus 0x63 [2..0] */
+ byte = pci_read_config8(sm_dev, 0x63);
+ byte &= ~0x7;
+ byte |= 0x0; /* INTA:0x0 - INTH:0x7 */
+ pci_write_config8(sm_dev, 0x63, byte);
+
+ /* Program the 2C to 0x437b1002 */
+ dword = 0x437b1002;
+ pci_write_config32(dev, 0x2c, dword);
+
+ /* Read in BAR */
+ /* Is this right? HDA allows for a 64-bit BAR
+ * but this is only setup for a 32-bit one
+ */
+ res = find_resource(dev, 0x10);
+ if (!res)
+ return;
+
+ base = (u8 *) ((u32)res->base);
+ printk_debug("base = %p\n", base);
+ codec_mask = codec_detect(base);
+
+ if (codec_mask) {
+ printk_debug("codec_mask = %02x\n", codec_mask);
+ codecs_init(base, codec_mask);
+ }
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations hda_audio_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = hda_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver hdaaudio_driver __pci_driver = {
+ .ops = &hda_audio_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_HDA,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_ide.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_ide.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb700.h"
+
+static void ide_init(struct device *dev)
+{
+ struct southbridge_amd_sb700_config *conf;
+ /* Enable ide devices so the linux ide driver will work */
+ u32 dword;
+ u8 byte;
+
+ conf = dev->chip_info;
+
+ /* RPR9.1 disable MSI */
+ /* TODO: For A14, it should set as 1. I doubt it. */
+ dword = pci_read_config32(dev, 0x70);
+ dword &= ~(1 << 16);
+ pci_write_config32(dev, 0x70, dword);
+
+ /* Ultra DMA mode */
+ /* enable UDMA */
+ byte = pci_read_config8(dev, 0x54);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x54, byte);
+
+ /* Enable I/O Access&& Bus Master */
+ dword = pci_read_config16(dev, 0x4);
+ dword |= 1 << 2;
+ pci_write_config16(dev, 0x4, dword);
+
+ /* set ide as primary, if you want to boot from IDE, you'd better set it
+ * in mainboard/Config.lb */
+ if (conf->boot_switch_sata_ide == 1) {
+ byte = pci_read_config8(dev, 0xAD);
+ byte |= 1 << 4;
+ pci_write_config8(dev, 0xAD, byte);
+ }
+
+#if CONFIG_PCI_ROM_RUN == 1
+ pci_dev_init(dev);
+#endif
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver ide_driver __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_IDE,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_lpc.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_lpc.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,247 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pnp.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include "sb700.h"
+
+static void lpc_init(device_t dev)
+{
+ u8 byte;
+ u32 dword;
+ device_t sm_dev;
+
+ /* Enable the LPC Controller */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ dword = pci_read_config32(sm_dev, 0x64);
+ dword |= 1 << 20;
+ pci_write_config32(sm_dev, 0x64, dword);
+
+ /* Initialize isa dma */
+ isa_dma_init();
+
+ /* Enable DMA transaction on the LPC bus */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Disable the timeout mechanism on LPC */
+ byte = pci_read_config8(dev, 0x48);
+ byte &= ~(1 << 7);
+ pci_write_config8(dev, 0x48, byte);
+
+ /* Disable LPC MSI Capability */
+ byte = pci_read_config8(dev, 0x78);
+ byte &= ~(1 << 1);
+ pci_write_config8(dev, 0x78, byte);
+
+}
+
+static void sb700_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */
+
+ pci_get_resource(dev, 0xA0); /* SPI ROM base address */
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->base = 0;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->base = 0xff800000;
+ res->size = 0x00800000; /* 8 MB for flash */
+ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ res = new_resource(dev, 3); /* IOAPIC */
+ res->base = 0xfec00000;
+ res->size = 0x00001000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ compact_resources(dev);
+}
+
+static void sb700_lpc_set_resources(struct device *dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ pci_dev_set_resources(dev);
+
+ /* Specical case. SPI Base Address. The SpiRomEnable should be set. */
+ res = find_resource(dev, 0xA0);
+ pci_write_config32(dev, 0xA0, res->base | 1 << 1);
+
+}
+
+/**
+ * @brief Enable resources for children devices
+ *
+ * @param dev the device whos children's resources are to be enabled
+ *
+ * This function is call by the global enable_resources() indirectly via the
+ * device_operation::enable_resources() method of devices.
+ *
+ * Indirect mutual recursion:
+ * enable_childrens_resources() -> enable_resources()
+ * enable_resources() -> device_operation::enable_resources()
+ * device_operation::enable_resources() -> enable_children_resources()
+ */
+static void sb700_lpc_enable_childrens_resources(device_t dev)
+{
+ u32 link;
+ u32 reg, reg_x;
+ int i;
+ int var_num = 0;
+ u16 reg_var[3];
+
+ reg = pci_read_config32(dev, 0x44);
+ reg_x = pci_read_config32(dev, 0x48);
+
+ for (link = 0; link < dev->links; link++) {
+ device_t child;
+ for (child = dev->link[link].children; child;
+ child = child->sibling) {
+ enable_resources(child);
+ if (child->enabled
+ && (child->path.type == DEVICE_PATH_PNP)) {
+ for (i = 0; i < child->resources; i++) {
+ struct resource *res;
+ u32 base, end; /* don't need long long */
+ res = &child->resource[i];
+ if (!(res->flags & IORESOURCE_IO))
+ continue;
+ base = res->base;
+ end = resource_end(res);
+ printk_debug
+ ("sb700 lpc decode:%s, base=0x%08x, end=0x%08x\n",
+ dev_path(child), base, end);
+ switch (base) {
+ case 0x60: /* KB */
+ case 0x64: /* MS */
+ reg |= (1 << 29);
+ break;
+ case 0x3f8: /* COM1 */
+ reg |= (1 << 6);
+ break;
+ case 0x2f8: /* COM2 */
+ reg |= (1 << 7);
+ break;
+ case 0x378: /* Parallal 1 */
+ reg |= (1 << 0);
+ break;
+ case 0x3f0: /* FD0 */
+ reg |= (1 << 26);
+ break;
+ case 0x220: /* Aduio 0 */
+ reg |= (1 << 8);
+ break;
+ case 0x300: /* Midi 0 */
+ reg |= (1 << 18);
+ break;
+ case 0x400:
+ reg_x |= (1 << 16);
+ break;
+ case 0x480:
+ reg_x |= (1 << 17);
+ break;
+ case 0x500:
+ reg_x |= (1 << 18);
+ break;
+ case 0x580:
+ reg_x |= (1 << 19);
+ break;
+ case 0x4700:
+ reg_x |= (1 << 22);
+ break;
+ case 0xfd60:
+ reg_x |= (1 << 23);
+ break;
+ default:
+ if (var_num >= 3)
+ continue; /* only 3 var ; compact them ? */
+ switch (var_num) {
+ case 0:
+ reg_x |= (1 << 2);
+ break;
+ case 1:
+ reg_x |= (1 << 24);
+ break;
+ case 2:
+ reg_x |= (1 << 25);
+ break;
+ }
+ reg_var[var_num++] =
+ base & 0xffff;
+ }
+ }
+ }
+ }
+ }
+ pci_write_config32(dev, 0x44, reg);
+ pci_write_config32(dev, 0x48, reg_x);
+ /* Set WideIO for as many IOs found (fall through is on purpose) */
+ switch (var_num) {
+ case 2:
+ pci_write_config16(dev, 0x90, reg_var[2]);
+ case 1:
+ pci_write_config16(dev, 0x66, reg_var[1]);
+ case 0:
+ pci_write_config16(dev, 0x64, reg_var[0]);
+ break;
+ }
+}
+
+static void sb700_lpc_enable_resources(device_t dev)
+{
+ pci_dev_enable_resources(dev);
+ sb700_lpc_enable_childrens_resources(dev);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations lpc_ops = {
+ .read_resources = sb700_lpc_read_resources,
+ .set_resources = sb700_lpc_set_resources,
+ .enable_resources = sb700_lpc_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &lops_pci,
+};
+static struct pci_driver lpc_driver __pci_driver = {
+ .ops = &lpc_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_LPC,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_pci.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_pci.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,128 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb700.h"
+
+static void pci_init(struct device *dev)
+{
+ u32 dword;
+ u16 word;
+ u8 byte;
+
+ /* RPR 5.1 Enables the PCI-bridge subtractive decode */
+ /* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* RPR5.2 PCI-bridge upstream dual address window */
+ /* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */
+ byte = pci_read_config8(dev, 0x50);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x50, byte);
+
+ /* RPR 5.3 PCI bus 64-byte DMA read access */
+ /* Enhance the PCI bus DMA performance */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 4;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* RPR 5.4 Enables the PCIB writes to be cacheline aligned. */
+ /* The size of the writes will be set in the Cacheline Register */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 1;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* RPR 5.5 Enables the PCIB to retain ownership of the bus on the Primary side and on the Secondary side when GNT# is deasserted */
+ pci_write_config8(dev, 0x0D, 0x40);
+ pci_write_config8(dev, 0x1B, 0x40);
+
+ /* RPR 5.6 Enable the command matching checking function on "Memory Read" & "Memory Read Line" commands */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 6;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* RPR 5.7 When enabled, the PCI arbiter checks for the Bus Idle before asserting GNT# */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* RPR 5.8 Adjusts the GNT# de-assertion time */
+ word = pci_read_config16(dev, 0x64);
+ word |= 1 << 12;
+ pci_write_config16(dev, 0x64, word);
+
+ /* RPR 5.9 Fast Back to Back transactions support */
+ byte = pci_read_config8(dev, 0x48);
+ byte |= 1 << 2;
+ /* pci_write_config8(dev, 0x48, byte); */
+
+ /* RPR 5.10 Enable Lock Operation */
+ /* byte = pci_read_config8(dev, 0x48); */
+ byte |= 1 << 3;
+ pci_write_config8(dev, 0x48, byte);
+
+ /* RPR 5.11 Enable additional optional PCI clock */
+ word = pci_read_config16(dev, 0x64);
+ word |= 1 << 8;
+ pci_write_config16(dev, 0x64, word);
+
+ /* RPR 5.12 Enable One-Prefetch-Channel Mode */
+ dword = pci_read_config32(dev, 0x64);
+ dword |= 1 << 20;
+ pci_write_config32(dev, 0x64, dword);
+
+ /* RPR 5.13 Disable PCIB MSI Capability */
+ byte = pci_read_config8(dev, 0x40);
+ byte &= ~(1 << 3);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* rpr5.14 Adjusting CLKRUN# */
+ dword = pci_read_config32(dev, 0x64);
+ dword |= (1 << 15);
+ pci_write_config32(dev, 0x64, dword);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pci_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .reset_bus = pci_bus_reset,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver pci_driver __pci_driver = {
+ .ops = &pci_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_PCI,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_reset.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_reset.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+
+#define PCI_DEV(BUS, DEV, FN) ( \
+ (((BUS) & 0xFFF) << 20) | \
+ (((DEV) & 0x1F) << 15) | \
+ (((FN) & 0x7) << 12))
+
+typedef u32 device_t;
+
+static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
+{
+ unsigned addr;
+ addr = (dev>>4) | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outb(value, 0xCFC + (addr & 3));
+}
+
+static void pci_write_config32(device_t dev, unsigned where, unsigned value)
+{
+ unsigned addr;
+ addr = (dev>>4) | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+static unsigned pci_read_config32(device_t dev, unsigned where)
+{
+ unsigned addr;
+ addr = (dev>>4) | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ return inl(0xCFC);
+}
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+ set_bios_reset();
+ /* Try rebooting through port 0xcf9 */
+ /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+ outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+ outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
Added: trunk/src/southbridge/amd/sb700/sb700_sata.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_sata.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,291 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <delay.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "sb700.h"
+
+int sata_drive_detect(int portnum, u16 iobar)
+{
+ u8 byte, byte2;
+ int i = 0;
+ outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6);
+ while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7),
+ (byte != (0xA0 + 0x10 * (portnum % 2))) ||
+ ((byte2 & 0x88) != 0)) {
+ printk_spew("0x6=%x, 0x7=%x\n", byte, byte2);
+ if (byte != (0xA0 + 0x10 * (portnum % 2))) {
+ /* This will happen at the first iteration of this loop
+ * if the first SATA port is unpopulated and the
+ * second SATA port is poulated.
+ */
+ printk_debug("drive no longer selected after %i ms, "
+ "retrying init\n", i * 10);
+ return 1;
+ } else
+ printk_spew("drive detection not yet completed, "
+ "waiting...\n");
+ mdelay(10);
+ i++;
+ }
+ printk_spew("drive detection done after %i ms\n", i * 10);
+ return 0;
+}
+
+static void sata_init(struct device *dev)
+{
+ u8 byte;
+ u16 word;
+ u32 dword;
+ u8 rev_id;
+ u8 *sata_bar5;
+ u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
+ int i, j;
+
+ struct southbridge_ati_sb700_config *conf;
+ conf = dev->chip_info;
+
+ device_t sm_dev;
+ /* SATA SMBus Disable */
+ /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ /* Disable SATA SMBUS */
+ byte = pci_read_config8(sm_dev, 0xad);
+ byte |= (1 << 1);
+ /* Enable SATA and power saving */
+ byte = pci_read_config8(sm_dev, 0xad);
+ byte |= (1 << 0);
+ byte |= (1 << 5);
+ pci_write_config8(sm_dev, 0xad, byte);
+
+ /* RPR 7.2 SATA Initialization */
+ /* Set the interrupt Mapping to INTG# */
+ byte = pci_read_config8(sm_dev, 0xaf);
+ byte = 0x6 << 2;
+ pci_write_config8(sm_dev, 0xaf, byte);
+
+ /* get rev_id */
+ rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
+
+ /* get base addresss */
+ sata_bar5 = (u8 *) (pci_read_config32(dev, 0x24) & ~0x3FF);
+ sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
+ sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
+ sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
+ sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3;
+ sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;
+
+ printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */
+ printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */
+ printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */
+ printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */
+ printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */
+ printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */
+
+ /* disable combined mode */
+ byte = pci_read_config8(sm_dev, 0xAD);
+ byte &= ~(1 << 3);
+ pci_write_config8(sm_dev, 0xAD, byte);
+ /* Program the 2C to 0x43801002 */
+ dword = 0x43801002;
+ pci_write_config32(dev, 0x2c, dword);
+
+ /* SERR-Enable */
+ word = pci_read_config16(dev, 0x04);
+ word |= (1 << 8);
+ pci_write_config16(dev, 0x04, word);
+
+ /* Dynamic power saving */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 2);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Set SATA Operation Mode, Set to IDE mode */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= (1 << 0);
+ byte |= (1 << 4);
+ pci_write_config8(dev, 0x40, byte);
+
+ dword = 0x01018f00;
+ pci_write_config32(dev, 0x8, dword);
+
+ byte = pci_read_config8(dev, 0x40);
+ byte &= ~(1 << 0);
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Enable the SATA watchdog counter */
+ byte = pci_read_config8(dev, 0x44);
+ byte |= (1 << 0);
+ pci_write_config8(dev, 0x44, byte);
+
+ /* Set bit 29 and 24 for A12 */
+ dword = pci_read_config32(dev, 0x40);
+ if (rev_id < 0x14) /* before A12 */
+ dword |= (1 << 29);
+ else
+ dword &= ~(1 << 29); /* A14 and above */
+ pci_write_config32(dev, 0x40, dword);
+
+ /* set bit 21 for A12 */
+ dword = pci_read_config32(dev, 0x48);
+ if (rev_id < 0x14) /* before A12 */
+ dword |= 1 << 24 | 1 << 21;
+ else {
+ dword &= ~(1 << 24 | 1 << 21); /* A14 and above */
+ dword &= ~0xFF80; /* 15:7 */
+ dword |= 1 << 15 | 0x7F << 7;
+ }
+ pci_write_config32(dev, 0x48, dword);
+
+ /* Program the watchdog counter to 0x10 */
+ byte = 0x10;
+ pci_write_config8(dev, 0x46, byte);
+
+ /* RPR7.6.1 Program the PHY Global Control to 0x2C00 */
+ word = 0x2c00;
+ pci_write_config16(dev, 0x86, word);
+
+ /* RPR7.6.2 SATA GENI PHY ports setting */
+ pci_write_config32(dev, 0x88, 0x01B48017);
+ pci_write_config32(dev, 0x8c, 0x01B48019);
+ pci_write_config32(dev, 0x90, 0x01B48016);
+ pci_write_config32(dev, 0x94, 0x01B48016);
+ pci_write_config32(dev, 0x98, 0x01B48016);
+ pci_write_config32(dev, 0x9C, 0x01B48016);
+
+ /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */
+ pci_write_config16(dev, 0xA0, 0xA09A);
+ pci_write_config16(dev, 0xA2, 0xA09F);
+ pci_write_config16(dev, 0xA4, 0xA07A);
+ pci_write_config16(dev, 0xA6, 0xA07A);
+ pci_write_config16(dev, 0xA8, 0xA07A);
+ pci_write_config16(dev, 0xAA, 0xA07A);
+
+ /* Enable the I/O, MM, BusMaster access for SATA */
+ byte = pci_read_config8(dev, 0x4);
+ byte |= 7 << 0;
+ pci_write_config8(dev, 0x4, byte);
+
+ /* RPR7.7 SATA drive detection. */
+ /* Use BAR5+0x128,BAR0 for Primary Slave */
+ /* Use BAR5+0x1A8,BAR0 for Primary Slave */
+ /* Use BAR5+0x228,BAR2 for Secondary Master */
+ /* Use BAR5+0x2A8,BAR2 for Secondary Slave */
+ /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */
+ /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
+
+ /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */
+
+ for (i = 0; i < 4; i++) {
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+ printk_spew("SATA port %i status = %x\n", i, byte);
+ byte &= 0xF;
+ if( byte == 0x1 ) {
+ /* If the drive status is 0x1 then we see it but we aren't talking to it. */
+ /* Try to do something about it. */
+ printk_spew("SATA device detected but not talking. Trying lower speed.\n");
+
+ /* Read in Port-N Serial ATA Control Register */
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
+
+ /* Set Reset Bit and 1.5g bit */
+ byte |= 0x11;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Clear Reset Bit */
+ byte &= ~0x01;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Reread status */
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+ printk_spew("SATA port %i status = %x\n", i, byte);
+ byte &= 0xF;
+ }
+
+ if (byte == 0x3) {
+ for (j = 0; j < 10; j++) {
+ if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2))
+ break;
+ }
+ printk_debug("%s %s device is %sready after %i tries\n",
+ (i / 2) ? "Secondary" : "Primary",
+ (i % 2 ) ? "Slave" : "Master",
+ (j == 10) ? "not " : "",
+ (j == 10) ? j : j + 1);
+ } else {
+ printk_debug("No %s %s SATA drive on Slot%i\n",
+ (i / 2) ? "Secondary" : "Primary",
+ (i % 2 ) ? "Slave" : "Master", i);
+ }
+ }
+
+ /* Below is CIM InitSataLateFar */
+ /* Enable interrupts from the HBA */
+ byte = read8(sata_bar5 + 0x4);
+ byte |= 1 << 1;
+ write8((sata_bar5 + 0x4), byte);
+
+ /* Clear error status */
+ write32((sata_bar5 + 0x130), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x230), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x330), 0xFFFFFFFF);
+ write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
+
+ /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
+ /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
+
+ /* word = 0x0000; */
+ /* word = pm_ioread(0x28); */
+ /* byte = pm_ioread(0x29); */
+ /* word |= byte<<8; */
+ /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */
+ /* write32(word, 0x80000000); */
+}
+
+static struct pci_operations lops_pci = {
+ /* .set_subsystem = pci_dev_set_subsystem, */
+};
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver sata0_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_SATA,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_sm.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_sm.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,381 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <pc80/mc146818rtc.h>
+#include <bitops.h>
+#include <arch/io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/ioapic.h>
+#include <stdlib.h>
+#include "sb700.h"
+#include "sb700_smbus.c"
+
+#define NMI_OFF 0
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
+#endif
+
+/*
+* SB700 enables all USB controllers by default in SMBUS Control.
+* SB700 enables SATA by default in SMBUS Control.
+*/
+static void sm_init(device_t dev)
+{
+ u8 byte;
+ u8 byte_old;
+ u32 dword;
+ u32 ioapic_base;
+ u32 on;
+ u32 nmi_option;
+
+ printk_info("sm_init().\n");
+
+ ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */
+ /* Don't rename APIC ID */
+ /* TODO: We should call setup_ioapic() here. But kernel hangs if cpu is K8.
+ * We need to check out why and change back. */
+ clear_ioapic(ioapic_base);
+
+ /* 2.10 Interrupt Routing/Filtering */
+ dword = pci_read_config8(dev, 0x62);
+ dword |= 3;
+ pci_write_config8(dev, 0x62, dword);
+
+ /* Delay back to back interrupts to the CPU. */
+ dword = pci_read_config16(dev, 0x64);
+ dword |= 1 << 13;
+ pci_write_config16(dev, 0x64, dword);
+
+
+ /* rrg:K8 INTR Enable (BIOS should set this bit after PIC initialization) */
+ /* rpr 2.1 Enabling Legacy Interrupt */
+ dword = pci_read_config8(dev, 0x62);
+ dword |= 1 << 2;
+ pci_write_config8(dev, 0x62, dword);
+
+ dword = pci_read_config32(dev, 0x78);
+ dword |= 1 << 9;
+ pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */
+
+ /* bit 10: MultiMediaTimerIrqEn */
+ dword = pci_read_config8(dev, 0x64);
+ dword |= 1 << 10;
+ pci_write_config8(dev, 0x64, dword);
+ /* enable serial irq */
+ byte = pci_read_config8(dev, 0x69);
+ byte |= 1 << 7; /* enable serial irq function */
+ byte &= ~(0xF << 2);
+ byte |= 4 << 2; /* set NumSerIrqBits=4 */
+ pci_write_config8(dev, 0x69, byte);
+
+ /* IRQ0From8254 */
+ byte = pci_read_config8(dev, 0x41);
+ byte &= ~(1 << 7);
+ pci_write_config8(dev, 0x41, byte);
+
+ byte = pm_ioread(0x61);
+ byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */
+ pm_iowrite(0x61, byte);
+
+ /* disable SMI */
+ byte = pm_ioread(0x53);
+ byte |= 1 << 3;
+ pm_iowrite(0x53, byte);
+
+ /* power after power fail */
+ on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ get_option(&on, "power_on_after_fail");
+ byte = pm_ioread(0x74);
+ byte &= ~0x03;
+ if (on) {
+ byte |= 2;
+ }
+ byte |= 1 << 2;
+ pm_iowrite(0x74, byte);
+ printk_info("set power %s after power fail\n", on ? "on" : "off");
+
+ byte = pm_ioread(0x68);
+ byte &= ~(1 << 1);
+ /* 2.7 */
+ byte |= 1 << 2;
+ pm_iowrite(0x68, byte);
+
+ /* 2.7 */
+ byte = pm_ioread(0x65);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x65, byte);
+
+ /* 2.16 */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 5;
+ pm_iowrite(0x55, byte);
+
+ byte = pm_ioread(0xD7);
+ byte |= 1 << 6 | 1 << 1;;
+ pm_iowrite(0xD7, byte);
+
+ /* 2.15 */
+ byte = pm_ioread(0x42);
+ byte &= ~(1 << 2);
+ pm_iowrite(0x42, byte);
+
+ /* Set up NMI on errors */
+ byte = inb(0x70); /* RTC70 */
+ byte_old = byte;
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ byte &= ~(1 << 7); /* set NMI */
+ printk_info("++++++++++set NMI+++++\n");
+ } else {
+ byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */
+ printk_info("++++++++++no set NMI+++++\n");
+ }
+ byte &= ~(1 << 7);
+ if (byte != byte_old) {
+ outb(byte, 0x70);
+ }
+
+ /* 2.11 IO Trap Settings */
+ abcfg_reg(0x10090, 1 << 16, 1 << 16);
+
+ /* ab index */
+ pci_write_config32(dev, 0xF0, AB_INDX);
+ /* Initialize the real time clock */
+ rtc_init(0);
+
+ /* 4.3 Enabling Upstream DMA Access */
+ axcfg_reg(0x04, 1 << 2, 1 << 2);
+ /* 4.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */
+ abcfg_reg(0x10060, 9 << 17, 9 << 17);
+ abcfg_reg(0x10064, 9 << 17, 9 << 17);
+
+ /* 4.5 Enabling OHCI Prefetch for Performance Enhancement, A12 */
+ abcfg_reg(0x80, 1 << 0, 1<< 0);
+
+ /* 4.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */
+ /* 4.7 Enabling Additional Address Bits Checking in Downstream */
+ /* 4.15 IO write and SMI ordering enhancement*/
+ abcfg_reg(0x9c, 3 << 0 | 1 << 8, 3 << 0 | 1 << 8);
+
+ /* 4.8 Set B-Link Prefetch Mode */
+ abcfg_reg(0x80, 3 << 17, 3 << 17);
+
+ /* 4.9 Enabling Detection of Upstream Interrupts */
+ abcfg_reg(0x94, 1 << 20 | 0x7FFFF, 1 << 20 | 0x00FEE);
+
+ /* 4.10: Enabling Downstream Posted Transactions to Pass Non-Posted
+ * Transactions for the K8 Platform (for All Revisions) */
+ abcfg_reg(0x10090, 1 << 8, 1 << 8);
+
+ /* 4.11:Programming Cycle Delay for AB and BIF Clock Gating */
+ /* 4.12: Enabling AB and BIF Clock Gating */
+ abcfg_reg(0x10054, 0xFFFF0000, 0x1040000);
+ abcfg_reg(0x54, 0xFF << 16, 4 << 16);
+ abcfg_reg(0x54, 1 << 24, 0 << 24);
+ abcfg_reg(0x98, 0x0000FF00, 0x00004700);
+
+ /* 4.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */
+ abcfg_reg(0x10054, 0x0000FFFF, 0x07FF);
+
+ /* 4.14:Enabling Requester ID for upstream traffic. */
+ abcfg_reg(0x98, 1 << 16, 1 << 16);
+
+ /* 9.2: Enableing IDE Data Bus DD7 Pull Down Resistor */
+ byte = pm2_ioread(0xE5);
+ byte |= 1 << 2;
+ pm2_iowrite(0xE5, byte);
+
+ /* Enable IDE controller. */
+ byte = pm_ioread(0x59);
+ byte &= ~(1 << 1);
+ pm_iowrite(0x59, byte);
+
+ printk_info("sm_init() end\n");
+
+ /* Enable NbSb virtual channel */
+ axcfg_reg(0x114, 0x3f << 1, 0 << 1);
+ axcfg_reg(0x120, 0x7f << 1, 0x7f << 1);
+ axcfg_reg(0x120, 7 << 24, 1 << 24);
+ axcfg_reg(0x120, 1 << 31, 1 << 31);
+ abcfg_reg(0x50, 1 << 3, 1 << 3);
+}
+
+static int lsmbus_recv_byte(device_t dev)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_recv_byte(res->base, device);
+}
+
+static int lsmbus_send_byte(device_t dev, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_send_byte(res->base, device, val);
+}
+
+static int lsmbus_read_byte(device_t dev, u8 address)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static int lsmbus_write_byte(device_t dev, u8 address, u8 val)
+{
+ u32 device;
+ struct resource *res;
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+
+ res = find_resource(pbus->dev, 0x90);
+
+ return do_smbus_write_byte(res->base, device, address, val);
+}
+static struct smbus_bus_operations lops_smbus_bus = {
+ .recv_byte = lsmbus_recv_byte,
+ .send_byte = lsmbus_send_byte,
+ .read_byte = lsmbus_read_byte,
+ .write_byte = lsmbus_write_byte,
+};
+
+static void sb700_sm_read_resources(device_t dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */
+ byte = pm_ioread(0x55);
+ byte |= 1 << 7;
+ pm_iowrite(0x55, byte);
+
+ /* Get the normal pci resources of this device */
+ /* pci_dev_read_resources(dev); */
+
+ byte = pm_ioread(0x55);
+ byte &= ~(1 << 7);
+ pm_iowrite(0x55, byte);
+
+ /* apic */
+ res = new_resource(dev, 0x74);
+ res->base = 0xfec00000;
+ res->size = 256 * 0x10;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+
+ #if 0 /* Linux ACPI crashes when it is 1. For late debugging. */
+ res = new_resource(dev, 0x14); /* TODO: hpet */
+ res->base = 0xfed00000; /* reset hpet to widely accepted address */
+ res->size = 0x400;
+ res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+ #endif
+ /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
+
+ /* smbus */
+ res = new_resource(dev, 0x90);
+ res->base = 0xB00;
+ res->size = 0x10;
+ res->limit = 0xFFFFUL; /* res->base + res->size -1; */
+ res->align = 8;
+ res->gran = 8;
+ res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
+
+
+ compact_resources(dev);
+
+}
+static void sb700_sm_set_resources(struct device *dev)
+{
+ struct resource *res;
+ u8 byte;
+
+ pci_dev_set_resources(dev);
+
+
+ /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */
+ byte = pm_ioread(0x52);
+ byte |= 1 << 6;
+ pm_iowrite(0x52, byte);
+
+ res = find_resource(dev, 0x74);
+ pci_write_config32(dev, 0x74, res->base | 1 << 3);
+#if 0 /* TODO:hpet */
+ res = find_resource(dev, 0x14);
+ pci_write_config32(dev, 0x14, res->base);
+#endif
+ res = find_resource(dev, 0x90);
+ pci_write_config32(dev, 0x90, res->base | 1);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = sb700_sm_read_resources,
+ .set_resources = sb700_sm_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sm_init,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+static struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_SM,
+};
Added: trunk/src/southbridge/amd/sb700/sb700_smbus.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_smbus.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,228 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _SB700_SMBUS_C_
+#define _SB700_SMBUS_C_
+
+#include "sb700_smbus.h"
+
+static inline void smbus_delay(void)
+{
+ outb(inb(0x80), 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f;
+ if (val == 0) { /* ready now */
+ return 0;
+ }
+ outb(val, smbus_io_base + SMBHSTSTAT);
+ } while (--loops);
+ return -2; /* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+ u32 loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ u8 val;
+
+ val = inb(smbus_io_base + SMBHSTSTAT);
+ val &= 0x1f; /* mask off reserved bits */
+ if (val & 0x1c) {
+ return -5; /* error */
+ }
+ if (val == 0x02) {
+ outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */
+ return 0;
+ }
+ } while (--loops);
+ return -3; /* timeout */
+}
+
+static int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTCMD);
+
+ return byte;
+}
+
+static int do_smbus_send_byte(u32 smbus_io_base, u32 device,
+ u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command... */
+ outb(val, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+ u32 address)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT0);
+
+ return byte;
+}
+
+int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+ u32 address, u8 val)
+{
+ u8 byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2; /* not ready */
+ }
+
+ /* set the command/address... */
+ outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+ /* output value */
+ outb(val, smbus_io_base + SMBHSTDAT0);
+
+ byte = inb(smbus_io_base + SMBHSTCTRL);
+ byte &= 0xe3; /* Clear [4:2] */
+ byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */
+ outb(byte, smbus_io_base + SMBHSTCTRL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3; /* timeout or error */
+ }
+
+ return 0;
+}
+
+static void alink_ab_indx(u32 reg_space, u32 reg_addr,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
+ tmp = inl(AB_DATA);
+ /* rpr 4.2
+ * For certain revisions of the chip, the ABCFG registers,
+ * with an address of 0x100NN (where 'N' is any hexadecimal
+ * number), require an extra programming step.*/
+ reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* printk_debug("about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
+ outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */
+ outl(tmp, AB_DATA);
+ reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+static void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+ u32 mask, u32 val)
+{
+ u32 tmp;
+
+ /* read axindc to tmp */
+ outl(space << 30 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(space << 30 | space << 3 | 0x34, AB_INDX);
+ tmp = inl(AB_DATA);
+
+ tmp &= ~mask;
+ tmp |= val;
+
+ /* write tmp */
+ outl(space << 30 | space << 3 | 0x30, AB_INDX);
+ outl(axindc, AB_DATA);
+ outl(space << 30 | space << 3 | 0x34, AB_INDX);
+ outl(tmp, AB_DATA);
+}
+#endif
Added: trunk/src/southbridge/amd/sb700/sb700_smbus.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_smbus.h Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SB700_SMBUS_H
+#define SB700_SMBUS_H
+
+//#include <stdint.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBSLVSTAT 0x1
+#define SMBHSTCTRL 0x2
+#define SMBHSTCMD 0x3
+#define SMBHSTADDR 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBHSTBLKDAT 0x7
+
+#define SMBSLVCTRL 0x8
+#define SMBSLVCMD_SHADOW 0x9
+#define SMBSLVEVT 0xa
+#define SMBSLVDAT 0xc
+
+#define AX_INDXC 0
+#define AX_INDXP 1
+#define AXCFG 2
+#define ABCFG 3
+
+#define AB_INDX 0xCD8
+#define AB_DATA (AB_INDX+4)
+
+/* Between 1-10 seconds, We should never timeout normally
+ * Longer than this is just painful when a timeout condition occurs.
+ */
+#define SMBUS_TIMEOUT (100*1000*10)
+
+#define abcfg_reg(reg, mask, val) \
+ alink_ab_indx((ABCFG), (reg), (mask), (val))
+#define axcfg_reg(reg, mask, val) \
+ alink_ab_indx((AXCFG), (reg), (mask), (val))
+#define axindxc_reg(reg, mask, val) \
+ alink_ax_indx(0, (reg), (mask), (val))
+#define axindxp_reg(reg, mask, val) \
+ alink_ax_indx(1, (reg), (mask), (val))
+
+
+#endif
Added: trunk/src/southbridge/amd/sb700/sb700_usb.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/southbridge/amd/sb700/sb700_usb.c Tue Mar 16 02:38:54 2010 (r5218)
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <usbdebug_direct.h>
+#include <arch/io.h>
+#include "sb700.h"
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static void usb_init(struct device *dev)
+{
+ u8 byte;
+ u16 word;
+ u32 dword;
+
+ /* 6.1 Enable OHCI0-4 and EHCI Controllers */
+ device_t sm_dev;
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ byte = pci_read_config8(sm_dev, 0x68);
+ byte |= 0xFF;
+ pci_write_config8(sm_dev, 0x68, byte);
+
+
+ /* RPR 6.2 Enables the USB PME Event,Enable USB resume support */
+ byte = pm_ioread(0x61);
+ byte |= 1 << 6;
+ pm_iowrite(0x61, byte);
+ byte = pm_ioread(0x65);
+ byte |= 1 << 2;
+ pm_iowrite(0x65, byte);
+
+ /* RPR 6.3 Support USB device wakeup from the S4/S5 state */
+ byte = pm_ioread(0x65);
+ byte &= ~(1 << 0);
+ pm_iowrite(0x65, byte);
+
+ /* RPR 6.5 Enable the USB controller to get reset by any software that generate a PCIRst# condition */
+ byte = pm_ioread(0x65);
+ byte |= (1 << 4);
+ pm_iowrite(0x65, byte);
+
+ /* RPR 6.10 Disable OHCI MSI Capability. */
+ word = pci_read_config16(dev, 0x40);
+ word |= (0x3 << 8);
+ pci_write_config16(dev, 0x40, word);
+}
+
+static void usb_init2(struct device *dev)
+{
+ u8 byte;
+ u16 word;
+ u32 dword;
+ u8 *usb2_bar0;
+ device_t sm_dev;
+ u8 rev;
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ rev = get_sb700_revision(sm_dev);
+
+ /* dword = pci_read_config32(dev, 0xf8); */
+ /* dword |= 40; */
+ /* pci_write_config32(dev, 0xf8, dword); */
+
+ usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF);
+ printk_info("usb2_bar0=%p\n", usb2_bar0);
+
+ /* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
+ dword = 0x00020F00;
+ write32(usb2_bar0 + 0xC0, dword);
+
+ /* RPR6.9 Sets In/OUT FIFO threshold for best performance */
+ dword = 0x00400040;
+ write32(usb2_bar0 + 0xA4, dword);
+
+ /* RPR6.11 Disabling EHCI Advance Asynchronous Enhancement */
+ dword = pci_read_config32(dev, 0x50);
+ dword |= (1 << 28);
+ pci_write_config32(dev, 0x50, dword);
+
+ /* RPR 6.12 EHCI Advance PHY Power Savings */
+ /* RPR says it is just for A12. CIMM sets it when it is above A11. */
+ /* But it makes the linux crash, so we skip it */
+ #if 0
+ dword = pci_read_config32(dev, 0x50);
+ dword |= 1 << 31;
+ pci_write_config32(dev, 0x50, dword);
+ #endif
+
+ /* RPR6.13 Enabling Fix for EHCI Controller Dirver Yellow Sign Issue */
+ /* RPR says it is just for A12. CIMM sets it when it is above A11. */
+ dword = pci_read_config32(dev, 0x50);
+ dword |= (1 << 20);
+ pci_write_config32(dev, 0x50, dword);
+
+ /* RPR6.15 EHCI Async Park Mode */
+ dword = pci_read_config32(dev, 0x50);
+ dword |= (1 << 23);
+ pci_write_config32(dev, 0x50, dword);
+
+ /* Each step below causes the linux crashes. Leave them here
+ * for future debugging. */
+#if 0
+ /* RPR6.16 Disable EHCI MSI support */
+ byte = pci_read_config8(dev, 0x50);
+ byte |= (1 << 6);
+ pci_write_config8(dev, 0x50, byte);
+
+ /* RPR6.17 Disable the EHCI Dynamic Power Saving feature */
+ word = read32(usb2_bar0 + 0xBC);
+ word &= ~(1 << 12);
+ write16(usb2_bar0 + 0xBC, word);
+
+ /* RPR6.19 USB Controller DMA Read Delay Tolerant. */
+ if (rev >= REV_SB700_A14) {
+ byte = pci_read_config8(dev, 0x50);
+ byte |= (1 << 7);
+ pci_write_config8(dev, 0x50, byte);
+ }
+
+ /* RPR6.20 Async Park Mode. */
+ /* RPR recommends not to set these bits. */
+ #if 0
+ dword = pci_read_config32(dev, 0x50);
+ dword |= 1 << 23;
+ if (rev >= REV_SB700_A14) {
+ dword &= ~(1 << 2);
+ }
+ pci_write_config32(dev, 0x50, dword);
+ #endif
+
+ /* RPR6.22 Advance Async Enhancement */
+ /* RPR6.23 USB Periodic Cache Setting */
+ dword = pci_read_config32(dev, 0x50);
+ if (rev == REV_SB700_A12) {
+ dword |= 1 << 28; /* 6.22 */
+ dword |= 1 << 27; /* 6.23 */
+ } else if (rev >= REV_SB700_A14) {
+ dword |= 1 << 3;
+ dword &= ~(1 << 28); /* 6.22 */
+ dword |= 1 << 8;
+ dword &= ~(1 << 27); /* 6.23 */
+ }
+ printk_debug("rpr 6.23, final dword=%x\n", dword);
+#endif
+}
+
+static void usb_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG_DIRECT
+ struct resource *res;
+ u32 base;
+ u32 old_debug;
+
+ old_debug = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+ pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG_DIRECT
+ res = find_resource(dev, 0x10);
+ set_ehci_debug(old_debug);
+ if (!res)
+ return;
+ base = res->base;
+ set_ehci_base(base);
+ report_resource_stored(dev, res, "");
+#endif
+
+}
+
+static struct device_operations usb_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb_set_resources, /* pci_dev_set_resources, */
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver usb_0_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_USB_18_0,
+};
+static struct pci_driver usb_1_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_USB_18_1,
+};
+
+/* the pci id of usb ctrl 0 and 1 are the same. */
+/*
+ * static struct pci_driver usb_3_driver __pci_driver = {
+ * .ops = &usb_ops,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_0,
+ * };
+ * static struct pci_driver usb_4_driver __pci_driver = {
+ * .ops = &usb_ops,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_1,
+ * };
+ */
+
+static struct pci_driver usb_4_driver __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_USB_20_5,
+};
+
+static struct device_operations usb_ops2 = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = usb_set_resources, /* pci_dev_set_resources, */
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init2,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver usb_5_driver __pci_driver = {
+ .ops = &usb_ops2,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_SB700_USB_18_2,
+};
+/*
+ * static struct pci_driver usb_5_driver __pci_driver = {
+ * .ops = &usb_ops2,
+ * .vendor = PCI_VENDOR_ID_ATI,
+ * .device = PCI_DEVICE_ID_ATI_SB700_USB_19_2,
+ * };
+ */
More information about the coreboot
mailing list