[coreboot] Coreboot doesn't boot on Arima HDAMA rev.G mainboard
Joop Boonen
joop_boonen at web.de
Tue May 4 23:59:26 CEST 2010
On Tue, May 4, 2010 8:16 pm, Myles Watson wrote:
> On Tue, May 4, 2010 at 11:54 AM, Myles Watson <mylesgw at gmail.com> wrote:
>>
>>> rev 4920 works without a problem, also with the extracted VGA. I get
>>> the
>>> FILO screen.
>>
>> Great. You could check the values from Kconfig (build/config.h) and
>> compare
>> them to the values from 4920. That would be the easiest thing to fix.
> I think the most likely culprit is SB_HT_CHAIN_ON_BUS0. Could you
> change it to 1 in src/mainboard/arima/hdama/Kconfig, make oldconfig,
> and test?
I've tested it. I get the filo screen now.
When I do a probe I don't see any IDE device yet. Neither IDE nor SATA
SIL3114 drive. This also didn't work for version 4920.
>
> Thanks,
> Myles
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: session_filo_20100504.log
Type: text/x-log
Size: 98720 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100504/b2ea00d1/attachment.log>
More information about the coreboot
mailing list