[coreboot] åå¤: Advice how to install Linux to get it working with FILO
Joop Boonen
joop_boonen at web.de
Wed May 19 08:11:37 CEST 2010
On Wed, May 19, 2010 1:46 am, wangqingpei at gmail.com wrote:
> Hi
> Grub command is fine, what is your problem about filo? send the log if
> you can
The problem is that I see the follwoing in the log:
<quote>
Jumping to entry point...
INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
</quote>
I've also attached the log.
>
> Wang Qing Pei
> Mail: wangqingpei at gmail.com
> Phone:86+013426369984
>
>
> ----- Reply message -----
> åä»¶äººï¼ "Joop Boonen" <joop_boonen at web.de>
> æ¥æï¼ å¨ä¸, 5 æ 19 æ¥, 2010 å¹´ 07:09
> 主é¢ï¼ [coreboot] Advice how to install Linux to get it working with
> FILO
> æ¶ä»¶äººï¼ <coreboot at coreboot.org>
>
> Hello All,
>
> I want to get FILO working on my system (arima/hdama).
> As I want to rule out my Linux installation I have a few questions.
> I've installed openSuSE 11.2 x86_64 on a SATA disk connected to the on
> board SIL3114 controller.
>
> I have the follwoing partitioning.
> 1) /boot about 128 MB
> 2) swap about 2 GB
> 3) /root about 60GB
> 4) /home about 20GB
>
> Is this OK or is there also a track maximum for FILO like existed for
> LILO?
> Is it best to configure FILO with grub commands?
>
> Regards,
>
> Joop.
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: session_w_ide_20105015.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100519/ea50946d/attachment.txt>
More information about the coreboot
mailing list