[coreboot] gPXE not found?!

[Myles Watson]

On Wed, May 19, 2010 at 7:20 AM, Stefan Reinauer
<stefan.reinauer at coresystems.de> wrote:
> Knut, try putting the southbridge on bus 0
I think it is already there, but there is also an 8132 at bus 8.

>>> using genroms/gpxe.rom makes gPXE start but then gPXE isn't able to find
>>> the network devices. When I'm using the vendor and device id
>>> (pci8086,1079.rom) Seabios doesn't map that option rom to the NICs
>>> because  Seabios doesn't see them! (please see attached log)
>>>
>>> What can I do? to scan also 0a:03.0 and 0a:03.1, which would be my NICs?
>>
>> Have you tried adding the root bus 0x0a to config.h?

I should have said bus 8.  From your lspci:

-+-[0000:08]-+-01.0-[09]--
 |           +-01.1  Advanced Micro Devices [AMD] AMD-8132 PCI-X
IOAPIC [1022:7459]
 |           +-02.0-[0a]--+-03.0  Intel Corporation 82546GB Gigabit
Ethernet Controller [8086:1079]
 |           |            \-03.1  Intel Corporation 82546GB Gigabit
Ethernet Controller [8086:1079]
 |           \-02.1  Advanced Micro Devices [AMD] AMD-8132 PCI-X
IOAPIC [1022:7459]

If that lspci doesn't match the enumeration that Coreboot gives it,
use the one that matches your boot logs.

Thanks,
Myles