[coreboot] Indtast Bcc Wyse S10 and coreboot
anders@jenbo.dk
anders at jenbo.dk
Thu May 20 19:27:23 CEST 2010
Can the BIOS be swapped (is it socketed), do you have a spare (or one you fan borrow from motherboard) .
Is the board using a supported or documented SuperIO (use superiotool, the manual, the we or your eyes to see what chip you have).
Is the southbridg supported.
Is the northbridg supported.
Mvh Anders
----- Reply message -----
Fra: "Oliver Schinagl" <oliver at schinagl.nl>
Dato: tor., maj 20, 2010 18:28
Emne: [coreboot] Wyse S10 and coreboot
Til: <coreboot at coreboot.org>
Hello all,
I am very interested in starting to play with coreboot and use it on
some of my systems. I have been interested in coreboot and following it
for a few years now.
I'll skip the chit chat and get straight to it. I got my hands on a few
Wyse S10 thinclients, and they work quite well, booting via PXE or USB.
Recently, I found some cheap Disk on Module 44pin 'ssd' and wanted to
try them out in the S10.
Unforuntatly, I'm getting an error when trying to run someting from it;
that the IDE port has been disabled.
Since getting a bios upgrade (which might not fix it) is a very tedious
task; i decided to look at coreboot.
My question is, I suppose quite simple; Where do I start?
Thanks,
Oliver
--
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100520/17c7f21c/attachment.html>
More information about the coreboot
mailing list