[coreboot] RCA IP1150
gregg.drwho8 at gmail.com
Sat May 29 20:54:42 CEST 2010
On Sat, May 29, 2010 at 2:37 PM, ron minnich <rminnich at gmail.com> wrote:
> I should mention that in parallel universe I work in there's lots of
> weird things going on with gcc. It's a nightmare, highly threaded
> program that blows up with gcc 4.4 ... so we're not alone.
I see your point, Ron. I do indeed. However I did some final analysis
on the output that I can either post here, on the Coreboot list if
you're curious, or not and directly to Joe, the explosion of
complaints happens on my Slackware 12.1 system, simply because that
system is running a later version of the PCI libraries. And the
program builds properly on the other one running Slackware 11.0
because the PCI libraries are older. I am referring to libpci.a here.
According to the lists of installed things, its 2.2.10 for the 12.1
To be honest I really don't know why this is happening:
root at jimkirk2:/usr/src/lobos/stb/trunk/ip1000_tvout# make
gcc -O2 -g -Wall -c -o main.o main.c
gcc -O2 -g -Wall -c -o gmch.o gmch.c
gcc -O2 -g -Wall -c -o i2c.o i2c.c
gcc -O2 -g -Wall -c -o cx2587x.o cx2587x.c
gcc -O2 -g -Wall -c -o i830_video.o i830_video.c
gcc -O2 -g -Wall -c -o video_modes.o video_modes.c
gcc -o ip1000-tvout main.o gmch.o i2c.o cx2587x.o i830_video.o video_modes.o -lp
/usr/lib/gcc/i486-slackware-linux/4.2.3/../../../libpci.a(names.o): In function
names.c:(.text+0x46b): undefined reference to `gzopen'
names.c:(.text+0x4f3): undefined reference to `gzgets'
names.c:(.text+0x54a): undefined reference to `gzeof'
names.c:(.text+0x612): undefined reference to `gzclose'
names.c:(.text+0x783): undefined reference to `gzclose'
names.c:(.text+0x975): undefined reference to `gzerror'
names.c:(.text+0x992): undefined reference to `gzclose'
names.c:(.text+0xa27): undefined reference to `gzopen'
names.c:(.text+0xaa0): undefined reference to `zError'
collect2: ld returned 1 exit status
make: *** [ip1000-tvout] Error 1
And not on the Slackware 11.0 system. It is running the 2.2.3 release.
This is why Joe I asked earlier whose distribution you chose and what
not. For all I know the code in question may have been written not by
you, but by that fellow who discovered how to make TV out work on that
board. There's an excellent write up on www.settoplinux.org that goes
into details leading up to the code, and then the location where it
Depending on when I get the hardware here, it might be one, the one I
asked you about earlier even, or the regular participant, the IP1000
one, we'll be able to resolve this sooner.
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
More information about the coreboot