[coreboot] [PATCH EHCI Debug Port setup for all AMD SB600/SB700 boards

Stefan Reinauer stefan.reinauer at coresystems.de
Fri Sep 24 17:43:57 CEST 2010

 On 9/23/10 11:09 PM, Uwe Hermann wrote:
> For now I marked all chipsets where we have Debug Port code as untested,
> I have a feeling the functionality was rarely tested recently (or at
> all) so we should only mark those chipsets as tested where we actually
> have recent test reports.
Last time I tested on i945 I was able to get output if I called the
debug port output function directly, but it seemed that you would not
get any output from printk as it simply was not hooked up. Has that
changed since then?

> Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.
> Without a (currently) dummy set_debug_port() function the build fails,
> this may or may not be fixed differently in the future.
> Manually build-tested on all SB600/SB700 boards, and tested on hardware on
> one SB600 board I own, works fine.
> Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan at coresystems.de>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100924/84ac8619/attachment.html>

More information about the coreboot mailing list