[coreboot] Advice on how to approach porting old hardware?

Stefan Reinauer stefan.reinauer at coresystems.de
Sat Sep 25 19:17:43 CEST 2010

 On 9/25/10 5:30 PM, ron minnich wrote:
> start with v1 until you're pretty sure it all works, then you could
> try a forward port. The issue with v1 is that the last time we built
> that board was the gcc 2.96 toolchain and we know that toolchain
> version if a factor.
> ron
That said, I got the v1 tree compiling on my system with a gcc 4
toolchain a while ago, but I never tested the resulting binaries as I
don't have any hardware left.


More information about the coreboot mailing list