[coreboot] HP Proliant dl145 g3 Can't read Boot disk
Kevin O'Connor
kevin at koconnor.net
Mon Feb 21 14:53:37 CET 2011
On Sat, Feb 19, 2011 at 06:26:30PM -0500, jarray52 jarray52 wrote:
> Hi,
>
> My HP Proliant dl145 g3 with Coreboot Bios and SeaBIOS payload cannot read
> my hard disk. Here is the serial console output.
>
> http://coreboot.pastebin.com/HYee3u0t
>
> For easy reference, here is the coreboot page on the HP Proliant dl145 g3.
>
> http://www.coreboot.org/HP_DL145_G3
>
> To ensure the problem was not caused by an HP BIOS or the LSI SAS controller
> raid initialization of hard drives, I used a hard drive with OS created on a
> non HP(Asus) without either hardware or software raid. No hard drive with
> boot sector was readable by coreboot/seabios.
The log shows SeaBIOS found an ATA controller, but did not find any
drives attached to the controller. It did not find an option rom on
any cards - so no scsi option rom was run.
Can you post the output of lspci and identify which device you
expected to boot from?
-Kevin
More information about the coreboot
mailing list